Moode Forum

Full Version: USB Audio out with Bluetooth Renderer enabled
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
I am new to Moode, so it is perhaps something I am misunderstanding.

Deployed moode with a pi3, mpd out to usb audio all is well.  Went through all configs, turning things on and suddenly sound stopped.  As I was not sure, I deployed again to make sure everything is reset.

USB out.

Enabled some renders, such as airplay, squeezelite and bluetooth.  My understanding was that this allows me to stream to the device when I do not want to use MPD playback.

Suddenly, I have no audio again, so instead of re-deploying again, I disabled the 3 renderers.  Still no audio via USB.  Checked if there is audio via the headphone output and there is.

I then went into the system settings and disabled BT completely.  Once the system rebooted after disabling BT USB audio was back.

Not sure if this is normal and expected behavior, but thought that before I abandon the idea of BT streaming to the device that I should ask about this.

Thanks.
Squeezelite gets its on/off state from LMS but if LMS is not running then Squeezelite defaults to on and will hog the audio output.
so with that being said, does LMS need to be installed locally to moode? I have a LMS server on a separate system, but was not directing any playback at the the time. LMS and squeeze is not a requirement if that is what causes the break.

If in fact it was a issue with squeezelite, why was it not resolved until BT was disabled?
LMS just has to be running on some host on the network not necessarily moOde host so Squeezelite can contact LMS and determine whether LMS has it turned on or off.

Its not obvious to me what is causing your "no audio" issue. Several of my test systems have Bluetooth, Spotify and Airplay renderers on and all works well.
(07-20-2021, 08:40 PM)Tim Curtis Wrote: [ -> ]LMS just has to be running on some host on the network not necessarily moOde host so Squeezelite can contact LMS and determine whether LMS has it turned on or off.

Its not obvious to me what is causing your "no audio" issue. Several of my test systems have Bluetooth, Spotify and Airplay renderers on and all works well.

OK. Did a test. Turned Bluetooth on and audio was still good via USB.

Connected via Bluetooth from my phone, audio was good. Disconnected phone, mpd did not restart per settings. Hit play, no audio from USB.

Let me know if you need me to collect some logs
To give some more feedback.  I noticed that the volume in the UI was 0 and I was able to change it.  This is strange as I set MPD to fixed in the settings.

Changing the volume level still produced no sound.  Went into the MPD settings and it was on software, so I changed it to fixed and tried to save it, but the save button does not work.  I cannot change and save settings in the MPD menu.

I did try other menus and settings options outside MPD and I am able to save there, so this appears to be some sort of MPD related issue maybe?

I do see this in the log during playback:
ALSA lib ../../../src/asound/bluealsa-pcm.c:865Sad_snd_pcm_bluealsa_open) Invalid BT device address: XX:XX:XX:XX:XX:XX

And perhaps it is a Bluez bug?
Crash when disconnecting ALSA Bluetooth audio · Issue #1037 · MusicPlayerDaemon/MPD · GitHub

To help me understand it, is the error saying this is an issue when using USB DAC?

BT streaming is not critical to my needs, but it was certainly going to be a nice to have.  Alternatives might be airplay from an ipad instead, will test.  Or possibly a non-USB dac, might be able to test that too.
In BlueZ Config if you have "MPD Audio output -> Bluetooth" configured, the SAVE button in MPD Config will be disabled to preserve the MPD configuration for "MPD Audio output -> Local".

Post the Moode startup log. Maybe there will be some log entries that might indicate whats going on.

Code:
moodeutl -l
(07-23-2021, 08:05 PM)Tim Curtis Wrote: [ -> ]In BlueZ Config if you have "MPD Audio output -> Bluetooth" configured, the SAVE button in MPD Config will be disabled to preserve the MPD configuration for "MPD Audio output -> Local".

Post the Moode startup log. Maybe there will be some log entries that might indicate whats going on.

Code:
moodeutl -l


collected the log when things were working
Code:
pi@moode:~ $ moodeutl -l
20210728 213410 worker: -- Start
20210728 213410 worker: Successfully daemonized
20210728 213411 worker: Integrity check (passed)
20210728 213411 worker: File check (OK)
20210728 213412 worker: Session vacuumed
20210728 213412 worker: Session loaded
20210728 213412 worker: Debug logging (ON)
20210728 213412 worker: -- Audio debug
20210728 213412 worker: ALSA cards: (0:b1 | 1:Headphones | 2:Device | 3:empty
20210728 213412 worker: MPD config: (2:USB Audio Device | mixer:(Speaker) | card:2)
20210728 213412 worker: ALSA mixer actual (Speaker)
20210728 213412 worker: ALSA Speaker volume set to (0%)
20210728 213412 worker: -- System
20210728 213414 worker: Host     (moode)
20210728 213414 worker: moOde    (7.3.0 2021-06-25)
20210728 213414 worker: RaspiOS  (10.6)
20210728 213414 worker: Kernel   (5.4.77-v7+ #1371)
20210728 213414 worker: Platform (Pi-3B+ 1.3 1GB)
20210728 213414 worker: ARM arch (armv7l, 32-bit kernel)
20210728 213414 worker: MPD ver  (0.22.8_p0x3)
20210728 213414 worker: CPU gov  (ondemand)
20210728 213414 worker: USB boot enabled
20210728 213414 worker: File system not expanded yet
20210728 213414 worker: HDMI port on
20210728 213414 worker: -- Network
20210728 213414 worker: eth0 exists
20210728 213414 worker: IP addr (192.168.0.164)
20210728 213414 worker: Netmask (255.255.255.0)
20210728 213414 worker: Gateway (192.168.0.2)
20210728 213414 worker: Pri DNS (192.168.0.248)
20210728 213414 worker: Domain  (empress.local)
20210728 213415 worker: wlan0 exists
20210728 213415 worker: wifi country (US)
20210728 213415 worker: wlan0 SSID is blank
20210728 213415 worker: eth0 addr exists, AP mode not started
20210728 213415 worker: wlan0 address not assigned
20210728 213415 worker: Pi integrated wlan0 power save disabled
20210728 213415 worker: -- Audio config
20210728 213415 worker: ALSA card number (2)
20210728 213415 worker: MPD audio output (USB Audio Device)
20210728 213415 worker: Audio formats (S16_LE)
20210728 213415 worker: ALSA mixer name (Speaker)
20210728 213415 worker: MPD volume control (none)
20210728 213415 worker: Hdwr volume controller exists
20210728 213415 worker: Max ALSA volume (100%)
20210728 213415 worker: ALSA output mode (Default: plughw)
20210728 213415 worker: ALSA loopback (Off)
20210728 213415 worker: Reset renderer active flags
20210728 213415 worker: CamillaDSP (off)
20210728 213415 worker: -- MPD startup
20210728 213415 worker: MPD started
20210728 213415 openMpdSocket(): error: connection failed (1) 111, Connection refused
20210728 213416 worker: MPD accepting connections
20210728 213416 worker: MPD output 1 ALSA Default (on)
20210728 213416 worker: MPD output 2 ALSA Bluetooth (off)
20210728 213416 worker: MPD output 3 HTTP Server (on)
20210728 213416 worker: MPD crossfade (8 secs)
20210728 213416 worker: MPD ignore CUE files (yes)
20210728 213416 worker: -- Feature availability
20210728 213416 worker: Source select (available)
20210728 213416 worker: Source select (source: MPD)
20210728 213416 worker: Source select (output: USB Audio Device)
20210728 213423 worker: Bluetooth (available: started)
20210728 213423 worker: Airplay renderer (available)
20210728 213423 worker: Spotify renderer (available)
20210728 213423 worker: Squeezelite (available)
20210728 213423 worker: RoonBridge renderer (not installed)
20210728 213423 worker: UPnP renderer (available)
20210728 213423 worker: DLNA server (available)
20210728 213423 worker: UPnP browser (available)
20210728 213423 worker: GPIO button handler (available)
20210728 213423 worker: Stream recorder (n/a)
20210728 213423 worker: -- Music sources
20210728 213423 worker: USB sources (none attached)
20210728 213423 worker: NAS and UPnP sources (none configured)
20210728 213423 worker: -- Other
20210728 213423 worker: USB volume knob (Off)
20210728 213423 worker: USB auto-mounter (udisks-glue)
20210728 213423 worker: LED0 (On)
20210728 213423 worker: LED1 (On)
20210728 213423 worker: Saved MPD vol level (0)
20210728 213423 worker: Preamp volume level (0)
20210728 213423 worker: MPD volume level (0) restored
20210728 213424 worker: ALSA Speaker volume (100%)
20210728 213424 worker: Auto-play (On)
20210728 213424 worker: Auto-playing id (48)
20210728 213424 worker: Maintenance interval (3 hours)
20210728 213424 worker: Screen saver activation (Never)
20210728 213424 worker: Session permissions (OK)
20210728 213424 worker: Watchdog started
20210728 213424 worker: Ready
20210728 213756 enhanceMetadata(): error: currentsong file is NULL
20210728 213805 waitWorker(): Start (lib-config, w_active=0)
20210728 213805 waitWorker(): End   (lib-config, w_active=0)
20210728 213805 enhanceMetadata(): error: currentsong file is NULL
20210728 213811 waitWorker(): Start (lib-config, w_active=1)
20210728 213812 waitWorker(): Wait  (1)
20210728 213813 worker: Job regen_library
20210728 213813 waitWorker(): Wait  (2)
20210728 213813 waitWorker(): End   (lib-config, w_active=0)
20210728 213813 enhanceMetadata(): error: currentsong file is NULL
20210728 213813 enhanceMetadata(): error: currentsong file is NULL
20210728 213813 enhanceMetadata(): error: currentsong file is NULL
20210728 213813 thmcache: Start
20210728 213813 thmcache: Priority: Embedded cover
20210728 213813 thmcache: Res,Qual: Auto
20210728 213813 thmcache: Px ratio: 1
20210728 213813 thmcache: Th width: 100
20210728 213813 thmcache: Thm qual: 75
20210728 213813 thmcache: Scanning: NAS, SDCARD, UPNP
20210728 213813 thmcache: Done: 2 folders scanned, 1 thumbs created, 1 already in cache.
20210728 213816 worker: Job regen_library done
20210728 214751 waitWorker(): Start (lib-config, w_active=0)
20210728 214751 waitWorker(): End   (lib-config, w_active=0)
20210728 214752 enhanceMetadata(): error: currentsong file is NULL
20210728 214754 waitWorker(): Start (lib-config, w_active=0)
20210728 214754 waitWorker(): End   (lib-config, w_active=0)
20210728 214755 enhanceMetadata(): error: currentsong file is NULL
20210728 214815 waitWorker(): Start (lib-config, w_active=0)
20210728 214815 waitWorker(): End   (lib-config, w_active=0)
20210728 214816 enhanceMetadata(): error: currentsong file is NULL
20210728 214821 waitWorker(): Start (snd-config, w_active=0)
20210728 214821 waitWorker(): End   (snd-config, w_active=0)
20210728 214821 enhanceMetadata(): error: currentsong file is NULL
20210728 215006 waitWorker(): Start (lib-config, w_active=0)
20210728 215006 waitWorker(): End   (lib-config, w_active=0)
20210728 215006 enhanceMetadata(): error: currentsong file is NULL
20210728 215029 waitWorker(): Start (lib-config, w_active=0)
20210728 215029 waitWorker(): End   (lib-config, w_active=0)
20210728 215030 enhanceMetadata(): error: currentsong file is NULL
20210728 215107 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215118 enhanceMetadata(): error: currentsong file is NULL
20210728 215142 Default|Pure Black|0,0,0
20210728 215149 waitWorker(): Start (inp-config, w_active=0)
20210728 215149 waitWorker(): End   (inp-config, w_active=0)
20210728 215149 enhanceMetadata(): error: currentsong file is NULL
20210728 215213 waitWorker(): Start (lib-config, w_active=0)
20210728 215213 waitWorker(): End   (lib-config, w_active=0)
20210728 215213 enhanceMetadata(): error: currentsong file is NULL
20210728 215227 waitWorker(): Start (lib-config, w_active=1)
20210728 215228 waitWorker(): Wait  (1)
20210728 215228 worker: Job regen_library
20210728 215229 enhanceMetadata(): error: currentsong file is NULL
20210728 215229 enhanceMetadata(): error: currentsong file is NULL
20210728 215229 enhanceMetadata(): error: currentsong file is NULL
20210728 215229 thmcache: Start
20210728 215229 thmcache: Priority: Embedded cover
20210728 215229 thmcache: Res,Qual: Auto
20210728 215229 thmcache: Px ratio: 1
20210728 215229 thmcache: Th width: 100
20210728 215229 thmcache: Thm qual: 75
20210728 215229 thmcache: Scanning: NAS, SDCARD, UPNP
20210728 215229 thmcache: Done: 2 folders scanned, 0 thumbs created, 2 already in cache.
20210728 215229 waitWorker(): Wait  (2)
20210728 215229 waitWorker(): End   (lib-config, w_active=0)
20210728 215229 enhanceMetadata(): error: currentsong file is NULL
20210728 215232 worker: Job regen_library done
20210728 215249 waitWorker(): Start (snd-config, w_active=0)
20210728 215249 waitWorker(): End   (snd-config, w_active=0)
20210728 215249 enhanceMetadata(): error: currentsong file is NULL
20210728 215254 enhanceMetadata(): error: currentsong file is NULL
20210728 215314 enhanceMetadata(): error: currentsong file is NULL
20210728 215314 enhanceMetadata(): error: currentsong file is NULL
20210728 215314 enhanceMetadata(): error: currentsong file is NULL
20210728 215314 enhanceMetadata(): error: currentsong file is NULL
20210728 215316 enhanceMetadata(): error: currentsong file is NULL
20210728 215317 enhanceMetadata(): error: currentsong file is NULL
20210728 215333 enhanceMetadata(): error: currentsong file is NULL
20210728 215337 enhanceMetadata(): error: currentsong file is NULL
20210728 215339 enhanceMetadata(): error: currentsong file is NULL
pi@moode:~ $

then connected my phone to BT, played audio, then disconnected and MPD has no audio on USB.

Code:
pi@moode:~ $ moodeutl -l
20210728 213410 worker: -- Start
20210728 213410 worker: Successfully daemonized
20210728 213411 worker: Integrity check (passed)
20210728 213411 worker: File check (OK)
20210728 213412 worker: Session vacuumed
20210728 213412 worker: Session loaded
20210728 213412 worker: Debug logging (ON)
20210728 213412 worker: -- Audio debug
20210728 213412 worker: ALSA cards: (0:b1 | 1:Headphones | 2:Device | 3:empty
20210728 213412 worker: MPD config: (2:USB Audio Device | mixer:(Speaker) | card:2)
20210728 213412 worker: ALSA mixer actual (Speaker)
20210728 213412 worker: ALSA Speaker volume set to (0%)
20210728 213412 worker: -- System
20210728 213414 worker: Host     (moode)
20210728 213414 worker: moOde    (7.3.0 2021-06-25)
20210728 213414 worker: RaspiOS  (10.6)
20210728 213414 worker: Kernel   (5.4.77-v7+ #1371)
20210728 213414 worker: Platform (Pi-3B+ 1.3 1GB)
20210728 213414 worker: ARM arch (armv7l, 32-bit kernel)
20210728 213414 worker: MPD ver  (0.22.8_p0x3)
20210728 213414 worker: CPU gov  (ondemand)
20210728 213414 worker: USB boot enabled
20210728 213414 worker: File system not expanded yet
20210728 213414 worker: HDMI port on
20210728 213414 worker: -- Network
20210728 213414 worker: eth0 exists
20210728 213414 worker: IP addr (192.168.0.164)
20210728 213414 worker: Netmask (255.255.255.0)
20210728 213414 worker: Gateway (192.168.0.2)
20210728 213414 worker: Pri DNS (192.168.0.248)
20210728 213414 worker: Domain  (empress.local)
20210728 213415 worker: wlan0 exists
20210728 213415 worker: wifi country (US)
20210728 213415 worker: wlan0 SSID is blank
20210728 213415 worker: eth0 addr exists, AP mode not started
20210728 213415 worker: wlan0 address not assigned
20210728 213415 worker: Pi integrated wlan0 power save disabled
20210728 213415 worker: -- Audio config
20210728 213415 worker: ALSA card number (2)
20210728 213415 worker: MPD audio output (USB Audio Device)
20210728 213415 worker: Audio formats (S16_LE)
20210728 213415 worker: ALSA mixer name (Speaker)
20210728 213415 worker: MPD volume control (none)
20210728 213415 worker: Hdwr volume controller exists
20210728 213415 worker: Max ALSA volume (100%)
20210728 213415 worker: ALSA output mode (Default: plughw)
20210728 213415 worker: ALSA loopback (Off)
20210728 213415 worker: Reset renderer active flags
20210728 213415 worker: CamillaDSP (off)
20210728 213415 worker: -- MPD startup
20210728 213415 worker: MPD started
20210728 213415 openMpdSocket(): error: connection failed (1) 111, Connection refused
20210728 213416 worker: MPD accepting connections
20210728 213416 worker: MPD output 1 ALSA Default (on)
20210728 213416 worker: MPD output 2 ALSA Bluetooth (off)
20210728 213416 worker: MPD output 3 HTTP Server (on)
20210728 213416 worker: MPD crossfade (8 secs)
20210728 213416 worker: MPD ignore CUE files (yes)
20210728 213416 worker: -- Feature availability
20210728 213416 worker: Source select (available)
20210728 213416 worker: Source select (source: MPD)
20210728 213416 worker: Source select (output: USB Audio Device)
20210728 213423 worker: Bluetooth (available: started)
20210728 213423 worker: Airplay renderer (available)
20210728 213423 worker: Spotify renderer (available)
20210728 213423 worker: Squeezelite (available)
20210728 213423 worker: RoonBridge renderer (not installed)
20210728 213423 worker: UPnP renderer (available)
20210728 213423 worker: DLNA server (available)
20210728 213423 worker: UPnP browser (available)
20210728 213423 worker: GPIO button handler (available)
20210728 213423 worker: Stream recorder (n/a)
20210728 213423 worker: -- Music sources
20210728 213423 worker: USB sources (none attached)
20210728 213423 worker: NAS and UPnP sources (none configured)
20210728 213423 worker: -- Other
20210728 213423 worker: USB volume knob (Off)
20210728 213423 worker: USB auto-mounter (udisks-glue)
20210728 213423 worker: LED0 (On)
20210728 213423 worker: LED1 (On)
20210728 213423 worker: Saved MPD vol level (0)
20210728 213423 worker: Preamp volume level (0)
20210728 213423 worker: MPD volume level (0) restored
20210728 213424 worker: ALSA Speaker volume (100%)
20210728 213424 worker: Auto-play (On)
20210728 213424 worker: Auto-playing id (48)
20210728 213424 worker: Maintenance interval (3 hours)
20210728 213424 worker: Screen saver activation (Never)
20210728 213424 worker: Session permissions (OK)
20210728 213424 worker: Watchdog started
20210728 213424 worker: Ready
20210728 213756 enhanceMetadata(): error: currentsong file is NULL
20210728 213805 waitWorker(): Start (lib-config, w_active=0)
20210728 213805 waitWorker(): End   (lib-config, w_active=0)
20210728 213805 enhanceMetadata(): error: currentsong file is NULL
20210728 213811 waitWorker(): Start (lib-config, w_active=1)
20210728 213812 waitWorker(): Wait  (1)
20210728 213813 worker: Job regen_library
20210728 213813 waitWorker(): Wait  (2)
20210728 213813 waitWorker(): End   (lib-config, w_active=0)
20210728 213813 enhanceMetadata(): error: currentsong file is NULL
20210728 213813 enhanceMetadata(): error: currentsong file is NULL
20210728 213813 enhanceMetadata(): error: currentsong file is NULL
20210728 213813 thmcache: Start
20210728 213813 thmcache: Priority: Embedded cover
20210728 213813 thmcache: Res,Qual: Auto
20210728 213813 thmcache: Px ratio: 1
20210728 213813 thmcache: Th width: 100
20210728 213813 thmcache: Thm qual: 75
20210728 213813 thmcache: Scanning: NAS, SDCARD, UPNP
20210728 213813 thmcache: Done: 2 folders scanned, 1 thumbs created, 1 already in cache.
20210728 213816 worker: Job regen_library done
20210728 214751 waitWorker(): Start (lib-config, w_active=0)
20210728 214751 waitWorker(): End   (lib-config, w_active=0)
20210728 214752 enhanceMetadata(): error: currentsong file is NULL
20210728 214754 waitWorker(): Start (lib-config, w_active=0)
20210728 214754 waitWorker(): End   (lib-config, w_active=0)
20210728 214755 enhanceMetadata(): error: currentsong file is NULL
20210728 214815 waitWorker(): Start (lib-config, w_active=0)
20210728 214815 waitWorker(): End   (lib-config, w_active=0)
20210728 214816 enhanceMetadata(): error: currentsong file is NULL
20210728 214821 waitWorker(): Start (snd-config, w_active=0)
20210728 214821 waitWorker(): End   (snd-config, w_active=0)
20210728 214821 enhanceMetadata(): error: currentsong file is NULL
20210728 215006 waitWorker(): Start (lib-config, w_active=0)
20210728 215006 waitWorker(): End   (lib-config, w_active=0)
20210728 215006 enhanceMetadata(): error: currentsong file is NULL
20210728 215029 waitWorker(): Start (lib-config, w_active=0)
20210728 215029 waitWorker(): End   (lib-config, w_active=0)
20210728 215030 enhanceMetadata(): error: currentsong file is NULL
20210728 215107 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215115 enhanceMetadata(): error: currentsong file is NULL
20210728 215118 enhanceMetadata(): error: currentsong file is NULL
20210728 215142 Default|Pure Black|0,0,0
20210728 215149 waitWorker(): Start (inp-config, w_active=0)
20210728 215149 waitWorker(): End   (inp-config, w_active=0)
20210728 215149 enhanceMetadata(): error: currentsong file is NULL
20210728 215213 waitWorker(): Start (lib-config, w_active=0)
20210728 215213 waitWorker(): End   (lib-config, w_active=0)
20210728 215213 enhanceMetadata(): error: currentsong file is NULL
20210728 215227 waitWorker(): Start (lib-config, w_active=1)
20210728 215228 waitWorker(): Wait  (1)
20210728 215228 worker: Job regen_library
20210728 215229 enhanceMetadata(): error: currentsong file is NULL
20210728 215229 enhanceMetadata(): error: currentsong file is NULL
20210728 215229 enhanceMetadata(): error: currentsong file is NULL
20210728 215229 thmcache: Start
20210728 215229 thmcache: Priority: Embedded cover
20210728 215229 thmcache: Res,Qual: Auto
20210728 215229 thmcache: Px ratio: 1
20210728 215229 thmcache: Th width: 100
20210728 215229 thmcache: Thm qual: 75
20210728 215229 thmcache: Scanning: NAS, SDCARD, UPNP
20210728 215229 thmcache: Done: 2 folders scanned, 0 thumbs created, 2 already in cache.
20210728 215229 waitWorker(): Wait  (2)
20210728 215229 waitWorker(): End   (lib-config, w_active=0)
20210728 215229 enhanceMetadata(): error: currentsong file is NULL
20210728 215232 worker: Job regen_library done
20210728 215249 waitWorker(): Start (snd-config, w_active=0)
20210728 215249 waitWorker(): End   (snd-config, w_active=0)
20210728 215249 enhanceMetadata(): error: currentsong file is NULL
20210728 215254 enhanceMetadata(): error: currentsong file is NULL
20210728 215314 enhanceMetadata(): error: currentsong file is NULL
20210728 215314 enhanceMetadata(): error: currentsong file is NULL
20210728 215314 enhanceMetadata(): error: currentsong file is NULL
20210728 215314 enhanceMetadata(): error: currentsong file is NULL
20210728 215316 enhanceMetadata(): error: currentsong file is NULL
20210728 215317 enhanceMetadata(): error: currentsong file is NULL
20210728 215333 enhanceMetadata(): error: currentsong file is NULL
20210728 215337 enhanceMetadata(): error: currentsong file is NULL
20210728 215339 enhanceMetadata(): error: currentsong file is NULL
20210728 234146 waitWorker(): Start (blu-config, w_active=0)
20210728 234146 waitWorker(): End   (blu-config, w_active=0)
20210728 234200 waitWorker(): Start (blu-config, w_active=0)
20210728 234200 waitWorker(): End   (blu-config, w_active=0)
20210728 234200 enhanceMetadata(): error: currentsong file is NULL
20210728 234200 enhanceMetadata(): error: currentsong file is NULL
20210728 234932 waitWorker(): Start (blu-config, w_active=0)
20210728 234932 waitWorker(): End   (blu-config, w_active=0)
pi@moode:~ $
I don't see anything unusual in the log.

Do you disconnect your phone via BlueZ Config or via the phone?
When u open BlueZ Config is MPD Audio output set to Local or Bluetooth?
(07-29-2021, 09:39 PM)Tim Curtis Wrote: [ -> ]I don't see anything unusual in the log.

Do you disconnect your phone via BlueZ Config or via the phone?
When u open BlueZ Config is MPD Audio output set to Local or Bluetooth?

I disconnected using the disconnect button on the blue page.

MPD Audio showing Bluetooth. 

Switched back to local, had to hit play as this stopped/paused mpd playback and not I have audio via USB again. 

No sure what this means or why mpd audio was suddenly set to Bluetooth vs local after disconnecting.
Pages: 1 2