(12-21-2020, 12:06 PM)Jempie Wrote: [ -> ]Hi,
How can I update Moode, without change everything that's been done to make the Mini Kit working?
Luckily I made and backup first because nothing works anymore now display...
thanks
The latest version of moode is only available as a new image, no update. Download new image then follow TookaFace instructions to get your mini kit working, I was up and running with display and remote in under 30 minutes.
@
audiophonics could You please give some instructions, how to change the input from MPD to S/PDIF using lirc and remote control? I`m trying to figure it out, tried with the spdif.sh file (following the instructions on 1st page) but it didn`t work for me (on both 7.0.0 and 7.0.1 mOode vesrion). I don`t have RaspDAC Mini, I have Your seperate ES9038Q2M DAC with RPi4 and PI SPC V2 power management module in self-built streamer. I`m not using Your remote control, I have paired my own form Naim integrated amp, but i guess that`s not a big deal. I would be grateful for some help.
Okay, so I think I made switching SPDIF/I2S with lirc finally work. It would have worked from the very begining, but I haven`t spotted one very important thing. Brainlessly I`ve been pasteing:
begin
prog = irexec
button = KEY_MENU
config = if amixer sget -c 1 'I2S/SPDIF Select' | grep Item0: | grep -q I2S;then amixer sset -c 1 'I2S/SPDIF Select' SPDIF; else amixer sset -c 1 'I2S/SPDIF Select' I2S; fi
end
to my lircrc file. In Putty I have applied command "irexec" which (after pushing button responsible for switching) showed that the device is wrong. All I had to do was to make only a few changes in those lines - changing "-c 1" to "-c 0":
begin
prog = irexec
button = KEY_MENU
config = if amixer sget -c 0 'I2S/SPDIF Select' | grep Item0: | grep -q I2S;then amixer sset -c 0 'I2S/SPDIF Select' SPDIF; else amixer sset -c 0 'I2S/SPDIF Select' I2S; fi
end
Everything works fine now
Hi Rikardo,
hope you can help me out
i have the Mini Kit of Audiophonics and use the 7.9 inch HMD LCD
how can i use it?
thanks
(10-01-2020, 07:42 AM)TookaFace Wrote: [ -> ]Updated procedure for moOde 6.6 ==> moOde 7.4.0:
I've added a system menu in oled display, where you can reboot/shutdown the raspdacmini.
Code:
sudo apt update
sudo apt-get -y install python-smbus libjpeg-dev lirc
You could have a problem during lirc install, it's normal.
Code:
sudo -i pip install --upgrade pip setuptools
sudo -H pip install 'luma.core==1.13.0' 'luma.oled==3.4.0'
Add at the end of /boot/config.txt:
Code:
dtparam=spi=on
dtoverlay=gpio-ir,gpio_pin=4
Download and install oled and lirc files:
Code:
wget -O raspdacmini.tar "https://drive.google.com/uc?export=download&id=11W2kV4M55jKDbQk8qEkaiBZqKe6l0V_L"
tar xvf raspdacmini.tar
sudo chmod 755 oled/raspdac_oled_main.py
sudo chmod 644 oled/oled.service
sudo cp oled/oled.service /etc/systemd/system/
sudo systemctl enable oled
sudo cp -r lirc/* /etc/lirc
sudo cp serial.py /usr/local/lib/python2.7/dist-packages/luma/core/interface/serial.py
rm -r lirc
rm raspdacmini.tar
If you had problems during lirc install:
Code:
sudo apt-get install -f
Then reboot:
I have successfully integrated Oled/IR to moode 7.6.0 by just following TookaFace's instruction.
posting here just for reporting purpose.
Hiroyuki
[quote pid='38495' dateline='1638163121']
I have successfully integrated Oled/IR to moode 7.6.0 by just following TookaFace's instruction.
posting here just for reporting purpose.
Hiroyuki
[/quote]
please note that i meant i did it to RaspDac Mini with built-in OLED, not to a plain vanilla raspberry system.
Anyone tried this with moode 8.0.0?
Hello,
I have a problem with my RaspDAC Mini LCD. I installed Moode 8 and then did everything as described on this GitHub page,
https://github.com/audiophonics/RaspDacMinilcd
Unfortunately, I don't get a proper cover view screen. The screen looks permanently like on the picture.
I tried the troubleshooting as described on GitHub without any help.
Does anyone of you has an idea how to solve this?
As expected, my procedure is no longer working for moOde 8 series, i will try to update it.