[PROBLEM] Cannot turn on eq - either - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7) +--- Thread: [PROBLEM] Cannot turn on eq - either (/showthread.php?tid=1283) |
Cannot turn on eq - either - michaelagiles - 04-19-2019 I just installed 5>0 - and I am unable to turn on the graphic eq - or para for that matter. No option in the box but "Off"! Is there a setting that would disable it? ALSA setting all default - "YES" Polarity inversion? Thanks MG RE: Cannot turn on eq - either - JST1963 - 04-19-2019 (04-19-2019, 05:51 PM)michaelagiles Wrote: I just installed 5>0 - and I am unable to turn on the graphic eq - or para for that matter. No option in the box but "Off"! Did you activate, by any chance, the "Crossfeed" option? RE: Cannot turn on eq - either - michaelagiles - 04-19-2019 No - but I just checked and if I invert polarity EQ doesn't work. Or if I use EQ - Polarity inversion doesn't work. They seem to be mutually exclusive. Bug or unavoidable? Thanks! RE: Cannot turn on eq - either - Tim Curtis - 04-19-2019 They are mutually exclusive. Crossfeed Graphic EQ Parametric EQ Polarity Inversion RE: Cannot turn on eq - either - JST1963 - 04-19-2019 (04-19-2019, 06:48 PM)Tim Curtis Wrote: They are mutually exclusive. Any chance they're put together again in the config menus, as before (well, Polarity wasn't here...) Or at least a remark in the info page going with the setting? Johan RE: Cannot turn on eq - either - energyi - 02-24-2020 (04-19-2019, 06:48 PM)Tim Curtis Wrote: They are mutually exclusive. Seems to me Crossfeed is different from EQ. Any chance for the wish list can add both Crossfeed and one form of EQ? Thanks for the music. Energyi RE: Cannot turn on eq - either - Tim Curtis - 02-24-2020 It would take someone with expertise in ALSA to create the configs that would allow something like below. Crossfeed -> EQ -> Audio Device Crossfeed -> EQ -> Polarity Inversion -> Audio Device Currently moOde can only do like below. Crossfeed -> Audio Device EQ -> Audio Devide Polarity Inversion -> Audio Device If a dev volunteers to work on chaining the DSP's I'll try to integrate it into moOde. |