Moode Forum
[PROBLEM] Allo Boss V1.2 driver options - Printable Version

+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [PROBLEM] Allo Boss V1.2 driver options (/showthread.php?tid=1702)



Allo Boss V1.2 driver options - Bourneendboy - 09-08-2019

I have just set up the latest Moode with my Allo Boss V1.2 and not sure about the driver options setting.
Could someone please advise whether I should set to-
Slave enabled or slave disabled?

Many thanks,

Bill


RE: Allo Boss V1.2 driver options - DRONE7 - 09-08-2019

If you're using Pi and the Boss with no other intermediate devices then set slave disabled and the boss provides the master clocking.

(I don't have access to moOde at the moment but seem to recall that there are @i info icons next to each option ?? You can click on those for more details Smile


RE: Allo Boss V1.2 driver options - Bourneendboy - 09-08-2019

Many thanks, I have it set at 'disabled' so will leave as is?


RE: Allo Boss V1.2 driver options - Tim Curtis - 09-08-2019

The "slave Enabled" option was added by Allo to allow the Boss DAC to be used with their Kali Reclocker. The option configures the Boss to run in slave mode and use the Kali high precision clocks.


RE: Allo Boss V1.2 driver options - mrdrew - 04-12-2020

[attachment=1128]