[PROBLEM] I can not change volume control in settings mpd - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7) +--- Thread: [PROBLEM] I can not change volume control in settings mpd (/showthread.php?tid=2285) |
I can not change volume control in settings mpd - devGoodCat - 03-22-2020 Hi! Config: Release Information
In settings Audio: I2S audio device: HiFiBerry Digi(Digi+) In settings MPD: Device type: I2S audio device Volume control: Software Not possible to change volume control on the Disabled, after click save - setting changes back to software. Help me please. [size=undefined] [/size] RE: I can not change volume control in settings mpd - Tim Curtis - 03-22-2020 Raspbian: null suggests a broken image. RE: I can not change volume control in settings mpd - devGoodCat - 03-22-2020 (03-22-2020, 03:58 PM)Tim Curtis Wrote: Raspbian: null suggests a broken image. can this be fixed through the console? RE: I can not change volume control in settings mpd - Tim Curtis - 03-22-2020 Best bet is to start with fresh, stock image downloaded from moodeaudio.org and burned to a known good SDCard. Boot it up and verify that the Moode log is error free. moodeutl -l RE: I can not change volume control in settings mpd - devGoodCat - 03-22-2020 Raspbian: null image become after installation pydPiper RE: I can not change volume control in settings mpd - Tim Curtis - 03-22-2020 A lot of people use balenaEtcher and report that it works really well. https://www.balena.io/etcher/ RE: I can not change volume control in settings mpd - devGoodCat - 03-22-2020 After: sudo apt-get remove pydPiper image Raspbian established back RE: I can not change volume control in settings mpd - Tim Curtis - 03-22-2020 Interesting. You should prolly post the issue in the pydPiper thread. |