Moode Forum
how to setup wlan0 and eth0 on different subnet - Printable Version

+- Moode Forum (http://moodeaudio.org/forum)
+-- Forum: Community (http://moodeaudio.org/forum/forumdisplay.php?fid=18)
+--- Forum: Uncategorized (http://moodeaudio.org/forum/forumdisplay.php?fid=21)
+--- Thread: how to setup wlan0 and eth0 on different subnet (/showthread.php?tid=2304)



how to setup wlan0 and eth0 on different subnet - meineoper - 03-27-2020

Hello everybody,

I use wifi to connect LAN on a class B network (10.34.0.0). I try to connect my NAS directly via the RJ45 port to (without hub/switch) which my NAS IP is 169.254.254.2, which its stand alone.

i set my Moode IP (in Moode Audio interface) as:

ETHERNET
address assignment = STATIC
IP ADDRESS = 169.254.254.9
NETMARK = 255.255.255.0
GATEWAY, Primary DNS and Secondary DNS are blank

Wireless (WIFI)
address assignment = STATIC
IP Address = 10.34.10.199
NETMASK = 255.255.0.0
GATEWAY, Primary DNS and Secondary DNS are blank

The wifi works fine. But when I plug in the network cable which from the NAS directly, then I will lose my Moode. I need to unplug the cable and turn off/on my Moode manually then it can come back.

Shall I add another route for 169.254.254.0 in manually?

Please help me. thank you!

Have a nice day,

Joseph