Moode Forum
[PROBLEM] No sound after activating "Rotary encoder" - Printable Version

+- Moode Forum (http://moodeaudio.org/forum)
+-- Forum: moOde audio player (http://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (http://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [PROBLEM] No sound after activating "Rotary encoder" (/showthread.php?tid=2647)



No sound after activating "Rotary encoder" - lorenzo - 06-10-2020

Hi Forum!
There is no sound after activating the "Rotary encoder" setting. Independent of the rotary encoder is connected or not.
Setup: RPI 3B+ - HiFiBerry Amp2 - KY-040 rotary encoder - Moode 6.5.2.
Best regards


RE: No sound after activating "Rotary encoder" - Tim Curtis - 06-10-2020

Works ok on my end regardless of whether the Pi has an encoder connected or not.

The rotary encoder driver is designed for a 3 pin encoder. Maybe there is an incompatibility between the driver and the 5 pin encoder that u are using?


RE: No sound after activating "Rotary encoder" - lorenzo - 06-10-2020

Tim thanks for the fast answer. If I rotate the rotary encoder the volume changes, but there is no sound. Strange.


RE: No sound after activating "Rotary encoder" - lorenzo - 06-11-2020

I made a new fresh installation and now it works like a charm.


RE: No sound after activating "Rotary encoder" - Tim Curtis - 06-11-2020

Nice :-)