[PROBLEM] WiFi (AP) and CAT-5 together

[Meestor_X]

In my testing, here is what I observed when powering on the "Moode" RPI:
If the wired LAN is disconnected, the RPI (eventually) becomes a WiFi AP.
If the wired LAN is connected, the RPI WiFi AP does not start.
If the wired LAN is disconnected and the WiFi AP starts, you can then connect the wired LAN and both will be operational.

Whatever my reasons for wanting both, it would be nice if "both enabled" could be the default so that I wouldn't need to disconnect the wired LAN and reboot to enable them both as I do now.