The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 906 - File: showthread.php PHP 7.2.32 (Linux)
File Line Function
/showthread.php 906 errorHandler->error



Thank you for your donation!


Problem: Library build problem with my Audiophonics ES09038q2m RaspTouch
#1
Hello to all MoodeUsers,
thanks for the nice piece of software. It is always a pleasure listen to my Audiophonics ES9038q2m, running with Moode.
I am using Moode since 6.2 running perfect. Installation and adding the audiophonics power management was  very easy. The update to 6.3 was a piece of cake. With the upgrade to 6.4 i ran into trouble connecting to my NAS and the power management did not work anymore. So i did a fresh install, installing the power management worked. But the connection to my NAS is still not working. I am not shure if it is a Moode problem, it might be a network related problem.
This is what happens. Installation works normal, listening to Internet Radios is no problem (but sometimes stops). I can find the Moode from other Computers in the Network, acces via Browser is normal. If i create the music source with Configuration Settings i can not mount my NAS connected by Ethernet to my Fritz-Box. Scanning for the Path produces the following: "mbXcli_negprot_smb1_done: No compatible protocol selected by server.". By typing the path manually i have MPD running for a finding the first entry's of my music files on the NAS. Then it stops running, sometimes with the message:"MPD error openMpdSock() failed".


Any help is appreciated!

Maartin

Code:
M O O D E   S T A R T U P   L O G

20191130 203550 worker: -- Start
20191130 203551 worker: Successfully daemonized
20191130 203551 worker: Integrity check (passed)
20191130 203551 worker: Session loaded
20191130 203551 worker: Debug logging (off)
20191130 203551 worker: Device raw: Card0 (DAC) | Card1 () | I2Sdev (Audiophonics ES9028/9038 DAC)
20191130 203551 worker: Device cfg: Name (Audiophonics ES9028/9038 DAC) | Card (0) | MPDdev (0) | Mixer (Digital) | Alsavol: (0)
20191130 203551 worker: ALSA volume set to (0%)
20191130 203551 worker: -- System
20191130 203553 worker: Host name     (moode-unten)
20191130 203553 worker: moOde release (6.4.0 2019-11-24)
20191130 203553 worker: Raspbian OS   (10.2)
20191130 203553 worker: Linux kernel  (4.19.83-v8+ #1277)
20191130 203553 worker: Platform      (Pi-3B+ 1GB v1.3)
20191130 203553 worker: Architecture  (aarch64)
20191130 203553 worker: MPD version   (0.21.16)
20191130 203553 worker: CPU governor  (performance)
20191130 203554 worker: USB boot enabled
20191130 203554 worker: File system expanded
20191130 203554 worker: HDMI port off
20191130 203554 worker: File check (OK)
20191130 203554 worker: -- Network
20191130 203554 worker: eth0 exists
20191130 203554 worker: IP addr (192.168.178.30)
20191130 203555 worker: Netmask (255.255.255.0)
20191130 203555 worker: Gateway (192.168.178.1)
20191130 203555 worker: Pri DNS ()
20191130 203555 worker: Domain  ()
20191130 203555 worker: wlan0 does not exist
20191130 203555 worker: -- Audio
20191130 203555 worker: ALSA outputs unmuted
20191130 203555 worker: ALSA card number (0)
20191130 203555 worker: Audio output (I2S audio device)
20191130 203555 worker: Audio device (Audiophonics ES9028/9038 DAC)
20191130 203555 worker: Audio formats (S16_LE, S32_LE)
20191130 203555 worker: ALSA mixer name (Digital)
20191130 203555 worker: MPD volume control (hardware)
20191130 203555 worker: Hdwr volume controller exists
20191130 203555 worker: Max ALSA volume (100%)
20191130 203555 worker: -- Services
20191130 203555 worker: Reset renderer active state
20191130 203556 worker: MPD conf updated
20191130 203556 worker: MPD started
20191130 203557 worker: MPD accepting connections
20191130 203557 worker: Configure MPD outputs
20191130 203557 worker: MPD output 1 ALSA default (on)
20191130 203557 worker: MPD output 2 ALSA crossfeed (off)
20191130 203557 worker: MPD output 3 ALSA parametric eq (off)
20191130 203557 worker: MPD output 4 ALSA graphic eq (off)
20191130 203557 worker: MPD output 5 ALSA polarity inversion (off)
20191130 203557 worker: MPD output 6 ALSA bluetooth (off)
20191130 203557 worker: MPD output 7 HTTP stream (off)
20191130 203557 worker: MPD crossfade (off)
20191130 203557 worker: Audio source (Local)
20191130 203557 worker: Output device (Local)
20191130 203557 worker: USB auto-mounter (udisks-glue)
20191130 203557 worker: -- Music sources
20191130 203557 worker: USB sources (none attached)
20191130 203558 worker: NAS and UPnP sources (mountall initiated)
20191130 203558 worker: -- Miscellaneous
20191130 203558 worker: Saved MPD vol level (0)
20191130 203558 worker: Preamp volume level (0)
20191130 203558 worker: MPD volume level (54) restored
20191130 203558 worker: ALSA volume level (85%)
20191130 203558 worker: Auto-play (Off)
20191130 203558 worker: LocalUI started
20191130 203558 worker: Maintenance interval (6 hrs)
20191130 203558 worker: Screen saver activation (Never)
20191130 203558 worker: Session permissions (OK)
20191130 203558 worker: Watchdog started
20191130 203558 worker: Ready
20191130 203558 watchdog: INFO Audio output is (closed)
Reply


Messages In This Thread
Library build problem with my Audiophonics ES09038q2m RaspTouch - by maartin - 12-01-2019, 08:35 AM

Forum Jump: