The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 906 - File: showthread.php PHP 7.2.32 (Linux)
File Line Function
/showthread.php 906 errorHandler->error

Thank you for your donation!

Solved: DSD/DSF - Software Volume Control doesn't work

I am running a RPI 3B+ with a JustBoom DAC HAT + Moode 6.4.0.  I typically plug my headphones directly into the DAC HAT but I've noticed that the software controlled volume doesn't work when I play a DSD or DSF file.  It works fine for FLAC or mp3.  When a DSD or DSF song plays, it plays at FULL volume regardless of what the software volume is set to (i.e., 1 - 100).

Am I doing something wrong with the audio setup? Has anyone else experienced this on this DAC or any other DAC??  FYI, in my last setup, I used Volumio and was able to control the playback volume via software of DSD files.

Audio info:
Source: USB/Music/MUSIC/Roger Waters - Amused To Death (1992) [DSD64]/01 - The Ballad of Bill Hubbard.dsf
Encoded at: DSD64, 1 bit, 5.644 Mbps Stereo
Decoded to: PCM, 24 bit, 352.8 kHz, Stereo, 16.934 Mbps
Destination: Local
Output rate: 24 bit, 352.8 kHz, Stereo, 16.934 Mbps

Volume ctl: Software (MPD 32-bit float with dither)
Resampling: off
Polarity inv: off
Crossfade: off
Crossfeed: off
Parametric EQ: off
Graphic EQ: off
Replaygain: off
Normalize vol: off
Chip options: FIR interpolation with de-emphasis, Gain=0dB, Boost=0dB

Device: JustBoom DAC HAT(Zero)
Chip: Burr Brown PCM5122 (PCM5121)
Interface: I2S
Formats: S16_LE, S24_LE, S32_LE
Platform: Pi-3B+ 1GB v1.3

Thanks in advance,

Messages In This Thread
DSD/DSF - Software Volume Control doesn't work - by Gianni Ovalsand - 12-04-2019, 08:05 PM

Forum Jump: