03-30-2020, 12:55 PM
(This post was last modified: 04-01-2020, 04:12 PM by Ironfly.
Edit Reason: typo
)
hi all,
i have a MPD "crash" when trying to scan the Music folder on my OMV Nas.
MoodeAudio 6.4.2
Raspberry P3B+
hifiberry AMP2
folder is recognised and correctly mount, i can browse using SSH and also creating folders/files on it, permissions are OK but NAS doesn't appear on WEB UI folder list.
i checked various logs and i found that:
cat /var/log/moode.log
watchdog: MPD restarted (check syslog for errors)
nano syslog:
What's going wrong with it?
I don't think i have so many files to kill the scan.
cat /var/log/mpd/log
gives the scanned files and closes without scanning all the files (ending always at the same file) and giving no errors.
cat /var/log/moode.log
cat /var/log/moode.log
cat /var/log/moode.log
i have a MPD "crash" when trying to scan the Music folder on my OMV Nas.
MoodeAudio 6.4.2
Raspberry P3B+
hifiberry AMP2
folder is recognised and correctly mount, i can browse using SSH and also creating folders/files on it, permissions are OK but NAS doesn't appear on WEB UI folder list.
i checked various logs and i found that:
cat /var/log/moode.log
watchdog: MPD restarted (check syslog for errors)
Code:
20200330 140326 worker: -- Start
20200330 140326 worker: Successfully daemonized
20200330 140326 worker: Integrity check (passed)
20200330 140326 worker: Session loaded
20200330 140326 worker: Debug logging (off)
20200330 140326 worker: Device raw: (0:sndrpihifiberry|1:empty|i2s:HiFiBerry Amp2)
20200330 140326 worker: Device cfg: (HiFiBerry Amp2|0|0|Digital|0)
20200330 140327 worker: ALSA volume set to (0%)
20200330 140327 worker: -- System
20200330 140330 worker: Host name (moode)
20200330 140330 worker: moOde release (6.4.2 2020-02-12)
20200330 140330 worker: Raspbian OS (10.2)
20200330 140330 worker: Linux kernel (4.19.97-v8+ #1293)
20200330 140330 worker: Platform (Pi-3B+ 1GB v1.3)
20200330 140330 worker: Architecture (aarch64)
20200330 140330 worker: MPD version (0.21.16)
20200330 140330 worker: CPU governor (ondemand)
20200330 140330 worker: USB boot enabled
20200330 140330 worker: File system not expanded yet
20200330 140330 worker: HDMI port off
20200330 140331 worker: File check (OK)
20200330 140331 worker: -- Network
20200330 140331 worker: eth0 exists
20200330 140331 worker: IP addr (192.168.0.30)
20200330 140331 worker: Netmask (255.255.255.0)
20200330 140331 worker: Gateway (192.168.0.1)
20200330 140332 worker: Pri DNS (192.168.0.1)
20200330 140332 worker: Domain (None)
20200330 140332 worker: wlan0 does not exist
20200330 140332 worker: -- Audio
20200330 140332 worker: ALSA outputs unmuted
20200330 140332 worker: ALSA card number (0)
20200330 140332 worker: Audio output (I2S audio device)
20200330 140332 worker: Audio device (HiFiBerry Amp2)
20200330 140332 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20200330 140332 worker: ALSA mixer name (Digital)
20200330 140332 worker: MPD volume control (software)
20200330 140332 worker: Hdwr volume controller exists
20200330 140332 worker: Max ALSA volume (100%)
20200330 140332 worker: -- Services
20200330 140332 worker: Reset renderer active state
20200330 140333 worker: MPD conf updated
20200330 140333 worker: MPD started
20200330 140333 worker: MPD accepting connections
20200330 140333 worker: Configure MPD outputs
20200330 140334 worker: MPD output 1 ALSA default (on)
20200330 140334 worker: MPD output 2 ALSA crossfeed (off)
20200330 140334 worker: MPD output 3 ALSA parametric eq (off)
20200330 140334 worker: MPD output 4 ALSA graphic eq (off)
20200330 140334 worker: MPD output 5 ALSA polarity inversion (off)
20200330 140334 worker: MPD output 6 ALSA bluetooth (off)
20200330 140334 worker: MPD output 7 HTTP stream (off)
20200330 140334 worker: MPD crossfade (off)
20200330 140334 worker: Audio source (Local)
20200330 140334 worker: Output device (Local)
20200330 140334 worker: Bluetooth controller started
20200330 140334 worker: Bluetooth controller initialized
20200330 140334 worker: Bluetooth pairing agent started
20200330 140335 worker: LCD updater engine started
20200330 140335 worker: Shellinabox SSH started
20200330 140335 worker: USB auto-mounter (udisks-glue)
20200330 140335 worker: -- Music sources
20200330 140335 worker: USB sources (none attached)
20200330 140336 worker: NAS and UPnP sources (mountall initiated)
20200330 140336 worker: -- Miscellaneous
20200330 140336 worker: Saved MPD vol level (0)
20200330 140336 worker: Preamp volume level (0)
20200330 140336 worker: MPD volume level (20) restored
20200330 140336 worker: ALSA volume level (100%)
20200330 140336 worker: Auto-play (On)
20200330 140336 worker: ALSA output (closed)
20200330 140336 worker: Auto-playing id (1)
20200330 140336 worker: ALSA output (closed)
20200330 140336 worker: LocalUI started
20200330 140336 worker: Auto-shuffle service (Off)
20200330 140336 worker: Maintenance interval (3 hrs)
20200330 140336 worker: Screen saver activation (Never)
20200330 140336 worker: Session permissions (OK)
20200330 140336 worker: Watchdog started
20200330 140336 worker: Ready
20200330 141314 worker: Job rescanmpddb
20200330 141349 watchdog: MPD restarted (check syslog for errors)
20200330 141929 worker: Job updmpddb
20200330 141948 engine-mpd: Connection to MPD failed
20200330 141948 moode.php: MPD connect failed: cmd=(playlist)
20200330 141948 engine-mpd: Connection to MPD failed
20200330 141950 watchdog: MPD restarted (check syslog for errors)
20200330 142508 worker: Job rescanmpddb
20200330 142526 watchdog: MPD restarted (check syslog for errors)
20200330 142526 engine-mpd: Connection to MPD failed nano syslog:
Code:
Mar 30 14:13:49 moode systemd[1]: mpd.service: Main process exited, code=killed, status=7/BUS
Mar 30 14:13:49 moode systemd[1]: mpd.service: Failed with result 'signal'.What's going wrong with it?
I don't think i have so many files to kill the scan.
cat /var/log/mpd/log
gives the scanned files and closes without scanning all the files (ending always at the same file) and giving no errors.
cat /var/log/moode.log
cat /var/log/moode.log
cat /var/log/moode.log
