The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 906 - File: showthread.php PHP 7.2.34 (Linux)
File Line Function
/showthread.php 906 errorHandler->error



Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: Moode 6.5.2 and old RPI2
#1
Hi all to the forum members
Yesterday I tried to resume an old Raspberry PI2 stored in a drawer, trying to see if it could work with Moode (lockdown days can be long....).

I flash a microSD with the last version, install on the Raspy and try to access it. 
My first tentative was to access through wifi (I have a USB dongle for it), but no success at all. Then I tried using an ethernet cable plugged into a powerline adapter and I was able to access to Moode to configure it (btw, the moode.local way didn't work, so I had to scan my LAN to find the IP address used by the Raspy...) . No problem, I enter and configure all the stuff (region, NAS source, MPD options and servers etc. etc.).
I let I2SDevice set to "none" (I don't have a DAC to use for now), and set the MPD related option to "on board device". I enabled also HDMI because the idea was to pluc it into the front HDMI port on my AVR. Finally I set the Volume Control to "Disabled" in order to manage it from the AVR knob. 
Ok , it seems work.. but there are two things that are not working: 

1) Wi-Fi access: no way to work. Sometimes it connects, sometimes no (and I try very closed to the router...)
2) Whenever I try to play some content from Tidal, the tedious "MPD fail to decode" message appear. Obviously I check the TIDAL credentials and all are OK.
   The whole messages says  : "MPD Error ; Failed to decode http://myip:49149/tidal/track?version=1&trackId_34454466; CURL failed; Empty reply from the server ". How can I solve it ? 

thanks!
Andrea


Attached Files Thumbnail(s)
   
Reply


Messages In This Thread
Moode 6.5.2 and old RPI2 - by mancio61 - 05-13-2020, 03:51 PM
RE: Moode 6.5.2 and old RPI2 - by TheOldPresbyope - 05-13-2020, 05:07 PM
RE: Moode 6.5.2 and old RPI2 - by jonners - 05-13-2020, 05:33 PM
RE: Moode 6.5.2 and old RPI2 - by mancio61 - 05-13-2020, 05:41 PM
RE: Moode 6.5.2 and old RPI2 - by vinnn - 05-13-2020, 06:10 PM
RE: Moode 6.5.2 and old RPI2 - by jonners - 05-13-2020, 06:22 PM
RE: Moode 6.5.2 and old RPI2 - by vinnn - 05-13-2020, 06:33 PM
RE: Moode 6.5.2 and old RPI2 - by jonners - 05-13-2020, 07:25 PM
RE: Moode 6.5.2 and old RPI2 - by TheOldPresbyope - 05-13-2020, 06:31 PM
RE: Moode 6.5.2 and old RPI2 - by vinnn - 05-13-2020, 06:41 PM
RE: Moode 6.5.2 and old RPI2 - by mancio61 - 05-18-2020, 09:50 AM
RE: Moode 6.5.2 and old RPI2 - by mancio61 - 05-18-2020, 12:20 PM
RE: Moode 6.5.2 and old RPI2 - by vinnn - 05-18-2020, 01:43 PM

Forum Jump: