Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Upcoming moOde 6.4.0 update
#51
(11-27-2019, 10:57 PM)Malefoda Wrote: Hi Tim, Team, guys,

in-place update here, seems ok to me:

Code:
Kernel 4.19.75-v7+, Raspbian 10.1, moOde 6.3.0
                         ____     __  
             __ _  ___  / __ \___/ /__
            /  ' \/ _ \/ /_/ / _  / -_)
           /_/_/_/\___/\____/\_,_/\__/
                                         
                moOde audio player
               (C) 2014 Tim Curtis


The programs included with Moode are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright.
Moode comes with absolutely no warranties expressed or
implied, or any other guarantees.

Last login: Fri Oct 11 18:36:15 2019 from 192.168.34.11
pi@moodepi3:~ $ moodeutl -l
20191111 191856 worker: -- Start
20191111 191857 worker: Successfully daemonized
20191111 191857 worker: Integrity check (passed)
20191111 191857 worker: Session loaded
20191111 191857 worker: Debug logging (off)
20191111 191857 worker: ALSA volume set to (0%)
20191111 191858 worker: -- System
20191111 191900 worker: Host name     (moodepi3)
20191111 191900 worker: moOde release (6.3.0 2019-10-02)
20191111 191900 worker: Raspbian OS   (10.1)
20191111 191900 worker: Linux kernel  (4.19.75-v7+ #1270)
20191111 191900 worker: Platform      (Pi-3B 1GB v1.2)
20191111 191900 worker: Architecture  (armv7l)
20191111 191900 worker: MPD version   (0.20.23)
20191111 191900 worker: CPU governor  (performance)
20191111 191900 worker: USB boot not enabled yet
20191111 191900 worker: File system expanded
20191111 191900 worker: HDMI port off
20191111 191901 worker: File check (OK)
20191111 191901 worker: -- Network
20191111 191901 worker: eth0 exists
20191111 191901 worker: eth0 (192.168.34.13)
20191111 191901 worker: wlan0 exists
20191111 191901 worker: wifi country (FR)
20191111 191901 worker: wlan0 SSID is blank
20191111 191901 worker: eth0 addr exists, AP mode not started
20191111 191901 worker: wlan0 address not assigned
20191111 191901 worker: -- Audio
20191111 191901 worker: ALSA outputs unmuted
20191111 191901 worker: ALSA card number (0)
20191111 191901 worker: Audio output (I2S audio device)
20191111 191901 worker: Audio device (HiFiBerry DAC+)
20191111 191902 worker: Supported audio formats (S16_LE, S24_LE, S32_LE)
20191111 191902 worker: ALSA mixer name (Digital)
20191111 191902 worker: MPD volume control (software)
20191111 191902 worker: Hdwr volume controller exists
20191111 191902 worker: -- Services
20191111 191902 worker: Reset renderer active state
20191111 191902 worker: MPD conf updated
20191111 191902 worker: MPD started
20191111 191903 worker: MPD accepting connections
20191111 191903 worker: Configure MPD outputs
20191111 191903 worker: MPD output 1 ALSA default (on)
20191111 191903 worker: MPD output 2 ALSA crossfeed (off)
20191111 191903 worker: MPD output 3 ALSA parametric eq (off)
20191111 191903 worker: MPD output 4 ALSA graphic eq (off)
20191111 191903 worker: MPD output 5 ALSA polarity inversion (off)
20191111 191903 worker: MPD output 6 ALSA bluetooth (off)
20191111 191903 worker: MPD output 7 HTTP stream (off)
20191111 191903 worker: MPD crossfade (off)
20191111 191903 worker: Audio source (Local)
20191111 191903 worker: Output device (Local)
20191111 191903 worker: USB auto-mounter (udisks-glue)
20191111 191903 worker: -- Music sources
20191111 191903 worker: USB sources (none attached)
20191111 191904 worker: NAS and UPnP sources (mountall initiated)
20191111 191904 worker: -- Miscellaneous
20191111 191904 worker: Saved MPD vol level (0)
20191111 191904 worker: Preamp volume level (0)
20191111 191904 worker: MPD volume level (50) restored
20191111 191904 worker: ALSA volume level (100%)
20191111 191904 worker: Auto-play (Off)
20191111 191904 worker: Maintenance interval (6 hrs)
20191111 191904 worker: Screen saver activation (Never)
20191111 191904 worker: Session permissions (OK)
20191111 191904 worker: Watchdog started
20191111 191904 worker: Ready
pi@moodepi3:~ $ moodeutl -t
worker: MPD output 5 ALSA polarity inversion (off)
20191111 191903 worker: MPD output 6 ALSA bluetooth (off)
20191111 191903 worker: MPD output 7 HTTP stream (off)
20191111 191903 worker: MPD crossfade (off)
20191111 191903 worker: Audio source (Local)
20191111 191903 worker: Output device (Local)
20191111 191903 worker: USB auto-mounter (udisks-glue)
20191111 191903 worker: -- Music sources
20191111 191903 worker: USB sources (none attached)
20191111 191904 worker: NAS and UPnP sources (mountall initiated)
20191111 191904 worker: -- Miscellaneous
20191111 191904 worker: Saved MPD vol level (0)
20191111 191904 worker: Preamp volume level (0)
20191111 191904 worker: MPD volume level (50) restored
20191111 191904 worker: ALSA volume level (100%)
20191111 191904 worker: Auto-play (Off)
20191111 191904 worker: Maintenance interval (6 hrs)
20191111 191904 worker: Screen saver activation (Never)
20191111 191904 worker: Session permissions (OK)
20191111 191904 worker: Watchdog started
20191111 191904 worker: Ready
20191127 223132 worker: Job installupd
20191127 223132 updater: Downloading update package r630
20191127 223140 updater: Start 2019-11-24 update for moOde 6.3.0
20191127 223140 updater: ** Version check
20191127 223140 updater: ** Step 1-9: Update SQL tables
20191127 223141 updater: ** Step 2-9: Update radio stations
20191127 223141 updater: ** Step 3-9: Install packages
20191127 223141 updater: **  pkg 1-3: Update and upgrade
20191127 224223 updater: **  pkg 2-3: Install xfsprogs
20191127 224251 updater: **  pkg 3-3: Install libmosquitto-dev
20191127 224300 updater: ** Step 4-9: Install binaries and scripts
20191127 224300 updater: **  bin 1-4: Install MPD 0.21.16
20191127 224300 updater: **  bin 2-4: Install shairport-sync 3.3.5 w/mqtt
20191127 224300 updater: **  bin 3-4: Install rx 0.4
20191127 224300 updater: **  bin 4-4: Install tx 0.4
20191127 224300 updater: **  scr 1-2: Install alsa-capabilities 2.0.1
20191127 224300 updater: **  scr 2-2: Install moodeutl 1.3.1
20191127 224300 updater: ** Step 5-9: Update bluez-alsa to version 2.0.0
20191127 224439 updater: ** Step 6-9: Update moOde sources and configs
20191127 224455 updater: ** Step 7-9: Install Linux kernel 4.19.83 build 1277
20191127 225018 updater: ** Step 8-9: Install drivers for Allo USBridge Signature
20191127 225019 updater: ** Step 9-9: Sync changes to disk
20191127 225023 updater: Update installed, REBOOT required
20191127 233713 worker: Job reboot
Kernel 4.19.83-v7+, Raspbian 10.2, moOde 6.4.0
                         ____     __  
             __ _  ___  / __ \___/ /__
            /  ' \/ _ \/ /_/ / _  / -_)
           /_/_/_/\___/\____/\_,_/\__/
                                         
                moOde audio player
               (C) 2014 Tim Curtis


The programs included with Moode are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright.
Moode comes with absolutely no warranties expressed or
implied, or any other guarantees.

Last login: Wed Nov 27 22:30:14 2019 from 192.168.34.11
pi@moodepi3:~ $ moodeutl -t
1127 233745 worker: MPD output 6 ALSA bluetooth (off)
20191127 233745 worker: MPD output 7 HTTP stream (off)
20191127 233745 worker: MPD crossfade (off)
20191127 233745 worker: Audio source (Local)
20191127 233745 worker: Output device (Local)
20191127 233745 worker: USB auto-mounter (udisks-glue)
20191127 233745 worker: -- Music sources
20191127 233745 worker: USB sources (none attached)
20191127 233746 worker: NAS and UPnP sources (mountall initiated)
20191127 233746 worker: -- Miscellaneous
20191127 233746 worker: Saved MPD vol level (0)
20191127 233746 worker: Preamp volume level (0)
20191127 233746 worker: MPD volume level (50) restored
20191127 233746 worker: ALSA volume level (100%)
20191127 233746 worker: Auto-play (Off)
20191127 233746 worker: Maintenance interval (6 hrs)
20191127 233746 worker: Screen saver activation (Never)
20191127 233746 worker: Session permissions (OK)
20191127 233746 worker: Watchdog started
20191127 233746 worker: Ready
20191127 233746 watchdog: INFO Audio output is (closed)


But, again, got the pop up when restarted and now I can't see my Mac shared folder (and its songs vanished from playlist) even if I see it as mounted in "Library" panel. (Remount does nothing). IIRC there is a string with SMB mounting tags, nothing to check there?



Beside Radios my moOde is dead silent :'(
Have mercy! Wink
Matthieu

Same for me...
But i hit "update mpd database" and shared folder appeared again
Reply
#52
Seamless update for me, took 11 minutes on the Pi 3.
Well done.
Reply
#53
(11-27-2019, 11:10 PM)grasshopper Wrote: @Malefoda I just updated two players, all is ok now, but after the reboot I spotted the mpd error both times. I went straight to the library options and chose to sort them by year, an update I've been looking forward to. My playlist and list of queued music vanished, as did the library.  I just updated the mpd library and deleted the library tag cache, both players now see all music and sorted by year :-) I didn't touch mount options, I suspected this was caused by the change of mpd versions?
Sounds great btw.

(11-28-2019, 06:27 AM)sszpila Wrote: Same for me...
But i hit "update mpd database" and shared folder appeared again

Thanks guys! Fixed now =)
Reply
#54
(11-27-2019, 11:10 PM)grasshopper Wrote: @Malefoda I just updated two players, all is ok now, but after the reboot I spotted the mpd error both times. I went straight to the library options and chose to sort them by year, an update I've been looking forward to. My playlist and list of queued music vanished, as did the library.  I just updated the mpd library and deleted the library tag cache, both players now see all music and sorted by year :-) I didn't touch mount options, I suspected this was caused by the change of mpd versions?
Sounds great btw.

SQ improved!
Reply
#55
Thumbs Up 
Hi Tim,
made the update via the "in-place update" and everything went OK to me (just had to re-edit the /etc/rc.local file).
On a Rasptouch + 7inch screen and ir control (via irexec).

Just a remark for a future update. Idea  The new classification by year is a good choice but I usually prefer to have a classification by Artist first then By Year.  Big Grin
So It would be nice to add a fourth choice with "Artist/year" for coverview   Smile

Have a nice day
Rasptouch case with RPI3 + I2C 16x2 screen and IR port
Audiophonics I-Sabre V2.1 DAC ES9023 TCXO
Reply
#56
Hi,

"Artist/year" added to the TODO list :-)
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#57
Nice :-) Thanks for confirming the Katana/4B work around.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#58
Update went smoother than siliconised silk   Smile 

Donation sent....
----------
bob
Reply
#59
Hi Tim,

Thank you for v6.4.0. Just installed it on a new SD card.
Should the OTA Update also work from v6.3.1 ? I didn't get it offered.

Best Regards
Josef
Reply
#60
I'll have to investigate "Update not offered for 6.3.1"
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply


Forum Jump: