Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Odd message in System Information, no audio after update
#1
I just did a double update (from 5.1, to 5.2 and then to 5.3) and I found a couple of odd lines in the System Information.

They seem to be out of place commands... sounding like results of a command not finding a file.

They show up between Core Services and Appearance Settings in the SI log. Was going to snip just the lines,  but...

I just checked the playback,  and it's broken.  Seems its not getting a card at the expected address.  It had been working fine earlier with the Allo Boss card I've been using on this one.  It's still selected in the Audio menus,  as well as showing up as configured for it in the SI log.
Quote: S Y S T E M    P A R A M E T E R S  

Date and time = 2019-06-10 02:05:16
System uptime = up 52 minutes
Timezone = America/Los_Angeles
Release = moOde 5.3 2019-05-30
Update = None

Host name = moode
ETH0  IP = unassigned
ETH0  MAC = b8:27:eb:c0:71:2e
WLAN0 IP = 192.168.1.107
WLAN0 MAC = b8:27:eb:95:24:7b
WiFi country = US

HDWR REV = Pi-3B+ 1GB v1.3
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.6
KERNEL = 4.19.46-v7+
KTIMER FREQ = 100 Hz
USB BOOT = enabled
Warranty = OK

ROOT size = 2.9G
ROOT used = 73%
ROOT avail = 772M
FS expand = not expanded
MEM free = 627 MB
MEM used = 70 MB
Temperature = 51.5°C

CPU GOV = ondemand
P3-WIFI = On
P3-BT = Off
HDMI = On
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = Off
ETHPORT FIX = Off
SSH server = Off

LED0 = on
LED1 = on
SD CARD = 50 MHz

 C O R E    S E R V I C E S  

PHP-FPM = 7.0.30
NGINX = 1.10.3
SQLite = 3.16.2
HOSTAPD = 2.7
WIRINGPI = 2.50

cat: /proc/asound/card0/pcm0p/sub0/hw_params: No such file or directory
cat: /proc/asound/card0/pcm0p/sub0/hw_params: No such file or directory
 A P P E A R A N C E   S E T T I N G S  

Theme = Default
Accent color = Alizarin
Alpha blend = 1.0
Adaptive background = No
Background image = No
Cover backdrop = No
Cover blur = 20px
Cover scale = 1.25
CoverView auto-display = Never
CoverView style = Animated
Auto-shuffle filter = None
Extra metadata = Yes
Playback history = No

 L I B R A R Y   S E T T I N G S  

Artist list order = Artist
Ignore articles = a,an,the
Compilation rollup = No
Compilation excludes = greatest hits
UTF8 character filter = No
Cover search pri = Embedded cover
Hi-res covers = Auto
Pixel ratio = 1

 A U D I O    P A R A M E T E R S  

Audio device = Allo Boss DAC
Interface = I2S
Hardware volume = Controller detected
Mixer name = Digital
Audio source = Local
Output device = Local
Resume MPD aft src chg = No
Volume knob = 0
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.1.3-5+rpi3
SoX version = 0.1.2-2

Bluetooth controller = Off
Bluetooth pairing agent = Off
Airplay receiver = Off
Spotify receiver = On
Squeezelite = Off
UPnP client = Off
DLNA server = Off
GPIO button handler = Off

Rotary encoder = Off
Encoder params = 100 2 3 4 5
Crossfeed = Off
Parametric EQ = Off
Graphic EQ = Off
Polarity inversion = Off
Auto-shuffle = Off
Autoplay = Off
MPD crossfade = Off
MPD httpd = Off

 M P D    S E T T I N G S  

Version = 0.20.23
Volume control = software
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = on
DSD over PCM (DoP) = no
Replaygain = off
Replaygain preamp = 0
Volume normalization = No
Audio buffer (kb) = 4096
Output buffer size (kb) = 131072

 B L U E T O O T H    S E T T I N G S  

Bluetooth ver = 5.50
Bluealsa ver = 1.3.1
Speaker sharing = No
Resume MPD = No

 A I R P L A Y    S E T T I N G S  

Version = 3.3
Friendly name = Moode Airplay
ALSA device = hw:0
Interpolation = soxr
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout (ms) = 120
Audio buffer (secs) = 0.0
Resume MPD = No

 S P O T I F Y    S E T T I N G S  

Friendly name = Moode Spotify
ALSA device = plughw:0
Bit rate = 320
Initial volume = 20
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0
Resume MPD = No

 S Q U E E Z E L I T E    S E T T I N G S  

Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E -S /var/loca
Resume MPD = No

 M O O D E    L O G  

   20190610 011310 worker: - Start
   20190610 011310 worker: Successfully daemonized
   20190610 011310 worker: Integrity check (passed)
   20190610 011310 worker: ALSA volume set to (Invalid card number.)
   20190610 011311 worker: Session loaded
   20190610 011311 worker: Debug logging (off)
   20190610 011311 worker: - Platform
   20190610 011313 worker: Rel  (Moode 5.3 2019-05-30)
   20190610 011313 worker: Upd  (None)
   20190610 011313 worker: Rasp (9.6)
   20190610 011313 worker: Kern (4.19.46-v7+)
   20190610 011313 worker: MPD  (0.20.23)
   20190610 011313 worker: Host (moode)
   20190610 011313 worker: Hdwr (Pi-3B+ 1GB v1.3)
   20190610 011313 worker: Arch (armv7l)
   20190610 011313 worker: Gov  (ondemand)
   20190610 011313 worker: USB boot enabled
   20190610 011313 worker: File system not expanded yet
   20190610 011313 worker: HDMI port on
   20190610 011313 worker: File check ok
   20190610 011313 worker: - Network
   20190610 011313 worker: eth0 exists
   20190610 011314 worker: eth0 wait 0 for IP address
   20190610 011317 worker: eth0 wait 1 for IP address
   20190610 011320 worker: eth0 wait 2 for IP address
   20190610 011323 worker: eth0 wait 3 for IP address
   20190610 011326 worker: eth0 wait 4 for IP address
   20190610 011338 worker: eth0 wait 5 for IP address
   20190610 011340 command/moode: Connection to MPD failed
   20190610 011341 worker: eth0 wait 6 for IP address
   20190610 011343 command/moode: Connection to MPD failed
   20190610 011344 worker: eth0 wait 7 for IP address
   20190610 011347 worker: eth0 wait 8 for IP address
   20190610 011350 worker: eth0 wait 9 for IP address
   20190610 011352 command/moode: Connection to MPD failed
   20190610 011353 worker: eth0 address not assigned
   20190610 011353 worker: wlan0 exists
   20190610 011353 worker: wifi country (US)
   20190610 011353 worker: wlan0 trying SSID (network_5G)
   20190610 011353 worker: wlan0 (192.168.1.107)
   20190610 011353 worker: - Audio
   20190610 011353 worker: ALSA outputs unmuted
   20190610 011353 worker: ALSA card number (0)
   20190610 011353 worker: Audio output (I2S audio device)
   20190610 011353 worker: Audio device (Allo Boss DAC)
   20190610 011353 worker: ALSA mixer name (Digital)
   20190610 011353 worker: MPD volume control (software)
   20190610 011354 worker: Hdwr volume controller exists
   20190610 011354 worker: Chip options (Burr Brown PCM5122)
   20190610 011354 worker: - Services
   20190610 011354 worker: Reset renderer active state
   20190610 011354 worker: MPD conf updated
   20190610 011354 worker: MPD started
   20190610 011355 command/moode: Connection to MPD failed
   20190610 011355 worker: MPD accepting connections
   20190610 011355 worker: Configure MPD outputs
   20190610 011355 worker: MPD output 1 ALSA default (on)
   20190610 011355 worker: MPD output 2 ALSA crossfeed (off)
   20190610 011355 worker: MPD output 3 ALSA parametric eq (off)
   20190610 011355 worker: MPD output 4 ALSA graphic eq (off)
   20190610 011355 worker: MPD output 5 ALSA polarity inversion (off)
   20190610 011355 worker: MPD output 6 ALSA bluetooth (off)
   20190610 011355 worker: MPD output 7 HTTP stream (off)
   20190610 011355 worker: MPD crossfade (off)
   20190610 011355 worker: Audio source (Local)
   20190610 011355 worker: Output device (Local)
   20190610 011355 worker: Spotify receiver started
   20190610 011355 worker: - Music sources
   20190610 011355 worker: USB source (Lexar)
   20190610 011355 worker: NAS sources (none configured)
   20190610 011355 worker: - Miscellaneous
   20190610 011355 worker: Saved MPD vol level (0)
   20190610 011355 worker: Preamp volume level (0)
   20190610 011355 worker: MPD volume level (30) restored
   20190610 011355 worker: ALSA volume level (Invalid card number.)
   20190610 011355 worker: Auto-play is off
   20190610 011355 worker: Maintenance interval (21600)
   20190610 011355 worker: Screen saver activation (Never)
   20190610 011355 worker: Watchdog started
   20190610 011355 worker: Ready
   20190610 020332 worker: Job alsavolume
   20190610 020357 worker: Job mpdcfg
Reply
#2
(06-10-2019, 09:13 AM)JonPike Wrote: I just did a double update (from 5.1, to 5.2 and then to 5.3) and I found a couple of odd lines in the System Information.

They seem to be out of place commands... sounding like results of a command not finding a file.

They show up between Core Services and Appearance Settings in the SI log. Was going to snip just the lines,  but...

I just checked the playback,  and it's broken.  Seems its not getting a card at the expected address.  It had been working fine earlier with the Allo Boss card I've been using on this one.  It's still selected in the Audio menus,  as well as showing up as configured for it in the SI log.

And, I get the following error code upon trying to play stations, sounds about right for the problem as a misconfigured card.
What do you think?   Let me know if you want some other logs or such...



Quote:MPD error

Failed to open "ALSA default" [alsa]; Failed to open ALSA device "hw:0,0": No such file or directory
Reply
#3
Did you reboot at least once after the update process was complete?
Reply
#4
(06-10-2019, 12:10 PM)TheOldPresbyope Wrote: Did you reboot at least once after the update process was complete?

I believe I did.  I may have not rebooted between 5.1 and 5.2,  but pretty sure I did.  

This would be the first time I've updated a couple in a row like that.  Have done some single ver updates a few times.  More often I just flash a new full release.  Do you guys want me to try that?   I might still have a 5.1 to try to duplicate if you need to.

Edit:  Another data point,  reflashed with the 5.3 iso, and as expected it finds (after selection) my Allo Boss w no problem, and music is flowing...
Reply
#5
If u still have a 5.1 build then try updating to 5.2, reboot and then update to 5.3.

Otherwise I'd just start with a fresh 5.3 image :-)
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#6
(06-10-2019, 06:50 PM)Tim Curtis Wrote: If u still have a 5.1 build then try updating to 5.2, reboot and then update to 5.3.

Otherwise I'd just start with a fresh 5.3 image :-)

Oddly,  I have 5.0 and 5.2 in my downloaded Moode directory...  really wondering how I started out w 5.1 on that player..  Must have gone 5.0 - 5.1,  then to 5.2 and 5.3?  

At least my straight to 5.3 from iso got the job done. I even dont think Im seeing the multi wifi issue.

Guess if this really is a problem, its only going to affect the multi updaters.
Reply
#7
Glad to hear its working.

There was no 5.1 image, just a 5.0 image + 5.0 -> 5.1 update.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply


Forum Jump: