Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


linear power...stunned!
#11
+2 for recognizing the transformer for what it is and not just thinking "huh, a toy train accessory"!
Reply
#12
Nice build Drone7, you are feeding an USB dac, right? May I ask if the rest of your system is revealing or high-end?
I'll try mine on a digital set (Allo Digione) so maybe nothing audible...
Reply
#13
Yes a USB dac.... the stock unit integral with the Perreaux Audiant 80i  which is why I was so surprised at the improvements.
Once I have the second unit built I will use that to power the Kali/Piano combo and test.

Rest of system downstream using either Plinius or aforementioned Perreaux and  homebuilt 2way bookshelf speakers or Shahinian Arcs and a highly modified Monitor Audio Silver W12 sub
----------
bob
Reply
#14
(08-24-2019, 06:56 PM)DRONE7 Wrote: Hi Richard,
I ordered boards from the group buy over at DIY-audio
https://www.diyaudio.com/forums/group-bu...board.html
I think another gb is about to start....

Hi Bob, i read with interest your thread, what type of kit did you bought for RP?
Differences about minikit and full kit?
Thanks, cheers..
Marco
Reply
#15
Hi Marco, I bought boards only and sourced the parts from Mouser using the BOM from Salas.
Not certain but I think the mini-kit has board and some components that are easily posted...you have to source the rest...heatsinks etc.
Full kit may have all components ? but check the details at the DIYAudio site...
https://www.diyaudio.com/forums/power-su...apter.html
https://www.diyaudio.com/forums/group-bu...board.html
https://docs.google.com/spreadsheets/d/1...edit#gid=0
----------
bob
Reply
#16
(04-03-2020, 05:24 PM)DRONE7 Wrote: Hi Marco, I bought boards only and sourced the parts from Mouser using the BOM from Salas.
Not certain but I think the mini-kit has board and some components that are easily posted...you have to source the rest...heatsinks etc.
Full kit may have all components ?  but check the details at the DIYAudio site...
https://www.diyaudio.com/forums/power-su...apter.html
https://www.diyaudio.com/forums/group-bu...board.html
https://docs.google.com/spreadsheets/d/1...edit#gid=0

Many thanks Bob  Wink

Marco
Reply
#17
I want to add my 2 cents to this discussion. I am using the Allo Shanti Dual LPS to power my RPI3b+ and the Katana DAC board. My Katana stack is modified so I have no USB power inputs are being used . This improves the SQ, trust me. I have a DIY 5 volt Linear Technologies LT3042 with a Toroidal Transformer powering the Micro Controller board. For the SQ output board, heavily modified, I use a Acopian +/-15 Volt Military LPS.
Reply
#18
Would the juice be worth the squeeze for a Pi3 with a HiFiBerry Dac+?
Reply
#19
(05-14-2020, 05:29 PM)LaserGecko Wrote: Would the juice be worth the squeeze for a Pi3 with a HiFiBerry Dac+?

Which PSU are you refering to, the one described by the OP (@DRONE7) or the one 'dropped in' by @Lizard_King...?
Reply
#20
(05-15-2020, 05:34 AM)CallMeMike Wrote:
(05-14-2020, 05:29 PM)LaserGecko Wrote: Would the juice be worth the squeeze for a Pi3 with a HiFiBerry Dac+?

Which PSU are you refering to, the one described by the OP (@DRONE7) or the one 'dropped in' by @Lizard_King...?

https://www.diyaudio.com/forums/power-su...apter.html

This one. 

I went ahead and ordered a full kit and a spare board. Smile
Reply


Forum Jump: