10-04-2019, 05:42 PM
(10-04-2019, 06:30 AM)adrii Wrote: Hi Juan Manuel
It looks like you are running wget in the root directory, '/', where you don't have write permission. Try changing to your home directory (run 'cd') and then run the commands there.
Adrian.
You are right!! it was a problem of the directory
The results of ./alsa-capabilities are:
pi@moode3C:~ $ ./alsa-capabilities
1) Analog output interface hw:0,0 (or hw:ALSA,0)
- card name = ALSA
- card label = bcm2835 ALSA
- interface name = bcm2835 ALSA
- usb audio class = (n/a)
- character device = /dev/snd/pcmC0D0p
- encoding formats = U8, S16_LE
- monitor file = /proc/asound/card0/pcm0p/sub0/hw_params
- stream file = (n/a)
2) Digital output interface hw:0,1 (or hw:ALSA,1)
- card name = ALSA
- card label = bcm2835 ALSA
- interface name = bcm2835 IEC958/HDMI
- usb audio class = (n/a)
- character device = /dev/snd/pcmC0D1p
- encoding formats = S16_LE
- monitor file = /proc/asound/card0/pcm1p/sub0/hw_params
- stream file = (n/a)
3) Digital output interface hw:0,2 (or hw:ALSA,2)
- card name = ALSA
- card label = bcm2835 ALSA
- interface name = bcm2835 IEC958/HDMI1
- usb audio class = (n/a)
- character device = /dev/snd/pcmC0D2p
- encoding formats = S16_LE
- monitor file = /proc/asound/card0/pcm2p/sub0/hw_params
- stream file = (n/a)
4) Digital USB Audio Class output interface hw:1,0 (or hw:C20,0)
- card name = C20
- card label = Cambridge Audio USB Audio 2.0
- interface name = USB Audio
- usb audio class = 2 - isochronous asynchronous
- character device = /dev/snd/pcmC1D0p
- encoding formats = S32_LE
- monitor file = /proc/asound/card1/pcm0p/sub0/hw_params
- stream file = /proc/asound/card1/stream0
Any idea about the cause of the problem?
Thanks
Best regards
Juan Manuel