Thank you for your donation!


Problem: WiFi (AP) and CAT-5 together
#14
Thanks, Tim.

Setting that OFF doesn't make much difference. There's still an extra minute+ of time before the WiFi is enabled.

With my RPI3 it's 30sec from boot to ready via wired.
It's 90sec from boot to ready via wireless with Wait for eth0 OFF, and it's 135sec from boot to read via wireless with Wait for eth0 ON.

Is that a limitation of the RPI's wireless system or is there another delay in the MoOde software?
Reply


Messages In This Thread
WiFi (AP) and CAT-5 together - by Meestor_X - 09-18-2019, 06:52 PM
RE: WiFi (AP) and CAT-5 together - by Tim Curtis - 09-18-2019, 07:42 PM
RE: WiFi (AP) and CAT-5 together - by Meestor_X - 09-18-2019, 08:19 PM
RE: WiFi (AP) and CAT-5 together - by Tim Curtis - 09-18-2019, 09:16 PM
RE: WiFi (AP) and CAT-5 together - by Meestor_X - 09-18-2019, 10:06 PM
RE: WiFi (AP) and CAT-5 together - by aknaggbaugh - 09-19-2019, 09:40 AM
RE: WiFi (AP) and CAT-5 together - by Meestor_X - 09-19-2019, 10:32 PM
RE: WiFi (AP) and CAT-5 together - by Meestor_X - 09-20-2019, 02:39 PM
RE: WiFi (AP) and CAT-5 together - by Tim Curtis - 09-20-2019, 03:08 PM
RE: WiFi (AP) and CAT-5 together - by Meestor_X - 09-20-2019, 05:20 PM
RE: WiFi (AP) and CAT-5 together - by Meestor_X - 09-21-2019, 03:22 PM
RE: WiFi (AP) and CAT-5 together - by Tim Curtis - 09-21-2019, 03:35 PM
RE: WiFi (AP) and CAT-5 together - by Meestor_X - 09-27-2019, 04:09 PM
RE: WiFi (AP) and CAT-5 together - by Tim Curtis - 09-27-2019, 04:22 PM
RE: WiFi (AP) and CAT-5 together - by Meestor_X - 10-09-2019, 08:39 PM
RE: WiFi (AP) and CAT-5 together - by Tim Curtis - 10-09-2019, 10:09 PM

Forum Jump: