Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: Moode 6.3.0 Access Point issue
#1
Hello,

I'm currently trying to run 6.30.  This one sounds very nice.
Unfortunately i'm currently stuck on not being able to get the access point working.  It was not working from the get go.  I've changed the channel from 6 to 1, still a no go.

I am unable to connect to or find SSID "Moode" / "moode" etc.  I've changed the region to "Australia" in the wireless settings and for the timezone.

Its a fresh install (iso MD5 checked).  If anyone can help, it would be much appreciated.

Scanning for wifi networks works.

To make sure that i have not experienced a hardware issue, i've loaded an older version of Moode and the AP is working (for the older version).

Thanks



Code:
S Y S T E M   P A R A M E T E R S

moOde release = 6.3.0 2019-10-02
Raspbian OS = 10.1
Linux kernel = 4.19.75-v7+ #1270
Platform = Pi-3B 1GB v1.2
Architecture = armv7l (32-bit)
System uptime = up 8 minutes
Timezone = Australia/Perth
Current time = 2019-11-07 02:19:21

Host name = moode
Ethernet address = 192.168.0.200
Ethernet MAC = b8:27:eb:1d:08:3b
WLAN address = unassigned
WLAN MAC = b8:27:eb:48:5d:6e
WLAN country = AU

SoC identifier = bcm2837
Core count = 4
Kernel timer freq = 100 Hz
SDCard freq = 50 MHz
USB boot = not enabled
Warranty = OK

Root size = 15G
Root used = 19%
Root available = 12G
Root expand = expanded
Memory free = 614 MB
Memory used = 93 MB
SoC temperature = 52.6°C

CPU governor = performance
Onboard WiFi = On
Onboard BT = Off
HDMI output = Off
Eth addr wait = Off
Max USB current = Off
USB (UAC2) fix = Off
Pi-3B+ eth fix = Off
SSH term server = Off

PHP-FPM version = 7.3.9
NGINX version = 1.14.2
SQLite3 version = 3.27.2
Hostapd version = 2.8-devel
WiringPi version = 2.50
RPi.GPIO version = 0.7.0

A U D I O   P A R A M E T E R S

Audio device = USB audio device
Interface = USB
Hardware volume = Controller detected
Mixer name = PCM
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 89
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.1.8-1+rpt1
SoX version = 0.1.2-3

Bluetooth controller = Off
Pairing agent = Off
Airplay receiver = Off
Spotify receiver = Off
Squeezelite = Off
UPnP client = On
DLNA server = Off
GPIO button handler = Off
UPnP browser = Off

Auto-shuffle = Off
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Off
MPD httpd = Off

A P P E A R A N C E   S E T T I N G S

Theme = Pure Black
Accent color = Emerald
Alpha blend = 1.0
Adaptive background = No
Background image = No
Cover backdrop = No
Cover blur = 20px
Cover scale = 1.25
CoverView auto-display = Never
CoverView style = Animated
Auto-shuffle filter = None
Extra metadata = Yes
Playback history = No

L I B R A R Y   S E T T I N G S

Instant play action = Clear/Play
Show genres column = Yes
Album grouping = by Artist
Compilation identifier = Various Artists
Recently added = 1 Month
Ignore articles = a,an,the
UTF8 character filter = No
Hi-res thumbs = Auto
Cover search pri = Embedded cover
Pixel ratio = 1

M P D   S E T T I N G S

Version = 0.20.23
Volume control = software
ALSA device = hw:1
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
DSD over PCM (DoP) = no
Replaygain = off
Replaygain preamp = 0
Volume normalization = No
Audio buffer = 4096 (kb)
Output buffer size = 131072 (kb)

B L U E T O O T H   S E T T I N G S

Bluetooth ver = 5.50
Bluealsa ver = 1.3.1
Speaker sharing = No
Resume MPD = No
PCM buffer time = 500000 (\u03BCs)

A I R P L A Y   S E T T I N G S

Version = 3.3.2
Friendly name = Moode Airplay
ALSA device = hw:1
Interpolation = soxr
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout = 120 (ms)
Audio buffer = 0.0 (secs)
Resume MPD = No

S P O T I F Y   S E T T I N G S

Friendly name = Moode Spotify
ALSA device = plughw:1
Bit rate = 160
Initial volume = 0
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0
Resume MPD = No

S Q U E E Z E L I T E   S E T T I N G S

Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E -S /var/local
Resume MPD = No

L O C A L   D I S P L A Y   S E T T I N G S

Local UI display = Off
Mouse cursor = Off
Screen blank = 600 Secs
Brightness = 255
Pixel aspect ratio = Default
Rotate screen = 0 Deg

M O O D E   S T A R T U P   L O G

20191107 021057 worker: -- Start
20191107 021057 worker: Successfully daemonized
20191107 021057 worker: Integrity check (passed)
20191107 021057 worker: Session loaded
20191107 021057 worker: Debug logging (off)
20191107 021057 worker: ALSA volume set to (0%)
20191107 021058 worker: -- System
20191107 021059 worker: Host name     (moode)
20191107 021059 worker: moOde release (6.3.0 2019-10-02)
20191107 021059 worker: Raspbian OS   (10.1)
20191107 021059 worker: Linux kernel  (4.19.75-v7+ #1270)
20191107 021059 worker: Platform      (Pi-3B 1GB v1.2)
20191107 021059 worker: Architecture  (armv7l)
20191107 021059 worker: MPD version   (0.20.23)
20191107 021059 worker: CPU governor  (performance)
20191107 021059 worker: USB boot not enabled yet
20191107 021101 worker: File system expanded
20191107 021101 worker: HDMI port off
20191107 021101 worker: File check (OK)
20191107 021101 worker: -- Network
20191107 021101 worker: eth0 exists
20191107 021101 worker: eth0 (192.168.0.200)
20191107 021102 worker: wlan0 exists
20191107 021102 worker: wifi country (AU)
20191107 021102 worker: wlan0 SSID is blank
20191107 021102 worker: eth0 addr exists, AP mode not started
20191107 021102 worker: wlan0 address not assigned
20191107 021102 worker: -- Audio
20191107 021102 worker: ALSA outputs unmuted
20191107 021102 worker: ALSA card number (1)
20191107 021102 worker: Audio output (USB audio device)
20191107 021102 worker: Supported audio formats (U8, S16_LE)
20191107 021102 worker: ALSA mixer name (PCM)
20191107 021102 worker: MPD volume control (software)
20191107 021102 worker: Hdwr volume controller exists
20191107 021102 worker: -- Services
20191107 021102 worker: Reset renderer active state
20191107 021103 worker: MPD conf updated
20191107 021103 worker: MPD started
20191107 021103 worker: MPD accepting connections
20191107 021103 worker: Configure MPD outputs
20191107 021104 worker: MPD output 1 ALSA default (on)
20191107 021104 worker: MPD output 2 ALSA crossfeed (off)
20191107 021104 worker: MPD output 3 ALSA parametric eq (off)
20191107 021104 worker: MPD output 4 ALSA graphic eq (off)
20191107 021104 worker: MPD output 5 ALSA polarity inversion (off)
20191107 021104 worker: MPD output 6 ALSA bluetooth (off)
20191107 021104 worker: MPD output 7 HTTP stream (off)
20191107 021104 worker: MPD crossfade (off)
20191107 021104 worker: Audio source (Local)
20191107 021104 worker: Output device (Local)
20191107 021104 worker: UPnP renderer started
20191107 021104 worker: USB auto-mounter (udisks-glue)
20191107 021104 worker: -- Music sources
20191107 021104 worker: USB source (BLACK)
20191107 021104 worker: USB source (BLUE)
20191107 021104 worker: USB source (PQI_1G_BLUE)
20191107 021104 worker: USB source (SILVER)
20191107 021104 worker: NAS and UPnP sources (none configured)
20191107 021104 worker: -- Miscellaneous
20191107 021104 worker: Saved MPD vol level (0)
20191107 021104 worker: Preamp volume level (0)
20191107 021104 worker: MPD volume level (89) restored
20191107 021104 worker: ALSA volume level (100%)
20191107 021104 worker: Auto-play (Off)
20191107 021104 worker: Maintenance interval (6 hrs)
20191107 021104 worker: Screen saver activation (Never)
20191107 021104 worker: Session permissions (OK)
20191107 021104 worker: Watchdog started
20191107 021104 worker: Ready
Reply
#2
The AP will not start if an active Ethernet connection is present. This is to avoid having two active network interfaces which in the past has caused issues.

Btw, place log output in a code box for readability. It's the 5th button from the right on the toolbar when composing a post, and its the 3rd button from right when editing an existing post.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#3
(11-06-2019, 08:27 PM)Tim Curtis Wrote: The AP will not start if an active Ethernet connection is present. This is to avoid having two active network interfaces which in the past has caused issues.

Btw, place log output in a code box for readability. It's the 5th button from the right on the toolbar when composing a post, and its the 3rd button from right when editing an existing post.

Hey thanks for the heads up Tim.
I appreciate it.
I've also tested the 64bit kernel and the "test" MPD version.  On a 3B and a USB DAC it seems stable.
Reply
#4
Cool :-)
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply


Forum Jump: