Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Solved: Problem playing High Rez File
#26
Quick reminder:  JRiver is running on Intel Nuc I5 (Windows 10) / Gigabit Ehernet connected to a 4 channel Switch of my FREEBOX
                         FREEBOX is my router provided by my Internet Access provider connected to my Netgear switch = home switch distribution
                         Netgear switch model is Prosafe -JGS516 (non manageable switch)
 
I did check the ethernet connection of the 3 components above involved- The led (speed indicator) for the netgear was yellow = 100Mb for the SIG
After unplug / replug of the connection the led for the SIG is green (1Gb)

The new ethernet test results are

Code:
pi@moode:~ $ ethtool eth0
Settings for eth0:
       Supported ports: [ TP MII ]
       Supported link modes:   10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
                               1000baseT/Half 1000baseT/Full
       Supported pause frame use: No
       Supports auto-negotiation: Yes
       Supported FEC modes: Not reported
       Advertised link modes:  10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
                               1000baseT/Full
       Advertised pause frame use: Symmetric
       Advertised auto-negotiation: Yes
       Advertised FEC modes: Not reported
       Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                            100baseT/Half 100baseT/Full
                                            1000baseT/Full
       Link partner advertised pause frame use: Symmetric
       Link partner advertised auto-negotiation: Yes
       Link partner advertised FEC modes: Not reported
       Speed: 1000Mb/s
       Duplex: Full
       Port: MII
       PHYAD: 3
       Transceiver: internal
       Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
       Current message level: 0x00000007 (7)
                              drv probe link
       Link detected: yes


Audio distortion (scratches) are still there after this opération

Other log are

Code:
pi@moode:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.19.83-v8+ (dom@buildbot) (gcc version 5.4.0 20160                                                      609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9)) #1277 SMP PREEMPT Mon Nov 11 16:53:3                                                      0 GMT 2019
[    0.000000] Machine model: Raspberry Pi Compute Module 3 Plus Rev 1.0
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 8 MiB at 0x000000003ac00000
[    0.000000] On node 0 totalpages: 242688
[    0.000000]   DMA32 zone: 3792 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 242688 pages, LIFO batch:63
[    0.000000] random: get_random_bytes called from start_kernel+0xb8/0x47c with                                                       crng_init=0
[    0.000000] percpu: Embedded 23 pages/cpu s56728 r8192 d29288 u94208
[    0.000000] pcpu-alloc: s56728 r8192 d29288 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 843419
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 238896
[    0.000000] Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1920 bcm                                                      2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:99:BB:4C vc_                                                      mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  net.ifnames=0 console=ttyAMA                                                      0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadlin                                                      e fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Memory: 929612K/970752K available (8380K kernel code, 1044K rwdat                                                      a, 2660K rodata, 1024K init, 1113K bss, 32948K reserved, 8192K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 29309 entries in 115 pages
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:                                                       0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980                                                      46511078ns
[    0.000265] Console: colour dummy device 80x25
[    0.000917] console [tty1] enabled
[    0.000983] Calibrating delay loop (skipped), value calculated using timer fr                                                      equency.. 38.40 BogoMIPS (lpj=76800)
[    0.001042] pid_max: default: 32768 minimum: 301
[    0.001469] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.001526] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.024107] ASID allocator initialised with 32768 entries
[    0.032105] rcu: Hierarchical SRCU implementation.
[    0.040738] EFI services will not be available.
[    0.048184] smp: Bringing up secondary CPUs ...
[    0.080450] Detected VIPT I-cache on CPU1
[    0.080521] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.112576] Detected VIPT I-cache on CPU2
[    0.112625] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.144736] Detected VIPT I-cache on CPU3
[    0.144782] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.144987] smp: Brought up 1 node, 4 CPUs
[    0.145142] SMP: Total of 4 processors activated.
[    0.145176] CPU features: detected: 32-bit EL0 Support
[    0.145875] CPU: All CPU(s) started at EL2
[    0.145950] alternatives: patching kernel code
[    0.147411] devtmpfs: initialized
[    0.163267] Enabled cp15_barrier support
[    0.163334] Enabled setend support
[    0.163882] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                      x_idle_ns: 7645041785100000 ns
[    0.163945] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.164660] pinctrl core: initialized pinctrl subsystem
[    0.165549] DMI not present or invalid.
[    0.166118] NET: Registered protocol family 16
[    0.172368] cpuidle: using governor menu
[    0.172909] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval___                                                      _))
[    0.172955] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.177489] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.177671] Serial: AMBA PL011 UART driver
[    0.182256] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.229910] bcm2835-dma 3f007000.dma: DMA legacy API manager at (____ptrval__                                                      __), dmachans=0x1
[    0.232195] vgaarb: loaded
[    0.232694] SCSI subsystem initialized
[    0.233003] usbcore: registered new interface driver usbfs
[    0.233233] usbcore: registered new interface driver hub
[    0.233392] usbcore: registered new device driver usb
[    0.233551] pps_core: LinuxPPS API ver. 1 registered
[    0.233585] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                                      tti <giometti@linux.it>
[    0.233645] PTP clock support registered
[    0.241175] raspberrypi-firmware soc:firmware: Attached to firmware from 2019                                                      -11-08 18:12, variant start
[    0.245179] raspberrypi-firmware soc:firmware: Firmware hash is 6f8d4071a1904                                                      6e8f7ddb687d525569228d922bb
[    0.251054] clocksource: Switched to clocksource arch_sys_counter
[    0.372955] VFS: Disk quotas dquot_6.6.0
[    0.373102] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.373407] FS-Cache: Loaded
[    0.373658] CacheFiles: Loaded
[    0.385835] NET: Registered protocol family 2
[    0.386798] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192                                                       bytes)
[    0.386872] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.387025] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.387310] TCP: Hash tables configured (established 8192 bind 8192)
[    0.387596] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.387674] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.388044] NET: Registered protocol family 1
[    0.389052] RPC: Registered named UNIX socket transport module.
[    0.389089] RPC: Registered udp transport module.
[    0.389119] RPC: Registered tcp transport module.
[    0.389149] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.389192] PCI: CLS 0 bytes, default 64
[    0.395526] Initialise system trusted keyrings
[    0.395856] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.407840] FS-Cache: Netfs 'nfs' registered for caching
[    0.408924] NFS: Registering the id_resolver key type
[    0.408985] Key type id_resolver registered
[    0.409016] Key type id_legacy registered
[    0.409059] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.412930] Key type asymmetric registered
[    0.412971] Asymmetric key parser 'x509' registered
[    0.413062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                      48)
[    0.413347] io scheduler noop registered
[    0.413382] io scheduler deadline registered (default)
[    0.413653] io scheduler cfq registered
[    0.413688] io scheduler mq-deadline registered (default)
[    0.413722] io scheduler kyber registered
[    0.419432] bcm2708_fb soc:fb: FB found 1 display(s)
[    0.451222] Console: switching to colour frame buffer device 240x67
[    0.469483] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 192                                                      0x1080
[    0.473174] bcm2835-rng 3f104000.rng: hwrng registered
[    0.473869] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000                                                      000(1024 MiB)
[    0.474994] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f2                                                      00000
[    0.475542] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.490928] brd: module loaded
[    0.506482] loop: module loaded
[    0.507761] Loading iSCSI transport class v2.0-870.
[    0.514494] libphy: Fixed MDIO Bus: probed
[    0.515022] usbcore: registered new interface driver r8152
[    0.515258] usbcore: registered new interface driver lan78xx
[    0.515434] usbcore: registered new interface driver smsc95xx
[    0.515957] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.544074] dwc_otg 3f980000.usb: base=(____ptrval____)
[    0.757689] Core Release: 2.80a
[    0.757769] Setting default values for core params
[    0.757888] Finished setting default values for core params
[    0.971595] Using Buffer DMA mode
[    0.971674] Periodic Transfer Interrupt Enhancement - disabled
[    0.971787] Multiprocessor Interrupt Enhancement - disabled
[    0.971897] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.971991] Dedicated Tx FIFOs mode
[    0.972747] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = fffff                                                      f80091d1000 dma = 0x00000000fad04000 len=9024
[    0.972961] FIQ FSM acceleration enabled for :
              Non-periodic Split Transactions
              Periodic Split Transactions
              High-Speed Isochronous Endpoints
              Interrupt/Control Split Transaction hack enabled
[    0.973333] dwc_otg: Microframe scheduler enabled
[    0.973488] WARN::hcd_init_fiq:497: MPHI regs_base at ffffff800805d000
[    0.973672] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.973801] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number                                                       1
[    0.973990] dwc_otg 3f980000.usb: irq 9, io mem 0x00000000
[    0.974140] Init: Port Power? op_state=1
[    0.974223] Init: Power Port (0)
[    0.974681] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc                                                      dDevice= 4.19
[    0.974840] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                      1
[    0.974977] usb usb1: Product: DWC OTG Controller
[    0.979482] usb usb1: Manufacturer: Linux 4.19.83-v8+ dwc_otg_hcd
[    0.983953] usb usb1: SerialNumber: 3f980000.usb
[    0.989212] hub 1-0:1.0: USB hub found
[    0.993702] hub 1-0:1.0: 1 port detected
[    0.998922] dwc_otg: FIQ enabled
[    0.998934] dwc_otg: NAK holdoff enabled
[    0.998946] dwc_otg: FIQ split-transaction FSM enabled
[    0.998964] Module dwc_common_port init
[    0.999455] usbcore: registered new interface driver uas
[    1.004042] usbcore: registered new interface driver usb-storage
[    1.008763] mousedev: PS/2 mouse device common for all mice
[    1.014784] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.019517] bcm2835-cpufreq: min=600000 max=1200000
[    1.024718] sdhci: Secure Digital Host Controller Interface driver
[    1.029187] sdhci: Copyright(c) Pierre Ossman
[    1.034325] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    1.039140] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.044766] ledtrig-cpu: registered to indicate activity on CPUs
[    1.049353] hidraw: raw HID events driver (C) Jiri Kosina
[    1.054035] usbcore: registered new interface driver usbhid
[    1.058511] usbhid: USB HID core driver
[    1.064266] vchiq: vchiq_init_state: slot_zero = (____ptrval____), is_master                                                       = 0
[    1.072824] Initializing XFRM netlink socket
[    1.077435] NET: Registered protocol family 17
[    1.082146] Key type dns_resolver registered
[    1.088037] registered taskstats version 1
[    1.092575] Loading compiled-in X.509 certificates
[    1.109434] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    1.114197] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 66, base_baud                                                       = 0) is a PL011 rev2
[    2.088291] console [ttyAMA0] enabled
[    2.098490] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains drive                                                      r
[    2.112428] sdhost: log_buf @ (____ptrval____) (fad07000)
[    2.170889] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.184951] of_cfs_init
[    2.192047] of_cfs_init: OK
[    2.200201] Waiting for root device PARTUUID=6c586e13-02...
[    2.216620] Indeed it is in host mode hprt0 = 00021501
[    2.258568] mmc0: host does not support reading read-only switch, assuming wr                                                      ite-enable
[    2.285636] mmc0: new high speed SDHC card at address 0007
[    2.309200] mmcblk0: mmc0:0007 SD16G 14.4 GiB
[    2.328463]  mmcblk0: p1 p2
[    2.343170] random: fast init done
[    2.374045] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O                                                      pts: (null)
[    2.387094] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.408680] devtmpfs: mounted
[    2.421483] Freeing unused kernel memory: 1024K
[    2.430968] Run /sbin/init as init process
[    2.459123] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.470686] Indeed it is in host mode hprt0 = 00001101
[    2.692273] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcd                                                      Device= 1.00
[    2.705552] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.717621] usb 1-1: SerialNumber: D80008712C4B
[    2.727983] hub 1-1:1.0: USB hub found
[    2.736651] hub 1-1:1.0: 4 ports detected
[    3.031136] usb 1-1.1: new full-speed USB device number 3 using dwc_otg
[    3.152630] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52b, b                                                      cdDevice=12.03
[    3.165865] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber                                                      =0
[    3.178098] usb 1-1.1: Product: USB Receiver
[    3.187221] usb 1-1.1: Manufacturer: Logitech
[    3.279832] systemd[1]: System time before build time, advancing clock.
[    3.291133] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    3.404621] usb 1-1.2: New USB device found, idVendor=16d0, idProduct=071a, b                                                      cdDevice= 1.99
[    3.417925] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber                                                      =3
[    3.430124] usb 1-1.2: Product: Combo384 Amanero
[    3.439649] usb 1-1.2: Manufacturer: Amanero Technologies
[    3.449910] usb 1-1.2: SerialNumber: 413-001
[    3.539175] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[    3.573642] NET: Registered protocol family 10
[    3.584635] Segment Routing with IPv6
[    3.661625] usb 1-1.3: New USB device found, idVendor=0b95, idProduct=1790, b                                                      cdDevice= 1.00
[    3.675178] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber                                                      =3
[    3.687449] usb 1-1.3: Product: AX88179
[    3.687469] usb 1-1.3: Manufacturer: ASIX Elec. Corp.
[    3.696347] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SEL                                                      INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +                                                      XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr                                                      id)
[    3.706073] usb 1-1.3: SerialNumber: 00000000000028
[    3.738841] systemd[1]: Detected architecture arm64.
[    3.785118] systemd[1]: Set hostname to <moode>.
[    3.839207] usb 1-1.4: new high-speed USB device number 6 using dwc_otg
[    3.867715] random: crng init done
[    3.916363] uart-pl011 3f201000.serial: no DMA platform data
[    4.083329] usb 1-1.4: New USB device found, idVendor=05dc, idProduct=c75c, b                                                      cdDevice= 1.01
[    4.097181] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber                                                      =3
[    4.109889] usb 1-1.4: Product: USB Flash Drive
[    4.119787] usb 1-1.4: Manufacturer: Lexar
[    4.129221] usb 1-1.4: SerialNumber: 1D27D6A0AC71F6F906D0
[    4.141118] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[    4.159588] scsi host0: usb-storage 1-1.4:1.0
[    4.688462] systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= refer                                                      ences path below legacy directory /var/run/, updating /var/run/samba/winbindd.pi                                                      d → /run/samba/winbindd.pid; please update the unit file accordingly.
[    4.795791] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= referenc                                                      es path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /ru                                                      n/samba/smbd.pid; please update the unit file accordingly.
[    4.864869] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= referenc                                                      es path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /ru                                                      n/samba/nmbd.pid; please update the unit file accordingly.
[    5.043744] systemd[1]: Started Dispatch Password Requests to Console Directo                                                      ry Watch.
[    5.065241] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.088209] systemd[1]: Created slice User and Session Slice.
[    5.138232] systemd[1]: Condition check resulted in Journal Audit Socket bein                                                      g skipped.
[    5.281250] scsi 0:0:0:0: Direct-Access     Lexar    USB Flash Drive  8.07 PQ                                                      : 0 ANSI: 4
[    5.284194] sd 0:0:0:0: [sda] 15638528 512-byte logical blocks: (8.01 GB/7.46                                                       GiB)
[    5.285063] sd 0:0:0:0: [sda] Write Protect is off
[    5.285081] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    5.285954] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe                                                      sn't support DPO or FUA
[    6.530760]  sda: sda1
[    6.538688] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    6.649069] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.778801] systemd-journald[106]: Received request to flush runtime journal                                                       from PID 1
[    7.274996] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.662981] vc_sm_cma: module is from the staging directory, the quality is u                                                      nknown, you have been warned.
[    7.669643] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    7.669672] [vc_sm_connected_init]: start
[    7.676964] media: Linux media interface: v0.10
[    7.677659] [vc_sm_connected_init]: installed successfully
[    7.759355] videodev: Linux video capture interface: v2.00
[    7.840741] bcm2835_mmal_vchiq: module is from the staging directory, the qua                                                      lity is unknown, you have been warned.
[    7.906495] bcm2835_v4l2: module is from the staging directory, the quality i                                                      s unknown, you have been warned.
[    7.911350] bcm2835_codec: module is from the staging directory, the quality                                                       is unknown, you have been warned.
[    7.920322] snd_bcm2835: module is from the staging directory, the quality is                                                       unknown, you have been warned.
[    7.940846] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    7.940926] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    7.942338] bcm2835_audio soc:audio: card created with 8 channels
[    7.946287] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    7.946345] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    7.951987] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    7.952039] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    8.228553] usbcore: registered new interface driver snd-usb-audio
[    8.263427] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HI                                                      D v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.1/input2
[    8.391732] input: Logitech Unifying Device. Wireless PID:404c Keyboard as /d                                                      evices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/00                                                      03:046D:404C.0004/input/input0
[    8.392899] input: Logitech Unifying Device. Wireless PID:404c Mouse as /devi                                                      ces/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:                                                      046D:404C.0004/input/input1
[    8.399861] input: Logitech Unifying Device. Wireless PID:404c Consumer Contr                                                      ol as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B                                                      .0003/0003:046D:404C.0004/input/input2
[    8.400119] input: Logitech Unifying Device. Wireless PID:404c System Control                                                       as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0                                                      003/0003:046D:404C.0004/input/input3
[    8.400503] hid-generic 0003:046D:404C.0004: input,hidraw1: USB HID v1.11 Key                                                      board [Logitech Unifying Device. Wireless PID:404c] on usb-3f980000.usb-1.1:1
[    8.652585] ax88179_178a 1-1.3:1.0 eth0: register 'ax88179_178a' at usb-3f980                                                      000.usb-1.3, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:17:f7:00:a8:66
[    8.652871] usbcore: registered new interface driver ax88179_178a
[    9.180299] input: Logitech K830 as /devices/platform/soc/3f980000.usb/usb1/1                                                      -1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input7
[    9.181795] logitech-hidpp-device 0003:046D:404C.0004: input,hidraw1: USB HID                                                       v1.11 Keyboard [Logitech K830] on usb-3f980000.usb-1.1:1
[   12.042758] 8021q: 802.1Q VLAN Support v1.8
[   12.243530] cfg80211: Loading compiled-in X.509 certificates for regulatory d                                                      atabase
[   12.287759] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   12.675172] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.884344] ax88179_178a 1-1.3:1.0 eth0: ax88179 - Link status is: 1
[   26.894580] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   28.930589] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net                                                      .ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead
[   34.254621] FAT-fs (sda1): Volume was not properly unmounted. Some data may b                                                      e corrupt. Please run fsck.
[  789.641748] usb 1-1.2: USB disconnect, device number 4
[19565.158141] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
[19565.263762] usb 1-1.2: New USB device found, idVendor=16d0, idProduct=071a, b                                                      cdDevice= 1.99
[19565.263776] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber                                                      =3
[19565.263784] usb 1-1.2: Product: Combo384 Amanero
[19565.263792] usb 1-1.2: Manufacturer: Amanero Technologies
[19565.263800] usb 1-1.2: SerialNumber: 413-001
[20070.281645] usb 1-1.2: USB disconnect, device number 7
[40177.768052] usb 1-1.2: new high-speed USB device number 8 using dwc_otg
[40177.869542] usb 1-1.2: New USB device found, idVendor=16d0, idProduct=071a, b                                                      cdDevice= 1.99
[40177.869554] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber                                                      =3
[40177.869562] usb 1-1.2: Product: Combo384 Amanero
[40177.869570] usb 1-1.2: Manufacturer: Amanero Technologies
[40177.869577] usb 1-1.2: SerialNumber: 413-001
[45836.425884] usb 1-1.2: USB disconnect, device number 8
[54876.006371] usb 1-1.2: new high-speed USB device number 9 using dwc_otg
[54876.108795] usb 1-1.2: New USB device found, idVendor=16d0, idProduct=071a, b                                                      cdDevice= 1.99
[54876.108821] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber                                                      =3
[54876.108837] usb 1-1.2: Product: Combo384 Amanero
[54876.108852] usb 1-1.2: Manufacturer: Amanero Technologies
[54876.108868] usb 1-1.2: SerialNumber: 413-001
[57791.625716] usb 1-1.2: USB disconnect, device number 9
[76629.095391] usb 1-1.2: new high-speed USB device number 10 using dwc_otg
[76629.196893] usb 1-1.2: New USB device found, idVendor=16d0, idProduct=071a, b                                                      cdDevice= 1.99
[76629.196905] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber                                                      =3
[76629.196914] usb 1-1.2: Product: Combo384 Amanero
[76629.196922] usb 1-1.2: Manufacturer: Amanero Technologies
[76629.196929] usb 1-1.2: SerialNumber: 413-001
[77246.212552] ax88179_178a 1-1.3:1.0 eth0: ax88179 - Link status is: 0
[77291.652540] ax88179_178a 1-1.3:1.0 eth0: ax88179 - Link status is: 1
[77366.916567] ax88179_178a 1-1.3:1.0 eth0: ax88179 - Link status is: 0
[77449.092557] ax88179_178a 1-1.3:1.0 eth0: ax88179 - Link status is: 1

Tomorrrow I will test with a new Power supply (not a shanti one) and also with a WIFI /Usb connector ...

thanks again for your help on that tricky problem
Reply


Messages In This Thread
Problem playing High Rez File - by Facel - 12-10-2019, 12:39 PM
RE: Problem playing High Rez File - by Tim Curtis - 12-10-2019, 01:09 PM
RE: Problem playing High Rez File - by Facel - 12-10-2019, 06:33 PM
RE: Problem playing High Rez File - by Tim Curtis - 12-10-2019, 07:10 PM
RE: Problem playing High Rez File - by Facel - 12-10-2019, 08:55 PM
RE: Problem playing High Rez File - by DRONE7 - 12-11-2019, 05:04 AM
RE: Problem playing High Rez File - by Facel - 12-11-2019, 06:30 AM
RE: Problem playing High Rez File - by Tim Curtis - 12-11-2019, 12:55 PM
RE: Problem playing High Rez File - by Facel - 12-11-2019, 03:31 PM
RE: Problem playing High Rez File - by Facel - 12-11-2019, 07:19 PM
RE: Problem playing High Rez File - by Facel - 12-12-2019, 01:05 PM
RE: Problem playing High Rez File - by Tim Curtis - 12-12-2019, 02:14 PM
RE: Problem playing High Rez File - by Facel - 12-12-2019, 04:34 PM
RE: Problem playing High Rez File - by Facel - 12-12-2019, 07:05 PM
RE: Problem playing High Rez File - by Tim Curtis - 12-12-2019, 08:40 PM
RE: Problem playing High Rez File - by Facel - 12-12-2019, 10:11 PM
RE: Problem playing High Rez File - by Tim Curtis - 12-12-2019, 11:06 PM
RE: Problem playing High Rez File - by Tim Curtis - 12-13-2019, 12:35 AM
RE: Problem playing High Rez File - by Facel - 12-13-2019, 04:36 AM
RE: Problem playing High Rez File - by Tim Curtis - 12-13-2019, 11:42 AM
RE: Problem playing High Rez File - by Botte - 12-13-2019, 02:48 PM
RE: Problem playing High Rez File - by Facel - 12-13-2019, 03:19 PM
RE: Problem playing High Rez File - by Facel - 12-16-2019, 02:20 PM
RE: Problem playing High Rez File - by Tim Curtis - 12-16-2019, 05:25 PM
RE: Problem playing High Rez File - by Facel - 12-17-2019, 08:46 AM
RE: Problem playing High Rez File - by Tim Curtis - 12-17-2019, 02:30 PM

Forum Jump: