Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Cracks inside track
#4
Pops, snaps and tearing noises during playback is primarily a DAC issue caused by clocking or jitter problems. Specifically, when changing tracks and you hear a noise whenever the DAC switches between sample rates the DAC or the driver is usually to blame.
A quick search pulls up many reports of this DAC board having audible clocking issues.

A couple of ways to relieve the snapping sounds could be to enable resampling in Moode's audio settings which can force the DAC to stick to a specific clock/sample rate. You could also try to increase mpd's buffer in case your network is problematic this is under [Configure] > [MPD] > [Audio Buffers], try doubling the value. Ultimately its seems your DAC is the most likely culprit.
Reply


Messages In This Thread
Cracks inside track - by quadrifoglio - 01-30-2020, 10:36 PM
RE: Cracks inside track - by Tim Curtis - 01-31-2020, 12:03 AM
RE: Cracks inside track - by quadrifoglio - 01-31-2020, 06:39 AM
RE: Cracks inside track - by vinnn - 01-31-2020, 09:19 AM
RE: Cracks inside track - by quadrifoglio - 01-31-2020, 10:05 AM

Forum Jump: