Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: HDMI from TV
#11
hi Tim
related to last info for  coax S/PDIF input port...
I've try to use this feature but no hear the audio from RCA output  

for my config I've


aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [I-Sabre Q2M DAC], device 0: I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0 [I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0]
 Subdevices: 0/1
 Subdevice #0: subdevice #0


and logs are


20220108 162801 worker: -- Audio debug
20220108 162801 worker: ALSA cards: (0:DAC | 1:empty | 2:empty | 3:empty
20220108 162801 worker: MPD config: (0:Audiophonics ES9028/9038 DAC | mixer:(HDMI) | card:0)
20220108 162801 worker: ALSA mixer actual (Digital)
20220108 162801 worker: ALSA Digital volume set to (amixer: Mixer hw:0 load error: Remote I/O error)
20220108 162801 worker: -- System

what I wrong?
Reply
#12
Quote:what I wrong?

You have no input device.
You have an output device...
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [I-Sabre Q2M DAC], device 0: I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0 [I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0]
Subdevices: 0/1
Subdevice #0: subdevice #0


read this
https://moodeaudio.org/forum/showthread....9#pid16929
----------
bob
Reply
#13
(01-09-2022, 01:39 AM)AndromedaStrain Wrote: hi Tim
related to last info for  coax S/PDIF input port...
I've try to use this feature but no hear the audio from RCA output  

for my config I've


aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [I-Sabre Q2M DAC], device 0: I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0 [I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0]
 Subdevices: 0/1
 Subdevice #0: subdevice #0


and logs are


20220108 162801 worker: -- Audio debug
20220108 162801 worker: ALSA cards: (0Big GrinAC | 1:empty | 2:empty | 3:empty
20220108 162801 worker: MPD config: (0:Audiophonics ES9028/9038 DAC | mixerSadHDMI) | card:0)
20220108 162801 worker: ALSA mixer actual (Digital)
20220108 162801 worker: ALSA Digital volume set to (amixer: Mixer hw:0 load error: Remote I/O error)
20220108 162801 worker: -- System

what I wrong?

As @DRONE7 mentioned, your log output looks very odd.

Reboot then post the entire Moode startup log.

Code:
moodeutl -l
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#14
(02-26-2020, 12:50 PM)vinnn Wrote: That is an HDMI display port, for outputting video 

A solution would be connect your sources to something like AV receiver which'll power passive loudspeakers or connect your Pi to one of the TVs inputs and output the TV's audio to soundbar/active speakers or passive speakers via an integrated amplifier.

Yes, using an AV receiver works great, including being able (you need to turn it on in Moode's setup commands, IIRC) to see the interface on the TV.

Using an AV receiver also has the benefit of the HDMI sending data out to the receiver's DAC,  which is likely a better one than the TV's.  

And best of all, its more useable, for greater WAF.  She's using the Moode box now, due to a single TV input button gets her there as quickly as any other TV menu item, thanks to the comm interface in recent HDMI.
Reply


Forum Jump: