08-29-2020, 09:41 AM
Thanks Bob, for all your wisdom on those cases -- and I came to realize that the Anidees doesn't have any cutouts in the aluminum frame for the HiFi Berry HAT. :o(
I don't know how I missed that Geekworm DRONE7... really great case. That NEO is a fantastic case as well -- but after using the Smart Power Button on the Argon One (I don't believe any other case has that??) -- I'm in love.
Between the power button and your comments about the tremendous thermal qualities of this case... I decided to keep the Argon One ... I had some little rubber furniture wedges laying around that worked perfectly (http://www.amazon.com/gp/product/B01EN6HUHW) -- to go between the rear-top of the case, and the bottom of the HiFi Berry DAC HAT. I used the Argon / Moode script on this forum (http://moodeaudio.org/forum/showthread.php?tid=2227) and it worked flawlessly for the Smart Power Button (although I can't verify the fan is working properly since it hasn't gotten hot enough to kick on). I push the Smart Power Button on the Argon One, and voila! ... the R Pi with HiFi Berry boot > and a few seconds later the sleeping touchscreen kicks on > then the Active Speakers kick on > then the Subwoofer kicks on - "One Button to Rule Them All"! And now with Smart Power down, one button and everything shuts down / goes back to sleep -- lovin' it.
Thanks again for all your help... and for all the great contributors on this forum that make all these things so much easier.
I posted the best resolution settings I found with Moode and a 12" screen here, for anyone it may help: http://moodeaudio.org/forum/showthread.php?tid=2921
Warmest regards,
Lusay
I don't know how I missed that Geekworm DRONE7... really great case. That NEO is a fantastic case as well -- but after using the Smart Power Button on the Argon One (I don't believe any other case has that??) -- I'm in love.
Between the power button and your comments about the tremendous thermal qualities of this case... I decided to keep the Argon One ... I had some little rubber furniture wedges laying around that worked perfectly (http://www.amazon.com/gp/product/B01EN6HUHW) -- to go between the rear-top of the case, and the bottom of the HiFi Berry DAC HAT. I used the Argon / Moode script on this forum (http://moodeaudio.org/forum/showthread.php?tid=2227) and it worked flawlessly for the Smart Power Button (although I can't verify the fan is working properly since it hasn't gotten hot enough to kick on). I push the Smart Power Button on the Argon One, and voila! ... the R Pi with HiFi Berry boot > and a few seconds later the sleeping touchscreen kicks on > then the Active Speakers kick on > then the Subwoofer kicks on - "One Button to Rule Them All"! And now with Smart Power down, one button and everything shuts down / goes back to sleep -- lovin' it.
Thanks again for all your help... and for all the great contributors on this forum that make all these things so much easier.
I posted the best resolution settings I found with Moode and a 12" screen here, for anyone it may help: http://moodeaudio.org/forum/showthread.php?tid=2921
Warmest regards,
Lusay
