Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: Raspberry 3 B+ crash after booting
#1
Hello !

first of all I'm able to install and run Volumio. I decided to tried Moode but unfortunately the Rpi 3 B+ is able to boot but unable to get a IP address and if I connect a screen it switch to black screen just after the login prompt ....

All are working on a Raspberry pi 4.

Are you aware about this issue ?

Regards
Reply
#2
I own a pi3B and a pi4. On both, moode works without problems.
Reply
#3
Likewise, no issues whatsoever on 3B, 3B+ or any of the other models.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#4
Have you tried to look if you see a network named something like "moode" max 2/3 minutes after boot?
It could be the Pi3 for some reason cannot get the IP and reverts to AccessPoint mode.
If this is the case, you can connect to such a network, SSH into the PI, get its startup log by moodeutl -l, and post it here in a <code> block (see icons above-right)
Reply


Forum Jump: