Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: I can not change volume control in settings mpd
#1
Hi!

Config:
Release Information

  • Release: 6.4.2 2020-02-12
Platform Information

  • Raspbian: null

  • Linux kernel: 4.19.97-v8+ #1293

  • Platform: Pi-3B+ 1GB v1.3

  • Architecture: aarch64

  • MPD version: 0.21.16
+ HiFiBerry Digi+


In settings Audio:
I2S audio device:  HiFiBerry Digi(Digi+)

In settings MPD:
Device type: I2S audio device 
Volume control: Software

Not possible to change volume control on the Disabled, after click save - setting changes back to software.

Help me please.
[size=undefined]
 

[/size]
Reply
#2
Raspbian: null suggests a broken image.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#3
(03-22-2020, 03:58 PM)Tim Curtis Wrote: Raspbian: null suggests a broken image.

can this be fixed through the console?
Reply
#4
Best bet is to start with fresh, stock image downloaded from moodeaudio.org and burned to a known good SDCard. Boot it up and verify that the Moode log is error free. moodeutl -l
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#5
Raspbian: null image become after installation pydPiper
Reply
#6
A lot of people use balenaEtcher and report that it works really well.
https://www.balena.io/etcher/
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#7
After:
sudo apt-get remove pydPiper image Raspbian established back
Reply
#8
Interesting. You should prolly post the issue in the pydPiper thread.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply


Forum Jump: