Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Idea: MOODE Startup Spashscreen
#21
I think we let @swizzle design the stock splash image :-)
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#22
(05-02-2020, 10:47 PM)Tim Curtis Wrote: I think we let @swizzle design the stock splash image :-)
Hello Tim,
that I had already finished it ...
Ciao
Cardone
Reply
#23
lol
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#24
(04-09-2020, 12:22 PM)Tim Curtis Wrote: Prolly something like below.
https://scribles.net/customizing-boot-up...pberry-pi/
https://github.com/retropie/retropie-set...lashscreen

Hi, I am trying to customize the soashscreen and I followed the instructions on the scribbles post, but I'm stuck at the first passage: locate /usr/share/plymouth...

Using Moode 7 on the console it says "no such file or directory"

Can someone help? thank you
Reply
#25
No-one can help?
Reply
#26
So is the plymouth package installed on RaspiOS Lite (on which moOde is built)? Let's ask dpkg

Code:
pi@rpi3a:~ $ dpkg -l|grep -i plymouth
pi@rpi3a:~ $ 


So the answer is no.

Next step. Is the package available in the repos known to this installation? Let's ask apt-cache

Code:
pi@rpi3a:~ $ apt-cache show plymouth
Package: plymouth
Version: 0.9.4-1.1+rpt2
Architecture: armhf
...yada yada yada...

So, the answer is yes.

Next step. Install plymouth

Code:
pi@rpi3a:~ $ sudo apt-get -s install plymouth
Reading package lists... Done
Building dependency tree      
Reading state information... Done
The following additional packages will be installed:
 libplymouth4
Suggested packages:
 desktop-base plymouth-themes
The following NEW packages will be installed:
 libplymouth4 plymouth
0 upgraded, 2 newly installed, 0 to remove and 216 not upgraded.
Inst libplymouth4 (0.9.4-1.1+rpt2 Raspberry Pi Foundation:testing [armhf])
Inst plymouth (0.9.4-1.1+rpt2 Raspberry Pi Foundation:testing [armhf])
Conf libplymouth4 (0.9.4-1.1+rpt2 Raspberry Pi Foundation:testing [armhf])
Conf plymouth (0.9.4-1.1+rpt2 Raspberry Pi Foundation:testing [armhf])

Note that I only simulated the installation 'cuz i don't want it but the response shows the installation requires just two packages. Invoke this command without the -s option to actually install plymouth.

Final step. See if you can proceed with the rest of the recipe.

Regards,
Kent
Reply
#27
(10-14-2021, 07:22 PM)TheOldPresbyope Wrote: So is the plymouth package installed on RaspiOS Lite (on which moOde is built)? Let's ask dpkg

Code:
pi@rpi3a:~ $ dpkg -l|grep -i plymouth
pi@rpi3a:~ $ 


So the answer is no.

Next step. Is the package available in the repos known to this installation? Let's ask apt-cache

Code:
pi@rpi3a:~ $ apt-cache show plymouth
Package: plymouth
Version: 0.9.4-1.1+rpt2
Architecture: armhf
...yada yada yada...

So, the answer is yes.

Next step. Install plymouth

Code:
pi@rpi3a:~ $ sudo apt-get -s install plymouth
Reading package lists... Done
Building dependency tree      
Reading state information... Done
The following additional packages will be installed:
 libplymouth4
Suggested packages:
 desktop-base plymouth-themes
The following NEW packages will be installed:
 libplymouth4 plymouth
0 upgraded, 2 newly installed, 0 to remove and 216 not upgraded.
Inst libplymouth4 (0.9.4-1.1+rpt2 Raspberry Pi Foundation:testing [armhf])
Inst plymouth (0.9.4-1.1+rpt2 Raspberry Pi Foundation:testing [armhf])
Conf libplymouth4 (0.9.4-1.1+rpt2 Raspberry Pi Foundation:testing [armhf])
Conf plymouth (0.9.4-1.1+rpt2 Raspberry Pi Foundation:testing [armhf])

Note that I only simulated the installation 'cuz i don't want it but the response shows the installation requires just two packages. Invoke this command without the -s option to actually install plymouth.

Final step. See if you can proceed with the rest of the recipe.

Regards,
Kent

Thanks Ken,
You're THE MAN! 
I didn't know there was a thing called plymouth. 
Just instelled and now it works perfectly!
I simply need to try different picture sizes since my display is 1024*600 and the images are too small or not shown (probably due to different sizes).

I will post the result when everything will be ok.

Thanks Again
Reply
#28
(05-01-2020, 09:11 PM)JST1963 Wrote: Weird how fast people forget...

All this was nicely explained and tested by a guy "Georgets" almost 2 years ago. This mod has been on my moOde player ever since, and it still works.

http://moodeaudio.org/forum/showthread.p...ght=splash

I can not find this post? Anyone able to recover it, or the instructions?

Edit: never mind. It is indeed not that hard. 
This thread helped: Moode logo at startup
Reply


Forum Jump: