01-06-2021, 11:30 AM
Dear all!
To get my system to have a sound output, I manually had to edit the 'config.txt' file to commend out the parameter 'dtparam=audio=off'.
This procedure is in accordance with the set-up guide from the HiFiBerry.
https://www.hifiberry.com/docs/software/...ux-3-18-x/
I like to ask, if someone also had the need to do so for this kind of sound-card?
My current config.txt looks:
So as you can see, due to the connected display, I had to edit the 'config.txt' anyway.
But maybe this could be respected in the scrips, in case this is a common issue.
Best Regards.
------------------------------------------------------------------------------------
Board: Raspberry Pi3B+
Soundcard: HiFi-Berry Amp2
OS: moOde audio player 7.0.1, installed as iso
Set-up date: 2021-01-04
To get my system to have a sound output, I manually had to edit the 'config.txt' file to commend out the parameter 'dtparam=audio=off'.
This procedure is in accordance with the set-up guide from the HiFiBerry.
https://www.hifiberry.com/docs/software/...ux-3-18-x/
I like to ask, if someone also had the need to do so for this kind of sound-card?
My current config.txt looks:
Code:
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
#hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
#dtparam=audio=off
#######################################
# Display
# Waveshare 7inch HDMI LCD
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=10
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
#
#######################################
dtoverlay=hifiberry-dacplus
#dtoverlay=disable-wifi
dtoverlay=disable-bt
So as you can see, due to the connected display, I had to edit the 'config.txt' anyway.
But maybe this could be respected in the scrips, in case this is a common issue.
Best Regards.
------------------------------------------------------------------------------------
Board: Raspberry Pi3B+
Soundcard: HiFi-Berry Amp2
OS: moOde audio player 7.0.1, installed as iso
Set-up date: 2021-01-04