Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: ES9028q2m with latest moodeaudio
#11
Just rule out the obvious, you have turned the volume up in the moOde GUI haven't you?
I ask because I spent ages trying to work out why I was getting no sound a while back only to find (after an awfully long time playing with all sorts of settings) that the volume mixer had swapped to software at 0 after I'd been using Bluetooth for a bit...
----------------
Robert
Reply
#12
I have a RASPDAC MINI, no problems for me with Audiophonics ES9028/9038 DAC I2S entry.

I don't know if it's relevant, but i have one difference in the log:

Code:
20210129 143143 worker: ALSA cards: (0:DAC | 1:empty | 2:empty | 3:empty
20210129 143143 worker: Configured: (0:Audiophonics ES9028/9038 DAC | mixer:(Digital) | alsavol:0)


Miixer is Digital for me, for you it's HDMI in the last line.
Reply
#13
Thanks @TookaFace, you save me the effort of testing this :-)

The mixer name discrepancy is an oddity in how devices are logged in 701. His log does show the line below which is correct for that DAC

20210215 164850 worker: ALSA mixer actual (Digital)
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#14
Ok, for some unknown reasons, volume can be muted when u changing the volume, its rare, but can happen in my case, you just have to change volume again to unmute, so beside that, i would follow @the_bertrum advises, and maybe try to set hardware volume.
Reply
#15
Very odd. If it happens again post output from the cmd below.

Code:
mpc volume

/var/www/command/util.sh get-alsavol Digital
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#16
Code:
20210215 162807 worker: -- Start
20210215 162807 worker: Successfully daemonized
20210215 162807 worker: Integrity check (passed)
20210215 162808 worker: File check (OK)
20210215 162808 worker: Session loaded
20210215 162808 worker: Debug logging (OFF)
20210215 162808 worker: -- Device
20210215 162808 worker: ALSA cards: (0:DAC | 1:empty | 2:empty | 3:empty
20210215 162808 worker: Configured: (0:Audiophonics ES9028/9038 DAC | mixer:(Digital) | alsavol:0)
20210215 162808 worker: ALSA mixer actual (Digital)
20210215 162808 worker: ALSA Digital volume set to (0%)
20210215 162808 worker: -- System
20210215 162809 worker: Host     (audiophonics)
20210215 162809 worker: moOde    (7.0.1 2020-12-23)
20210215 162809 worker: RaspiOS  (10.6)
20210215 162809 worker: Kernel   (5.4.77-v7l+ #1371)
20210215 162809 worker: Platform (Pi-4B 4GB v1.1)
20210215 162809 worker: ARM arch (armv7l, 32-bit kernel)
20210215 162809 worker: MPD ver  (0.22.3_p0x3)
20210215 162809 worker: CPU gov  (ondemand)
20210215 162809 worker: USB boot not available
20210215 162809 worker: File system expanded
20210215 162809 worker: HDMI port off
20210215 162809 worker: -- Network
20210215 162809 worker: eth0 exists
20210215 162809 worker: eth0 wait 0 for IP address
20210215 162812 worker: eth0 wait 1 for IP address
20210215 162815 worker: eth0 wait 2 for IP address
20210215 162819 worker: eth0 wait 3 for IP address
20210215 162822 worker: eth0 wait 4 for IP address
20210215 162825 worker: eth0 address not assigned
20210215 162825 worker: wlan0 does not exist
20210215 162825 worker: no active network interface
20210215 162825 worker: -- Audio
20210215 162825 worker: MPD conf updated
20210215 162825 worker: ALSA outputs unmuted
20210215 162825 worker: ALSA card number (0)
20210215 162825 worker: Audio output (Audiophonics ES9028/9038 DAC)
20210215 162825 worker: Audio formats (S16_LE, S32_LE)
20210215 162825 worker: ALSA mixer name (Digital)
20210215 162825 worker: MPD volume control (disabled)
20210215 162825 worker: Hdwr volume controller exists
20210215 162825 worker: Max ALSA volume (100%)
20210215 162825 worker: Reset renderer active flags
20210215 162825 worker: -- MPD
20210215 162825 worker: MPD started
20210215 162826 worker: MPD accepting connections
20210215 162826 worker: Configure MPD outputs
20210215 162826 worker: MPD output 1 ALSA default (on)
20210215 162826 worker: MPD output 2 ALSA crossfeed (off)
20210215 162826 worker: MPD output 3 ALSA parametric eq (off)
20210215 162826 worker: MPD output 4 ALSA graphic eq (off)
20210215 162826 worker: MPD output 5 ALSA polarity inversion (off)
20210215 162826 worker: MPD output 6 ALSA bluetooth (off)
20210215 162826 worker: MPD output 7 HTTP stream (off)
20210215 162826 worker: MPD crossfade (off)
20210215 162826 worker: -- Feature availability
20210215 162826 worker: Source select (available)
20210215 162826 worker: Source select (source: MPD)
20210215 162826 worker: Source select (output: Audiophonics ES9028/9038 DAC)
20210215 162826 worker: Bluetooth (available)
20210215 162826 worker: Airplay renderer (available)
20210215 162826 worker: Spotify renderer (available)
20210215 162826 worker: Squeezelite renderer (available)
20210215 162826 worker: UPnP renderer (available)
20210215 162826 worker: UPnP renderer (started)
20210215 162826 worker: DLNA server (available)
20210215 162826 worker: UPnP browser (available)
20210215 162826 worker: GPIO button handler (available)
20210215 162826 worker: Stream recorder (n/a)
20210215 162826 worker: -- Music sources
20210215 162826 worker: USB sources (none attached)
20210215 163057 worker: NAS and UPnP sources (mountall initiated)
20210215 163057 worker: -- Miscellaneous
20210215 163057 worker: USB volume knob (Off)
20210215 163057 worker: USB auto-mounter (udisks-glue)
20210215 163057 worker: LED0 (Off)
20210215 163057 worker: LED1 (Off)
20210215 163057 worker: Saved MPD vol level (0)
20210215 163057 worker: Preamp volume level (0)
20210215 163057 worker: MPD volume level (0) restored
20210215 163057 worker: ALSA Digital volume (100%)
20210215 163057 worker: Auto-play (Off)
20210215 163057 worker: Maintenance interval (3 hrs)
20210215 163057 worker: Screen saver activation (Never)
20210215 163057 worker: Session permissions (OK)
20210215 163057 worker: Watchdog started
20210215 163057 worker: Ready

My unit works ok too.
Reply
#17
I can repro (not all the time, maybe 3 times for 5 tentative) with this:

Hardware volume to 100
Connect my phone with bluetooth
disconnect bluetooth from my phone after few seconds (mpd is resume to yes, so music is playing after disconnect)
click once to lower the volume on the gui (or even with mpc vol -1), sometimes u have to click twice, or sometimes u have to increase the volume instead
sound is mute, title is still playling as i see it on the gui or with mpc output

Code:
mpc volume
volume: 96%
/var/www/command/util.sh get-alsavol Digital
99%

If i pause and play again, then sound is back on, same if i next or if i change the volume. 
With software volume i can't repro.
It doesnt make a lot of sens Big Grin
I always thought it was related to this DAC, but maybe not, will try to test with other DAC next time.
In any case, it doesnt seems to be a problem related directly to moOde.
Reply
#18
(02-15-2021, 04:17 PM)Tim Curtis Wrote: I don't see anything suspicious in the log. All the audio and device related log entries indicate the DAC was recognized by Linux kernel and is configured correctly.

I have one of these units somewhere. If I get the chance later today I'll boot it up and see if I can repro your issue.

seems to work now! screwed everything together again and removed all additional stuff (IR tft display and so on...). Maybe even good to know for you: Im running now completely on latest and (sometimes) greatest RaspbianOS with Kernel 5.10. The only thing missing is enabling SPI (enabling SPI in parallel leads to a kind of a chainsaw pattern visualizing the output on an oscilloscope), but as you wrote its already an unsupported image now. 

Thanks a lot for caring!
Max
Reply
#19
(02-15-2021, 04:23 PM)the_bertrum Wrote: Just rule out the obvious, you have turned the volume up in the moOde GUI haven't you?
I ask because I spent ages trying to work out why I was getting no sound a while back only to find (after an awfully long time playing with all sorts of settings) that the volume mixer had swapped to software at 0 after I'd been using Bluetooth for a bit...

That was my issue for the first time dealing with mo0de a couple of days ago  Confused but now, i have it in mind Smile
Reply
#20
(02-15-2021, 07:19 PM)grasshopper Wrote:
Code:
20210215 162807 worker: -- Start
20210215 162807 worker: Successfully daemonized
20210215 162807 worker: Integrity check (passed)
20210215 162808 worker: File check (OK)
20210215 162808 worker: Session loaded
20210215 162808 worker: Debug logging (OFF)
20210215 162808 worker: -- Device
20210215 162808 worker: ALSA cards: (0:DAC | 1:empty | 2:empty | 3:empty
20210215 162808 worker: Configured: (0:Audiophonics ES9028/9038 DAC | mixer:(Digital) | alsavol:0)
20210215 162808 worker: ALSA mixer actual (Digital)
20210215 162808 worker: ALSA Digital volume set to (0%)
20210215 162808 worker: -- System
20210215 162809 worker: Host     (audiophonics)
20210215 162809 worker: moOde    (7.0.1 2020-12-23)
20210215 162809 worker: RaspiOS  (10.6)
20210215 162809 worker: Kernel   (5.4.77-v7l+ #1371)
20210215 162809 worker: Platform (Pi-4B 4GB v1.1)
20210215 162809 worker: ARM arch (armv7l, 32-bit kernel)
20210215 162809 worker: MPD ver  (0.22.3_p0x3)
20210215 162809 worker: CPU gov  (ondemand)
20210215 162809 worker: USB boot not available
20210215 162809 worker: File system expanded
20210215 162809 worker: HDMI port off
20210215 162809 worker: -- Network
20210215 162809 worker: eth0 exists
20210215 162809 worker: eth0 wait 0 for IP address
20210215 162812 worker: eth0 wait 1 for IP address
20210215 162815 worker: eth0 wait 2 for IP address
20210215 162819 worker: eth0 wait 3 for IP address
20210215 162822 worker: eth0 wait 4 for IP address
20210215 162825 worker: eth0 address not assigned
20210215 162825 worker: wlan0 does not exist
20210215 162825 worker: no active network interface
20210215 162825 worker: -- Audio
20210215 162825 worker: MPD conf updated
20210215 162825 worker: ALSA outputs unmuted
20210215 162825 worker: ALSA card number (0)
20210215 162825 worker: Audio output (Audiophonics ES9028/9038 DAC)
20210215 162825 worker: Audio formats (S16_LE, S32_LE)
20210215 162825 worker: ALSA mixer name (Digital)
20210215 162825 worker: MPD volume control (disabled)
20210215 162825 worker: Hdwr volume controller exists
20210215 162825 worker: Max ALSA volume (100%)
20210215 162825 worker: Reset renderer active flags
20210215 162825 worker: -- MPD
20210215 162825 worker: MPD started
20210215 162826 worker: MPD accepting connections
20210215 162826 worker: Configure MPD outputs
20210215 162826 worker: MPD output 1 ALSA default (on)
20210215 162826 worker: MPD output 2 ALSA crossfeed (off)
20210215 162826 worker: MPD output 3 ALSA parametric eq (off)
20210215 162826 worker: MPD output 4 ALSA graphic eq (off)
20210215 162826 worker: MPD output 5 ALSA polarity inversion (off)
20210215 162826 worker: MPD output 6 ALSA bluetooth (off)
20210215 162826 worker: MPD output 7 HTTP stream (off)
20210215 162826 worker: MPD crossfade (off)
20210215 162826 worker: -- Feature availability
20210215 162826 worker: Source select (available)
20210215 162826 worker: Source select (source: MPD)
20210215 162826 worker: Source select (output: Audiophonics ES9028/9038 DAC)
20210215 162826 worker: Bluetooth (available)
20210215 162826 worker: Airplay renderer (available)
20210215 162826 worker: Spotify renderer (available)
20210215 162826 worker: Squeezelite renderer (available)
20210215 162826 worker: UPnP renderer (available)
20210215 162826 worker: UPnP renderer (started)
20210215 162826 worker: DLNA server (available)
20210215 162826 worker: UPnP browser (available)
20210215 162826 worker: GPIO button handler (available)
20210215 162826 worker: Stream recorder (n/a)
20210215 162826 worker: -- Music sources
20210215 162826 worker: USB sources (none attached)
20210215 163057 worker: NAS and UPnP sources (mountall initiated)
20210215 163057 worker: -- Miscellaneous
20210215 163057 worker: USB volume knob (Off)
20210215 163057 worker: USB auto-mounter (udisks-glue)
20210215 163057 worker: LED0 (Off)
20210215 163057 worker: LED1 (Off)
20210215 163057 worker: Saved MPD vol level (0)
20210215 163057 worker: Preamp volume level (0)
20210215 163057 worker: MPD volume level (0) restored
20210215 163057 worker: ALSA Digital volume (100%)
20210215 163057 worker: Auto-play (Off)
20210215 163057 worker: Maintenance interval (3 hrs)
20210215 163057 worker: Screen saver activation (Never)
20210215 163057 worker: Session permissions (OK)
20210215 163057 worker: Watchdog started
20210215 163057 worker: Ready

My unit works ok too.
Did you setup the SPI (OLED) as well? As my setup seems to interfere if I enable spi=on in configt.txt
Reply


Forum Jump: