Thank you for your donation!


Problem: My Moode can't shutdown , reboot and config ...
#1
Hi everyone 
I install Moode 4.2 , after turning on moode i can reboot , shutdown , config... but then
i can't shutdown , reboot and config ... 

My system: Rpi 3B , 3B+ , hifiberry dac +

Help me!
Reply
#2
Post moode log or complete System info.
Reply
#3
My system info


Attached Files Thumbnail(s)
                   
Reply
#4
Please post the text output from System info.
Reply
#5
(09-16-2018, 02:55 PM)Tim Curtis Wrote: Please post the text output from System info.

Oke Tim. 

My system info:
Code:
m
Configure
Sources
Audio
Network
System
Audio info
System info
About
Refresh
Restart
Radio
Music
Playback
System Config
CHECK FORsoftware update
DOWNLOADimage builder
The image builder is an automated process for creating the wonderful custom Linux OS that runs moOde audio player. The builder script is downloaded to the directory /home/pi. The built in SSH terminal can be used to start the script by entering the command sudo ./mosbuild.sh. A spare USB or USB-SDCard drive is needed for the new OS.
General

Timezone
America/Detroit   SET
Host name

moode
 SET
Length 3-63 chars, alphanumeric and hyphen allowed.
Keyboard layout
us   SET
Browser title

moOde Player
 SET
System Modifications

CPU governor
Performance   SET
Integrated WiFi adapter
ON
OFF
 SET
Integrated BT adapter
ON
OFF
 SET
HDMI port
ON
OFF
 SET
Wait for eth0 address
ON
OFF
 SET
CAUTION: Only turn this OFF if running a WiFi-only configuration.
Leave this setting ON if connected via Ethernet cable.
USB (UAC2) fix
ON
OFF
 SET
File system
EXPAND
File system has been expanded
USB boot
ENABLE
USB boot is not enabled yet
MPD engine timeout
Never   SET
Local Display

Local UI display
ON
OFF
 SET
Touch screen
YES
NO
 SET
Screen blank
10 Mins   SET
Brightness

255
 SET
Rotate screen
0 Deg   SET
Browser cache
CLEAR  Local Services

Metadata file
ON
OFF
 SET
LCD update engine
ON
OFF
 
Python script
 SET
Provide full path to Python script.
SSH term server
ON
OFF
 SET
OPEN Web SSH terminal.
Maintenance

Playback history
CLEAR
System logs
CLEAR
Clear various system log files. NOTE: The logs are cleared periodically by the automatic Maintenance task.
Sqlite database
COMPACT
Debug logging
ON
OFF
 SET
×
System Information
            
      S Y S T E M    P A R A M E T E R S  

    Date and time    = 2018-09-16 11:51:42
    System uptime    = up 7 minutes
    Timezone    = America/Detroit
    moOde        = Release 4.2 2018-07-11

    Host name    = moode
    ETH0  IP    = 192.168.1.34
    ETH0  MAC    = b8:27:eb:92:a8:f9
    WLAN0 IP    = unassigned
    WLAN0 MAC    = b8:27:eb:c7:fd:ac
    WiFi country    = US

    HDWR REV    = Pi-3B 1GB v1.2
    SoC         = BCM2835
    CORES        = 4
    ARCH        = armv7l
    RASPBIAN    = 9.4
    KERNEL        = 4.14.54-v7+
    KTIMER FREQ    = 100 Hz
    USB BOOT    = not enabled
    Warranty    = OK

    ROOT size    = 7.3G
    ROOT used     = 26%
    ROOT avail    = 5.2G
    FS expand    = expanded
    MEM free     = 534 MB
    MEM used     = 53 MB
    Temperature     = 51.5°C

    CPU GOV        = performance
    MPD SCHDPOL    = TS
    P3-WIFI        = On
    P3-BT        = On
    HDMI        = On
    ETH0 CHECK    = On
    MAX USB CUR    = Off
    UAC2 FIX    = Off
    SSH server    = On

    LED0        = on
    LED1        = on

      C O R E    S E R V E R S  

    PHP-FPM        = 7.0.30
    NGINX        = 1.10.3
    SQLite        = 3.16.2

      C P U    L O A D  

    CPU    %usr    %sys    %idle
    all    0.75    0.00    99.25
    0    3.00    0.00    97.00
    1    0.00    0.00    100.00
    2    0.00    0.00    100.00
    3    0.00    0.00    100.00

      P R O C E S S    L O A D  

    PRI RTPRIO COMMAND         %MEM PSR %CPU
     19      - sysinfo.sh       0.2   2  1.3
     19      - php-fpm7.0       0.9   0  0.7
     19      - systemd          0.6   3  0.6
     19      - php-fpm7.0       1.0   0  0.6
     19      - php-fpm7.0       0.9   0  0.5
     19      - sudo             0.3   3  0.3
     19      - mmcqd/0          0.0   1  0.1
     19      - systemd-journal  0.4   2  0.1
     19      - systemd-udevd    0.3   1  0.1

      C L O C K    F R E Q U E N C I E S  

        arm   = 1200 MHz           pwm   = 0 MHz
        core  = 400 MHz               emmc  = 200 MHz
        h264  = 300 MHz               pixel = 25 MHz
        isp   = 300 MHz               vec   = 0 MHz
        v3d   = 300 MHz               hdmi  = 163 MHz
        uart  = 48 MHz               dpi   = 0 MHz

    SD card    = 50 MHz

      S Y S T E M    V O L T A G E S  

    core            = 1.2813V
    sdram controller    = 1.2000V
    sdram I/O        = 1.2000V
    sdram chip        = 1.2250V

      U I  C U S T O M I Z A T I O N S  

    Theme            = Nightshade
    Accent color        = Alizarin
    Alpha blend        = 1.0
    Adaptive background    = No
    Background image    = No
    Playback history    = No
    Extra metadata        = Yes
    Library            = Artist

      A U D I O    P A R A M E T E R S  

    Audio device        = HiFiBerry DAC+ Pro
    Interface        = I2S
    Hdwr volume        = Controller detected
    Mixer name        = Digital
    Output stream        = Closed
    ALSA version        = 1.1.3-5+rpi3
    SoX version        = 0.1.2-2

    Volume knob        = 0
    Volume mute        = Unmuted

    Bluetooth controller    = Off
    Airplay receiver    = On
    Squeezelite        = Off
    UPnP client        = Off
    DLNA server        = Off

    Rotary encoder        = Off
    Encoder params        = 100 2 3 4 5
    Crossfeed        = Off
    Parametric EQ        = Off
    Graphic EQ        = Off
    Auto-shuffle        = Off
    Autoplay        = Off
    MPD crossfade        = Off

      M P D    S E T T I N G S  

    Version            = 0.20.20
    Volume control        = hardware
    ALSA device        = hw:0
    SoX resampling        = disabled
    SoX quality        = very high
    SoX multithreading    = off
    Audio buffer (kb)    = 4096
    Buffer before play    = 10%
    Output buffer size (kb)    = 81920
    Volume normalization    = no
    DSD over PCM (DoP)    = yes
    Replay gain        = off

      B L U E T O O T H    S E T T I N G S  

    Bluetooth ver        = 5.49
    Bluealsa ver        = Turn BT on for version info
    Speaker sharing        = No
    Resume MPD        = No

      A I R P L A Y    S E T T I N G S  

    Version            = 3.1.7
    Friendly name        = Moode Airplay
    ALSA device        = hw:0
    Volume mixer        = auto
    Resume MPD        = No
    Output bit depth    = S16
    Output sample rate    = 44100
    Session interruption    = no
    Session timeout (ms)    = 120
    Audio buffer (secs)    = 0.0

      S Q U E E Z E L I T E    S E T T I N G S  

    Version            = 1.8.7-1052 "DSD/SRC enabled"
    Friendly name        = Moode
    ALSA device        = hw:0
    ALSA params        = 80:4::1
    Output buffers        = 40000:100000
    Task priority        = 45
    Codec list        = flac,pcm,mp3,ogg,aac,alac,dsd
    Resume MPD        = No
    Other options        = -W -D 500 -R E -S /var/loca

      M O O D E    L O G  

   20180916 095931 worker: - Start
   20180916 095931 worker: Successfully daemonized
   20180916 095931 worker: Session loaded
   20180916 095931 worker: Debug logging (off)
   20180916 095931 worker: - Platform
   20180916 095932 worker: Host (moode)
   20180916 095932 worker: Hdwr (Pi-3B 1GB v1.2)
   20180916 095932 worker: Arch (armv7l)
   20180916 095932 worker: Rasp (9.4)
   20180916 095932 worker: Kver (4.14.54-v7+)
   20180916 095932 worker: Ktyp (Standard)
   20180916 095932 worker: Gov  (performance)
   20180916 095932 worker: Rel  (Moode 4.2 2018-07-11)
   20180916 095932 worker: Upd  (2018-07-18)
   20180916 095932 worker: MPD  (0.20.20)
   20180916 095933 worker: USB boot not enabled yet
   20180916 095933 worker: File system expanded
   20180916 095933 worker: HDMI port on
   20180916 095933 worker: File check ok
   20180916 095933 worker: - Network
   20180916 095933 worker: eth0 exists
   20180916 095933 worker: eth0 (192.168.1.34)
   20180916 095933 worker: wlan0 exists
   20180916 095933 worker: wifi country (US)
   20180916 095933 worker: wlan0 SSID is blank
   20180916 095933 worker: eth0 addr exists, AP mode not started
   20180916 095933 worker: wlan0 address not assigned
   20180916 095933 worker: - Audio
   20180916 095933 worker: ALSA outputs unmuted
   20180916 095933 worker: ALSA card number (0)
   20180916 095933 worker: Audio out (I2S audio device)
   20180916 095933 worker: Audio dev (HiFiBerry DAC+ Pro)
   20180916 095934 worker: ALSA mixer name (Digital)
   20180916 095934 worker: MPD volume control (hardware)
   20180916 095935 worker: Hdwr volume controller exists
   20180916 095935 worker: Chip options (Burr Brown PCM5122)
   20180916 095935 worker: - Services
   20180916 095935 worker: Reset renderer active
   20180916 095937 worker: MPD started
   20180916 095937 worker: MPD scheduler policy (time-share)
   20180916 095937 worker: Configure MPD outputs
   20180916 095937 worker: MPD output 1 ALSA default (on)
   20180916 095937 worker: MPD output 2 ALSA crossfeed (off)
   20180916 095937 worker: MPD output 3 ALSA parametric eq (off)
   20180916 095937 worker: MPD output 4 ALSA graphic eq (off)
   20180916 095937 worker: MPD output 5 ALSA bluetooth (off)
   20180916 095937 worker: MPD crossfade (off)
   20180916 095937 worker: Airplay receiver started
   20180916 095937 worker: Airplay volume mgt (auto)
   20180916 095937 worker: - Music sources
   20180916 095937 worker: USB sources (none attached)
   20180916 095937 worker: NAS sources (none configured)
   20180916 095937 worker: - Miscellaneous
   20180916 095937 worker: Volume level (0) restored
   20180916 095937 worker: Maintenance interval (21600)
   20180916 095937 worker: Screen saver timeout (Never)
   20180916 095937 worker: Watchdog started
   20180916 095937 worker: Ready




        
Close
Reply
#6
I don't see anything unusual in the log.

When you experience the issue try and determine whether worker.php is running. If its not running it would suggest some sort of breakage in your build or something external to moOde software like a bad sd card, etc.

pgrep -l worker.php

The output should look like below

pi@rp3:~ $ pgrep -l worker.php
622 worker.php
Reply
#7
(09-16-2018, 04:23 PM)Tim Curtis Wrote: I don't see anything unusual in the log.  

...
Oke Tim .

I will try again and report to you. Many thank.
Reply


Forum Jump: