[SOLVED] Wifi GUI not working on 4.3.

[energyi]

Was waiting to see if anyone posted problems with music GUI wifi on version 4.3. Does anyone have suggestions?

No problems with Ethernet direct-wired connection, but over wifi music screens are basically blank (attachment). Configure still mostly works. Coming from 4.1 everything still works fine on Suptronics x5000 (rpi3) and x400 (rpi2, tried Hifi DAC+ per previous x400 discussion but didn't fix).

   

Code:

System Information


S Y S T E M    P A R A M E T E R S  

Date and time = 2018-10-04 09:54:24
System uptime = up 16 hours, 46 minutes
Timezone = America/Denver
moOde = Release 4.3 2018-09-27

Host name = moode
ETH0  IP = unassigned
ETH0  MAC = b8:27:eb:4c:e9:e8
WLAN0 IP = 192.168.0.13
WLAN0 MAC = 00:08:54:8c:cf:92
WiFi country = US

HDWR REV = Pi-2B 1GB v1.1
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.4
KERNEL = 4.14.72-v7+
KTIMER FREQ = 100 Hz
USB BOOT = not available
Warranty = OK

ROOT size = 2.9G
ROOT used = 73%
ROOT avail = 766M
FS expand = not expanded
MEM free = 631 MB
MEM used = 53 MB
Temperature = 51.9°C

CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = None
P3-BT = None
HDMI = On
ETH0 CHECK = On
MAX USB CUR = On
UAC2 FIX = On
SSH server = Off

LED0 = on
LED1 = on

C O R E    S E R V E R S  

PHP-FPM = 7.0.30
NGINX = 1.10.3
SQLite = 3.16.2

C P U    L O A D  

CPU %usr %sys %idle
all 0.13 0.38 99.50
0 0.51 0.00 99.49
1 0.00 1.49 98.51
2 0.00 0.00 100.00
3 0.00 0.00 100.00

P R O C E S S    L O A D  

PRI RTPRIO COMMAND         %MEM PSR %CPU
19      - sysinfo.sh       0.2   2  3.0
19      - sudo             0.3   0  0.6
19      - worker.php       1.2   2  0.3
19      - kworker/u8:2     0.0   0  0.2
19      - kworker/u8:3     0.0   2  0.1
19      - kworker/u8:0     0.0   1  0.1
19      - systemd          0.6   2  0.0
19      - kthreadd         0.0   2  0.0
39      - kworker/0:0H     0.0   0  0.0

C L O C K    F R E Q U E N C I E S  

   arm   = 900 MHz       pwm   = 0 MHz
   core  = 250 MHz       emmc  = 200 MHz
   h264  = 250 MHz       pixel = 25 MHz
   isp   = 250 MHz       vec   = 126 MHz
   v3d   = 250 MHz       hdmi  = 163 MHz
   uart  = 47 MHz       dpi   = 0 MHz

SD card = 50 MHz

S Y S T E M    V O L T A G E S  

core = 1.3125V
sdram controller = 1.2000V
sdram I/O = 1.2000V
sdram chip = 1.2250V

U I  C U S T O M I Z A T I O N S  

Theme = Standard
Accent color = Emerald
Alpha blend = 1.0
Adaptive background = No
Background image = No
Playback history = No
Extra metadata = Yes
Artist list order = Artist
Cover search pri = Embedded cover
Hi-res covers = No
Pixel ratio = 1

A U D I O    P A R A M E T E R S  

Audio device = HIFI DAC+
Interface = I2S
Hdwr volume = Controller detected
Mixer name = Digital
Output stream = Closed
ALSA version = 1.1.3-5+rpi3
SoX version = 0.1.2-2

Volume knob = 0
Volume mute = Unmuted

Bluetooth controller = Off
Airplay receiver = Off
Spotify receiver = 0
Squeezelite = Off
UPnP client = Off
DLNA server = Off

Rotary encoder = Off
Encoder params = 100 2 3 4 5
Crossfeed = Off
Parametric EQ = Off
Graphic EQ = Off
Auto-shuffle = Off
Autoplay = Off
MPD crossfade = Off

M P D    S E T T I N G S  

Version = 0.20.20
Volume control = software
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
Audio buffer (kb) = 4096
Buffer before play = 10%
Output buffer size (kb) = 81920
Volume normalization = No
DSD over PCM (DoP) = no
Replay gain = off

B L U E T O O T H    S E T T I N G S  

Bluetooth ver = 5.49
Bluealsa ver = Turn BT on for version info
Speaker sharing = No
Resume MPD = No

A I R P L A Y    S E T T I N G S  

Version = 3.2.1
Friendly name = Moode Airplay
ALSA device = hw:0
Volume mixer = auto
Resume MPD = No
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout (ms) = 120
Audio buffer (secs) = 0.0

S P O T I F Y    S E T T I N G S  

Friendly name = Moode Spotify
ALSA device = default:CARD=IQaudIODAC
Resume MPD = No
Bit rate = 160
Initial volume = 0
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0

S Q U E E Z E L I T E    S E T T I N G S  

Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Resume MPD = No
Other options = -W -D 500 -R E -S /var/loca

M O O D E    L O G  

  20180930 211206 worker: - Start
  20180930 211206 worker: Successfully daemonized
  20180930 211207 worker: Session loaded
  20180930 211207 worker: Debug logging (off)
  20180930 211207 worker: - Platform
  20180930 211209 worker: Host (moode)
  20180930 211209 worker: Hdwr (Pi-2B 1GB v1.1)
  20180930 211209 worker: Arch (armv7l)
  20180930 211209 worker: Rasp (9.4)
  20180930 211209 worker: Kver (4.14.72-v7+)
  20180930 211209 worker: Ktyp (Standard)
  20180930 211209 worker: Gov  (performance)
  20180930 211209 worker: Rel  (Moode 4.3 2018-09-27)
  20180930 211209 worker: Upd  (None)
  20180930 211209 worker: MPD  (0.20.20)
  20180930 211209 worker: USB boot not enabled yet
  20181003 190836 worker: File system not expanded yet
  20181003 190837 worker: HDMI port on
  20181003 190837 worker: File check ok
  20181003 190837 worker: - Network
  20181003 190837 worker: eth0 exists
  20181003 190837 worker: eth0 wait 0 for IP address
  20181003 190840 worker: eth0 wait 1 for IP address
  20181003 190843 worker: eth0 wait 2 for IP address
  20181003 190847 worker: eth0 wait 3 for IP address
  20181003 190850 worker: eth0 wait 4 for IP address
  20181003 190853 worker: eth0 wait 5 for IP address
  20181003 190856 worker: eth0 wait 6 for IP address
  20181003 190859 worker: eth0 wait 7 for IP address
  20181003 190902 worker: eth0 wait 8 for IP address
  20181003 190905 worker: eth0 wait 9 for IP address
  20181003 190908 worker: eth0 address not assigned
  20181003 190908 worker: wlan0 exists
  20181003 190908 worker: wifi country (US)
  20181003 190908 worker: wlan0 trying SSID (McCabe)
  20181003 190908 worker: wlan0 (192.168.0.13)
  20181003 190908 worker: - Audio
  20181003 190909 worker: ALSA outputs unmuted
  20181003 190909 worker: ALSA card number (0)
  20181003 190909 worker: Audio out (I2S audio device)
  20181003 190909 worker: Audio dev (Suptronics x400)
  20181003 190909 worker: ALSA mixer name (Digital)
  20181003 190909 worker: MPD volume control (software)
  20181003 190909 worker: Hdwr volume controller exists
  20181003 190909 worker: Chip options (Burr Brown PCM5122)
  20181003 190909 worker: - Services
  20181003 190909 worker: Reset renderer active
  20181003 190911 worker: MPD started
  20181003 190911 worker: MPD scheduler policy (time-share)
  20181003 190911 worker: Configure MPD outputs
  20181003 190911 worker: MPD output 1 ALSA default (on)
  20181003 190911 worker: MPD output 2 ALSA crossfeed (off)
  20181003 190911 worker: MPD output 3 ALSA parametric eq (off)
  20181003 190911 worker: MPD output 4 ALSA graphic eq (off)
  20181003 190911 worker: MPD output 5 ALSA bluetooth (off)
  20181003 190911 worker: MPD crossfade (off)
  20181003 190911 worker: - Music sources
  20181003 190911 worker: USB source (E71A-026D)
  20181003 190911 worker: NAS sources (none configured)
  20181003 190911 worker: - Miscellaneous
  20181003 190911 worker: Volume level (0) restored
  20181003 190911 worker: Maintenance interval (21600)
  20181003 190911 worker: Screen saver activation (Never)
  20181003 190911 worker: Watchdog started
  20181003 190911 worker: Ready
  20181003 191048 worker: Job timezone
  20181003 191112 worker: Job hdmiport
  20181003 191130 worker: Job maxusbcurrent
  20181003 191142 worker: Job uac2fix
  20181003 191234 worker: Job clearbrcache
  20181003 192002 worker: Job i2sdevice
  20181004 011033 worker: Maintenance completed
  20181004 071155 worker: Maintenance completed
  20181004 114800 worker: Job rescanmpddb
  20181004 114809 worker: Job regenthmcache
  20181004 094809 thmcache: Start
  20181004 094816 thmcache: Done: 22 album dirs processed
  20181004 115206 waitWorker(): Start (sys-config, w_active=0)
  20181004 115206 waitWorker(): End   (sys-config, w_active=0)
  20181004 115417 waitWorker(): Start (sys-config, w_active=0)
  20181004 115417 waitWorker(): End   (sys-config, w_active=0)

[Tim Curtis]

Hi,

I took the liberty of placing the System info log output into a Code block to make it easier to read.

As far as the attached image goes, I'm seeing what looks like an outdated UI based on the bottom tab bar being the three solid blocks. Looks like a stale or corrupt Browser cache on the device.

-Tim

[blarg]

had the same problem - works on Ethernet, doesn't work on WiFi on static IP?

what I did:

1) clear browser cache (probably not necessary, but I did it)
2) set wifi to DHCP.  do not make a reservation to put it on the same IP address as you want for the static IP.  Just let DHCP assign one.
3) disconnect Ethernet and power cycle
4) connect to the "new" IP address and see if it works.
5) if it works, change wifi to static IP address and reboot

I had this problem with 4.2 and 4.3.  finally found a work-around.  mine's been working since I did this.

[energyi]

All I had to do was clear the browser cache and it is now working. Thanks!

[Tim Curtis]

Nice :-)

My headstone will read "Clear Browser Cache" ;-)