10-07-2018, 06:37 PM
Thats just the top part of System info. You have to highlight and drag the mouse down until all the output is highlighted then copy/paste
Thank you for your donation!
Update 4.2 to 4.3 Questions
|
10-07-2018, 06:37 PM
Thats just the top part of System info. You have to highlight and drag the mouse down until all the output is highlighted then copy/paste
10-07-2018, 07:08 PM
10-07-2018, 08:20 PM
(This post was last modified: 10-08-2018, 03:29 PM by Tim Curtis.
Edit Reason: Placed log output in a code block
)
Here you go, Tim:
Code: ROOT size = 2.9G
10-07-2018, 09:17 PM
The line below suggests that Linux has not registered the audio device.
Code: cat: /proc/asound/card0/pcm0p/sub0/hw_params: No such file or directory Maybe try re-seating it or spraying a bit of contact cleaner on the 40-pin header, siomething like that. -Tim
10-07-2018, 11:03 PM
Code: Audio device = HiFiBerry DAC+ Is this the correct driver for your device? Collybia recommend using the Mamboberry driver: "From the settings page at Archphile OR MoOde player, you should simply choose from the list of DAC’s, the Mamboberry HiFi DAC+."
10-08-2018, 02:03 AM
10-08-2018, 02:14 AM
Took the thing all apart and sprayed some contact cleaner in the header sockets, wiggled it in and out a few times, reassembled.
Started up, re-selected the dac, rebooted. No love. Still getting the "No such file or directory" message in the system info. Funny thing is, it worked perfectly for more than a year before with 3x and yesterday with 4.2. I'll double-check the power connection to the board, but other than that I'm completely stumped.
10-08-2018, 02:48 AM
Thats very odd.
After setting the I2S driver to Mamboberry HIFI DAC and then rebooting, did u remember to open MPD config and APPLY the settings? Basically if /boot/config.txt has the line dtoverlay=hifiberry-dac which is the correct I2S driver for that Mamboberry board then Linux should register it and assign it to card 0 (hw:0). A successful device registration would show in the output of the dmesg command. Feel free to post the output of dmesg and I'll have a look. -Tim
10-08-2018, 02:08 PM
OK, wow, so not obvious. So did this just now, with no result.
You need to know I'm a part of your user base who is just a guy who wants a music player and has zero experience with Linux or anything command-line oriented. So all of this is very opaque to me. I'm guessing the the "output of dmesg" involves ssh-ing in and typing in that line? Please confirm and add anything else I need to know and I'll give it a whack.
10-08-2018, 03:28 PM
moOde and Raspberry Pi is a great way to learn some Linux :-)
Yes, you would type the cmd dmesg at the SSH prompt. Open moOde System config screen and scroll down to Local Services. Turn on the SSH term server and then OPEN it. The userid is Pi and password is moodeaudio. |
« Next Oldest | Next Newest »
|