Posts: 12
Threads: 6
Joined: Nov 2018
Reputation:
0
11-07-2018, 06:50 PM
(This post was last modified: 11-07-2018, 06:52 PM by gibman.)
Just installed a completely fresh image of Moode on a pie 2 box.
Enabled spotify.
Enabled logs.
spotify does not seem to run.
according to : pgrep -l librespot
no process is listed.
I then manually tried to start it myself
/usr/local/bin/librespot
it responds with:
Illegal instruction
do I have to compile my own version ?
also where do I put my API keys as I am used to from other spotify implementations ?
surely it has to know about my account ??
logs attached
Posts: 12
Threads: 6
Joined: Nov 2018
Reputation:
0
11-07-2018, 06:51 PM
(This post was last modified: 11-12-2018, 12:16 PM by Tim Curtis.
Edit Reason: placed log output in code box
)
seems I was unable to attach either .txt / .zip files.,. so instead here is the log in plain view
Code: "worker busy"
m
Radio
Music
Playback
Audio Config
Devices
I2S audio device
HIFI Digi+ SET
Set this to None if using a USB audio device.
Auto-play will be turned off as part of updating this setting.
Driver options
None available SET
Chip/Device options
EDIT SETTINGS
ALSA volume (%)
Hardware volume controller not detected
MPD
MPD options
EDIT SETTINGS
RESTART MPD service
Rotary encoder
ON
OFF
100 2 3 4 5
SET
Auto-shuffle
ON
OFF
SET
Autoplay after start
ON
OFF
SET
Crossfade (secs)
0
SET
Crossfeed
Off SET
Parametric EQ
Off SET
CONFIGURE EQ curve
Graphic EQ
Off SET
CONFIGURE EQ curve
Renderers
Bluetooth
ON
OFF
Moode Bluetooth
SET Speaker sharing
ON
OFF
SET Resume MPD
No SET
CONFIGURE Bluetooth
RESTART Bluetooth
Airplay
ON
OFF
Kitchen
SET Resume MPD
No SET
CONFIGURE Airplay
RESTART Airplay
Spotify
ON
OFF
Kitchen
SET Resume MPD
No SET
CONFIGURE Spotify
RESTART Spotify
Squeezelite
ON
OFF
SET Resume MPD
No SET
CONFIGURE Squeezelite
RESTART Squeezelite
UPnP/DLNA
UPnP Client for MPD
ON
OFF
Kitchen
SET
CONFIGURE UPnP
RESTART UPnP
DLNA server
ON
OFF
Moode DLNA
SET
REBUILD Database
VIEW Status of db update
Services
Audio scrobbler
ON
OFF
gibman.dk
SET
••••••••••••
×
System Information
S Y S T E M P A R A M E T E R S
Date and time = 2018-11-07 19:37:31
System uptime = up 51 minutes
Timezone = Europe/Copenhagen
moOde = Release 4.3 2018-09-27
Host name = kitchen
ETH0 IP = unassigned
ETH0 MAC = b8:27:eb:7e:06:72
WLAN0 IP = 192.168.1.125
WLAN0 MAC = 14:d6:4d:48:b3:e3
WiFi country = US
HDWR REV = Pi-1B+ 512MB
SoC = BCM2835
CORES = 1
ARCH = armv6l
RASPBIAN = 9.4
KERNEL = 4.14.76+
KTIMER FREQ = 100 Hz
USB BOOT = not available
Warranty = OK
ROOT size = 7.3G
ROOT used = 28%
ROOT avail = 5.1G
FS expand = expanded
MEM free = 163 MB
MEM used = 57 MB
Temperature = 36.9°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = None
P3-BT = None
HDMI = Off
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = Off
ETHPORT FIX = Off
SSH server = On
LED0 = on
LED1 = on
C O R E S E R V E R S
PHP-FPM = 7.0.30
NGINX = 1.10.3
SQLite = 3.16.2
C P U L O A D
CPU %usr %sys %idle
all 2.06 1.03 96.39
0 2.06 1.03 96.39
P R O C E S S L O A D
PRI RTPRIO COMMAND %MEM PSR %CPU
19 - sysinfo.sh 0.5 0 4.0
19 - worker.php 2.7 0 1.3
19 - sudo 0.6 0 1.0
29 - mpd 4.6 0 0.3
19 - upmpdcli 1.8 0 0.3
19 - systemd 1.3 0 0.2
19 - kworker/u2:5 0.0 0 0.2
19 - kworker/u2:2 0.0 0 0.2
19 - php-fpm7.0 1.8 0 0.2
C L O C K F R E Q U E N C I E S
arm = 700 MHz pwm = 0 MHz
core = 250 MHz emmc = 200 MHz
h264 = 250 MHz pixel = 0 MHz
isp = 250 MHz vec = 0 MHz
v3d = 250 MHz hdmi = 163 MHz
uart = 47 MHz dpi = 0 MHz
SD card = 50 MHz
S Y S T E M V O L T A G E S
core = 1.2000V
sdram controller = 1.2000V
sdram I/O = 1.2000V
sdram chip = 1.2250V
U I C U S T O M I Z A T I O N S
Theme = Standard
Accent color = Alizarin
Alpha blend = 1.0
Adaptive background = No
Background image = No
Playback history = No
Extra metadata = Yes
Artist list order = Artist
Cover search pri = Embedded cover
Hi-res covers = No
Pixel ratio = 1
Cover backdrop = No
Cover blur = 20px
Cover scale = 1.25
A U D I O P A R A M E T E R S
Audio device = HIFI Digi+
Interface = I2S
Hdwr volume = None
Mixer name = Digital
Output stream = Closed
ALSA version = 1.1.3-5+rpi3
SoX version = 0.1.2-2
Volume knob = 0
Volume mute = Unmuted
Bluetooth controller = Off
Airplay receiver = On
Spotify receiver = On
Squeezelite = Off
UPnP client = On
DLNA server = Off
Rotary encoder = Off
Encoder params = 100 2 3 4 5
Crossfeed = Off
Parametric EQ = Off
Graphic EQ = Off
Auto-shuffle = Off
Autoplay = Off
MPD crossfade = Off
M P D S E T T I N G S
Version = 0.20.20
Volume control = software
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
Audio buffer (kb) = 4096
Buffer before play = 10%
Output buffer size (kb) = 81920
Volume normalization = No
DSD over PCM (DoP) = no
Replay gain = off
B L U E T O O T H S E T T I N G S
Bluetooth ver = 5.49
Bluealsa ver = Turn BT on for version info
Speaker sharing = No
Resume MPD = No
A I R P L A Y S E T T I N G S
Version = 3.2.1
Friendly name = Kitchen
ALSA device = hw:0
Volume mixer = auto
Resume MPD = No
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout (ms) = 120
Audio buffer (secs) = 0.0
S P O T I F Y S E T T I N G S
Friendly name = Kitchen
ALSA device = default:CARD=sndrpihifiberry
Resume MPD = No
Bit rate = 320
Initial volume = 100
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0
S Q U E E Z E L I T E S E T T I N G S
Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Resume MPD = No
Other options = -W -D 500 -R E -S /var/loca
M O O D E L O G
20181107 184607 worker: - Start
20181107 184609 worker: Successfully daemonized
20181107 184609 worker: Integrity check ok
20181107 184612 worker: Session loaded
20181107 184612 worker: Debug logging (off)
20181107 184612 worker: - Platform
20181107 184633 worker: Host (kitchen)
20181107 184633 worker: Hdwr (Pi-1B+ 512MB)
20181107 184633 worker: Arch (armv6l)
20181107 184633 worker: Rasp (9.4)
20181107 184633 worker: Kver (4.14.76+)
20181107 184633 worker: Ktyp (Standard)
20181107 184633 worker: Gov (performance)
20181107 184633 worker: Rel (Moode 4.3 2018-09-27)
20181107 184633 worker: Upd (2018-10-19)
20181107 184633 worker: MPD (0.20.20)
20181107 184633 worker: USB boot not enabled yet
20181107 184633 worker: File system expanded
20181107 184634 worker: HDMI port off
20181107 184635 worker: File check ok
20181107 184635 worker: - Network
20181107 184635 worker: eth0 exists
20181107 184635 worker: eth0 wait 0 for IP address
20181107 184639 worker: eth0 wait 1 for IP address
20181107 184642 worker: eth0 wait 2 for IP address
20181107 184642 command/moode: Connection to MPD failed
20181107 184644 command/moode: Connection to MPD failed
20181107 184645 worker: eth0 wait 3 for IP address
20181107 184646 command/moode: Connection to MPD failed
20181107 184648 command/moode: Connection to MPD failed
20181107 184648 worker: eth0 wait 4 for IP address
20181107 184651 worker: eth0 wait 5 for IP address
20181107 184655 worker: eth0 wait 6 for IP address
20181107 184658 worker: eth0 wait 7 for IP address
20181107 184701 worker: eth0 wait 8 for IP address
20181107 184704 worker: eth0 wait 9 for IP address
20181107 184707 worker: eth0 address not assigned
20181107 184707 worker: wlan0 exists
20181107 184707 worker: wifi country (US)
20181107 184707 worker: wlan0 trying SSID (enkegaard)
20181107 184708 worker: wlan0 (192.168.1.125)
20181107 184708 worker: - Audio
20181107 184709 worker: ALSA outputs unmuted
20181107 184709 worker: ALSA card number (0)
20181107 184709 worker: Audio out (I2S audio device)
20181107 184709 worker: Audio dev (HIFI Digi+)
20181107 184709 worker: ALSA mixer name (Digital)
20181107 184709 worker: MPD volume control (software)
20181107 184709 worker: Hdwr volume controller not detected
20181107 184709 worker: - Services
20181107 184709 worker: Reset renderer active
20181107 184712 worker: MPD started
20181107 184712 worker: MPD scheduler policy (time-share)
20181107 184712 worker: Configure MPD outputs
20181107 184712 worker: MPD output 1 ALSA default (on)
20181107 184712 worker: MPD output 2 ALSA crossfeed (off)
20181107 184712 worker: MPD output 3 ALSA parametric eq (off)
20181107 184712 worker: MPD output 4 ALSA graphic eq (off)
20181107 184712 worker: MPD output 5 ALSA bluetooth (off)
20181107 184712 worker: MPD crossfade (off)
20181107 184712 worker: Airplay receiver started
20181107 184712 worker: Airplay volume mgt (auto)
20181107 184713 worker: Spotify receiver started
20181107 184714 worker: UPnP renderer started
20181107 184715 worker: Shellinabox SSH started
20181107 184715 worker: - Music sources
20181107 184715 worker: USB sources (none attached)
20181107 184715 worker: NAS sources (none configured)
20181107 184715 worker: - Miscellaneous
20181107 184716 worker: Volume level (0) restored
20181107 184716 worker: Maintenance interval (21600)
20181107 184716 worker: Screen saver activation (Never)
20181107 184716 worker: Watchdog started
20181107 184716 worker: Ready
20181107 184927 worker: Job spotifysvc
20181107 192946 waitWorker(): Start (sys-config, w_active=0)
20181107 192946 waitWorker(): End (sys-config, w_active=0)
20181107 192947 engine-mpd: Connect
20181107 192947 engine-mpd: Session loaded
20181107 192947 engine-mpd: Open socket
20181107 192947 readMpdResponse(): reading response
20181107 192947 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181107 192947 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181107 192947 engine-mpd: Get initial status
20181107 192947 readMpdResponse(): reading response
20181107 192947 readMpdResponse(): success $str=(OK)
20181107 192947 readMpdResponse(): success $resp[0]=(volume: 0)
20181107 192947 engine-mpd: UI state=(undefined), MPD state=(stop)
20181107 192947 engine-mpd: Generating enhanced metadata
20181107 192947 readMpdResponse(): reading response
20181107 192947 readMpdResponse(): success $str=(OK)
20181107 192947 readMpdResponse(): success $resp[0]=(OK)
20181107 192947 enhanceMetadata(): File is NULL
20181107 192947 engine-mpd: Metadata returned to client: Size=(25)
20181107 192947 engine-mpd: Connect
20181107 192947 engine-mpd: Session loaded
20181107 192947 engine-mpd: Open socket
20181107 192947 readMpdResponse(): reading response
20181107 192947 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181107 192947 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181107 192947 engine-mpd: Get initial status
20181107 192947 readMpdResponse(): reading response
20181107 192947 readMpdResponse(): success $str=(OK)
20181107 192947 readMpdResponse(): success $resp[0]=(volume: 0)
20181107 192947 engine-mpd: UI state=(stop), MPD state=(stop)
20181107 192947 engine-mpd: Idle
20181107 192947 engine-mpd: Wait for idle timeout
20181107 192947 readMpdResponse(): reading response
20181107 192959 waitWorker(): Start (snd-config, w_active=0)
20181107 192959 waitWorker(): End (snd-config, w_active=0)
20181107 193001 engine-mpd: Connect
20181107 193001 engine-mpd: Session loaded
20181107 193001 engine-mpd: Open socket
20181107 193001 readMpdResponse(): reading response
20181107 193001 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181107 193001 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181107 193001 engine-mpd: Get initial status
20181107 193001 readMpdResponse(): reading response
20181107 193001 readMpdResponse(): success $str=(OK)
20181107 193001 readMpdResponse(): success $resp[0]=(volume: 0)
20181107 193001 engine-mpd: UI state=(undefined), MPD state=(stop)
20181107 193001 engine-mpd: Generating enhanced metadata
20181107 193001 readMpdResponse(): reading response
20181107 193001 readMpdResponse(): success $str=(OK)
20181107 193001 readMpdResponse(): success $resp[0]=(OK)
20181107 193001 enhanceMetadata(): File is NULL
20181107 193001 engine-mpd: Metadata returned to client: Size=(25)
20181107 193001 engine-mpd: Connect
20181107 193001 engine-mpd: Session loaded
20181107 193001 engine-mpd: Open socket
20181107 193001 readMpdResponse(): reading response
20181107 193001 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181107 193001 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181107 193001 engine-mpd: Get initial status
20181107 193001 readMpdResponse(): reading response
20181107 193001 readMpdResponse(): success $str=(OK)
20181107 193001 readMpdResponse(): success $resp[0]=(volume: 0)
20181107 193001 engine-mpd: UI state=(stop), MPD state=(stop)
20181107 193001 engine-mpd: Idle
20181107 193001 engine-mpd: Wait for idle timeout
20181107 193001 readMpdResponse(): reading response
20181107 193008 waitWorker(): Start (snd-config, w_active=1)
20181107 193009 waitWorker(): Wait (1)
20181107 193010 worker: Job spotifysvc
20181107 193011 readMpdResponse(): success $str=(OK)
20181107 193011 readMpdResponse(): success $resp[0]=(changed: mixer)
20181107 193011 engine-mpd: resp[0]=(changed: mixer)
20181107 193011 engine-mpd: Get new status
20181107 193011 readMpdResponse(): success $str=(OK)
20181107 193011 readMpdResponse(): success $resp[0]=(changed: mixer)
20181107 193011 engine-mpd: resp[0]=(changed: mixer)
20181107 193011 engine-mpd: Get new status
20181107 193011 readMpdResponse(): reading response
20181107 193011 readMpdResponse(): success $str=(OK)
20181107 193011 readMpdResponse(): success $resp[0]=(volume: 0)
20181107 193011 engine-mpd: Idle timeout event=(changed: mixer)
20181107 193011 engine-mpd: Generating enhanced metadata
20181107 193011 readMpdResponse(): reading response
20181107 193011 readMpdResponse(): success $str=(OK)
20181107 193011 readMpdResponse(): success $resp[0]=(volume: 0)
20181107 193011 engine-mpd: Idle timeout event=(changed: mixer)
20181107 193011 engine-mpd: Generating enhanced metadata
20181107 193011 readMpdResponse(): reading response
20181107 193011 readMpdResponse(): success $str=(OK)
20181107 193011 readMpdResponse(): success $resp[0]=(OK)
20181107 193011 readMpdResponse(): reading response
20181107 193011 readMpdResponse(): success $str=(OK)
20181107 193011 readMpdResponse(): success $resp[0]=(OK)
20181107 193012 worker: (librespot --name "Kitchen" --bitrate 320 --initial-volume 100 --cache /var/local/www/spotify_cache --backend alsa --device "default:CARD=sndrpihifiberry" --onevent /var/local/www/commandw/spotevent.sh > /dev/null 2>&1 &)
20181107 193012 waitWorker(): Wait (2)
20181107 193012 waitWorker(): End (snd-config, w_active=0)
20181107 193012 waitWorker(): Start (snd-config, w_active=1)
20181107 193012 enhanceMetadata(): File is NULL
20181107 193012 engine-mpd: Metadata returned to client: Size=(26)
20181107 193012 enhanceMetadata(): File is NULL
20181107 193012 engine-mpd: Metadata returned to client: Size=(26)
20181107 193012 enhanceMetadata(): File is NULL
20181107 193012 engine-mpd: Metadata returned to client: Size=(26)
20181107 193012 enhanceMetadata(): File is NULL
20181107 193012 engine-mpd: Metadata returned to client: Size=(26)
20181107 193013 enhanceMetadata(): File is NULL
20181107 193013 engine-mpd: Metadata returned to client: Size=(26)
20181107 193013 engine-mpd: Connect
20181107 193013 engine-mpd: Session loaded
20181107 193013 engine-mpd: Open socket
20181107 193013 readMpdResponse(): reading response
20181107 193013 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181107 193013 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181107 193013 engine-mpd: Get initial status
20181107 193013 readMpdResponse(): reading response
20181107 193013 readMpdResponse(): success $str=(OK)
20181107 193013 readMpdResponse(): success $resp[0]=(volume: 0)
20181107 193013 engine-mpd: UI state=(stop), MPD state=(stop)
20181107 193013 engine-mpd: Idle
20181107 193013 engine-mpd: Wait for idle timeout
20181107 193013 readMpdResponse(): reading response
20181107 193013 waitWorker(): Wait (1)
20181107 193013 waitWorker(): End (snd-config, w_active=0)
20181107 193013 enhanceMetadata(): File is NULL
20181107 193014 engine-mpd: Metadata returned to client: Size=(26)
20181107 193014 engine-mpd: Connect
20181107 193014 engine-mpd: Session loaded
20181107 193014 engine-mpd: Open socket
20181107 193014 readMpdResponse(): reading response
20181107 193014 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181107 193014 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181107 193014 engine-mpd: Get initial status
20181107 193014 readMpdResponse(): reading response
20181107 193014 readMpdResponse(): success $str=(OK)
20181107 193014 readMpdResponse(): success $resp[0]=(volume: 0)
20181107 193014 engine-mpd: UI state=(undefined), MPD state=(stop)
20181107 193014 engine-mpd: Generating enhanced metadata
20181107 193014 readMpdResponse(): reading response
20181107 193014 readMpdResponse(): success $str=(OK)
20181107 193014 readMpdResponse(): success $resp[0]=(OK)
20181107 193014 enhanceMetadata(): File is NULL
20181107 193014 engine-mpd: Metadata returned to client: Size=(25)
20181107 193014 engine-mpd: Connect
20181107 193014 engine-mpd: Session loaded
20181107 193014 engine-mpd: Open socket
20181107 193014 readMpdResponse(): reading response
20181107 193014 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181107 193014 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181107 193014 engine-mpd: Get initial status
20181107 193014 readMpdResponse(): reading response
20181107 193014 readMpdResponse(): success $str=(OK)
20181107 193014 readMpdResponse(): success $resp[0]=(volume: 0)
20181107 193014 engine-mpd: UI state=(stop), MPD state=(stop)
20181107 193014 engine-mpd: Idle
20181107 193014 engine-mpd: Wait for idle timeout
20181107 193014 readMpdResponse(): reading response
Close
Posts: 12
Threads: 6
Joined: Nov 2018
Reputation:
0
this fixes it:
https://github.com/pimusicbox/pimusicbox/issues/480
run one line at a time:
sudo service librespot stop
cd /usr/local/bin
sudo wget https://github.com/pimusicbox/librespot/...rry_pi.zip
sudo unzip librespot-linux-armhf-raspberry_pi.zip
sudo rm librespot-linux-armhf-raspberry_pi.zip
sudo service librespot start
Posts: 57
Threads: 12
Joined: Apr 2018
Reputation:
1
11-08-2018, 07:27 AM
(This post was last modified: 11-08-2018, 07:32 AM by radu-.
Edit Reason: news
)
(11-07-2018, 07:28 PM)gibman Wrote: this fixes it:
https://github.com/pimusicbox/pimusicbox/issues/480
run one line at a time:
sudo service librespot stop
cd /usr/local/bin
sudo wget https://github.com/pimusicbox/librespot/...rry_pi.zip
sudo unzip librespot-linux-armhf-raspberry_pi.zip
sudo rm librespot-linux-armhf-raspberry_pi.zip
sudo service librespot start
I can't get it to show up. I had the same problem as you and followed these instructions, but there's no librespot service to stop or start. I rebooted the pi, but I still can't see it in spotify.
LE: I got to see it now, but when I'm trying to listen to something, it shows as connecting in spotify (andoid), then it stops and I can't see moode anymore in spotify connect.
Posts: 12
Threads: 6
Joined: Nov 2018
Reputation:
0
(11-08-2018, 07:27 AM)radu- Wrote: (11-07-2018, 07:28 PM)gibman Wrote: this fixes it:
https://github.com/pimusicbox/pimusicbox/issues/480
run one line at a time:
sudo service librespot stop
cd /usr/local/bin
sudo wget https://github.com/pimusicbox/librespot/...rry_pi.zip
sudo unzip librespot-linux-armhf-raspberry_pi.zip
sudo rm librespot-linux-armhf-raspberry_pi.zip
sudo service librespot start
I can't get it to show up. I had the same problem as you and followed these instructions, but there's no librespot service to stop or start. I rebooted the pi, but I still can't see it in spotify.
LE: I got to see it now, but when I'm trying to listen to something, it shows as connecting in spotify (andoid), then it stops and I can't see moode anymore in spotify connect.
Plz make sure that this is the version you are uaing;
Taken from the github discussion that I linked to.
Code: wget https://github.com/pimusicbox/librespot/releases/download/v20180529-1e69138/librespot-linux-armhf-raspberry_pi.zip
After extracting the file make sure the binary is indeed the correct one.
ls -l /usr/local/bin
The
Posts: 5,503
Threads: 168
Joined: Apr 2018
Reputation:
203
(11-08-2018, 08:50 AM)gibman Wrote: (11-08-2018, 07:27 AM)radu- Wrote: (11-07-2018, 07:28 PM)gibman Wrote: this fixes it:
https://github.com/pimusicbox/pimusicbox/issues/480
run one line at a time:
sudo service librespot stop
cd /usr/local/bin
sudo wget https://github.com/pimusicbox/librespot/...rry_pi.zip
sudo unzip librespot-linux-armhf-raspberry_pi.zip
sudo rm librespot-linux-armhf-raspberry_pi.zip
sudo service librespot start
I can't get it to show up. I had the same problem as you and followed these instructions, but there's no librespot service to stop or start. I rebooted the pi, but I still can't see it in spotify.
LE: I got to see it now, but when I'm trying to listen to something, it shows as connecting in spotify (andoid), then it stops and I can't see moode anymore in spotify connect.
Plz make sure that this is the version you are uaing;
Taken from the github discussion that I linked to.
Code: wget https://github.com/pimusicbox/librespot/releases/download/v20180529-1e69138/librespot-linux-armhf-raspberry_pi.zip
After extracting the file make sure the binary is indeed the correct one.
ls -l /usr/local/bin
The
Have a look at Tim's post about upcoming r4.4. It includes
Quote:- FIX: Librespot fail on armv6l (Pi 1B | Zero | Zero W)
Should be out shortly both as an installable image and as an in-place update to r4.3.
Regards,
Kent
Posts: 57
Threads: 12
Joined: Apr 2018
Reputation:
1
(11-08-2018, 01:33 PM)TheOldPresbyope Wrote: (11-08-2018, 08:50 AM)gibman Wrote: (11-08-2018, 07:27 AM)radu- Wrote: (11-07-2018, 07:28 PM)gibman Wrote: this fixes it:
https://github.com/pimusicbox/pimusicbox/issues/480
run one line at a time:
sudo service librespot stop
cd /usr/local/bin
sudo wget https://github.com/pimusicbox/librespot/...rry_pi.zip
sudo unzip librespot-linux-armhf-raspberry_pi.zip
sudo rm librespot-linux-armhf-raspberry_pi.zip
sudo service librespot start
I can't get it to show up. I had the same problem as you and followed these instructions, but there's no librespot service to stop or start. I rebooted the pi, but I still can't see it in spotify.
LE: I got to see it now, but when I'm trying to listen to something, it shows as connecting in spotify (andoid), then it stops and I can't see moode anymore in spotify connect.
Plz make sure that this is the version you are uaing;
Taken from the github discussion that I linked to.
Code: wget https://github.com/pimusicbox/librespot/releases/download/v20180529-1e69138/librespot-linux-armhf-raspberry_pi.zip
After extracting the file make sure the binary is indeed the correct one.
ls -l /usr/local/bin
The
Have a look at Tim's post about upcoming r4.4. It includes
Quote:- FIX: Librespot fail on armv6l (Pi 1B | Zero | Zero W)
Should be out shortly both as an installable image and as an in-place update to r4.3.
Regards,
Kent Thanks for the info.
|