Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: Can't connect to NAS
#1
Got internet radio and Spotify but can't get the software to find or connect to my NAS. Here's the log if it helps

m
NAS Source
REMOVE this NAS source
MPD database update starts automatically after saving.
Settings  SAVE CancelMount error: Click to view moode.log for error msg
Type
  NFS 

NFS
[size=undefined]
 


 [/url]
Server
  MoOde/192.168.0.11/user\n [/size]

MoOde/192.168.0.11/user
[size=undefined]
 


 
EDIT server manually
Name
 Friendly name for this NAS source.
Advanced
Charset
  UTF8 (default)  ISO 8859-1  [/size]
UTF8 (default)
[size=undefined]
 


 
Rsize
 
Wsize
 [url=http://192.168.0.60/src-config.php?cmd=edit&id=1#notarget]
Mount flags
vers=2.0 or 3.0 may be needed and/or sec=ntlm depending on what the NAS requires.
[/size]

×

Moode Log

20181118 175225 worker: - Start
20181118 175225 worker: Successfully daemonized
20181118 175225 worker: Integrity check ok
20181118 175225 worker: Session loaded
20181118 175225 worker: Debug logging (off)
20181118 175225 worker: - Platform
20181118 175227 worker: Host (moode)
20181118 175227 worker: Hdwr (Pi-3B 1GB v1.2)
20181118 175227 worker: Arch (armv7l)
20181118 175227 worker: Rasp (9.4)
20181118 175227 worker: Kver (4.14.76-v7+)
20181118 175227 worker: Ktyp (Standard)
20181118 175227 worker: Gov  (performance)
20181118 175227 worker: Rel  (Moode 4.3 2018-09-27)
20181118 175227 worker: Upd  (2018-10-19)
20181118 175227 worker: MPD  (0.20.20)
20181118 175227 worker: USB boot not enabled yet
20181118 175227 worker: File system expanded
20181118 175227 worker: HDMI port off
20181118 175227 worker: File check ok
20181118 175227 worker: - Network
20181118 175227 worker: eth0 exists
20181118 175227 worker: eth0 (192.168.0.60)
20181118 175227 worker: wlan0 exists
20181118 175227 worker: wifi country (GB)
20181118 175227 worker: wlan0 SSID is blank
20181118 175227 worker: eth0 addr exists, AP mode not started
20181118 175227 worker: wlan0 address not assigned
20181118 175227 worker: - Audio
20181118 175227 worker: ALSA outputs unmuted
20181118 175227 worker: ALSA card number (0)
20181118 175227 worker: Audio out (I2S audio device)
20181118 175227 worker: Audio dev (Soekris DAM1021/1121 (I2S))
20181118 175227 worker: ALSA mixer name (Digital)
20181118 175227 worker: MPD volume control (disabled)
20181118 175227 worker: Hdwr volume controller not detected
20181118 175227 worker: - Services
20181118 175227 worker: Reset renderer active
20181118 175230 worker: MPD started
20181118 175230 worker: MPD scheduler policy (time-share)
20181118 175230 worker: Configure MPD outputs
20181118 175230 worker: MPD output 1 ALSA default (on)
20181118 175230 worker: MPD output 2 ALSA crossfeed (off)
20181118 175230 worker: MPD output 3 ALSA parametric eq (off)
20181118 175230 worker: MPD output 4 ALSA graphic eq (off)
20181118 175230 worker: MPD output 5 ALSA bluetooth (off)
20181118 175230 worker: MPD crossfade (off)
20181118 175230 worker: Spotify receiver started
20181118 175230 worker: - Music sources
20181118 175230 worker: USB sources (none attached)
20181118 175230 wrk_sourcemount(): Mount error: (mount.nfs: requested NFS version or transport protocol is not supported)
20181118 175230 worker: NAS sources (mountall initiated)
20181118 175230 worker: - Miscellaneous
20181118 175230 worker: Volume level (0) restored
20181118 175230 worker: Maintenance interval (21600)
20181118 175230 worker: Screen saver activation (Never)
20181118 175230 worker: Watchdog started
20181118 175230 worker: Ready
20181118 175233 worker: Job netcfg
20181118 175236 worker: Job netcfg
20181118 175906 worker: Job keyboard
20181118 183758 worker: Job sourcecfg
20181118 183758 wrk_sourcemount(): Mount error: (mount.nfs: requested NFS version or transport protocol is not supported)
20181118 183758 src-config(): Job: updmpddb
20181118 183801 worker: Job updmpddb
20181118 184005 wrk_sourcemount(): Mount error: (mount.nfs: requested NFS version or transport protocol is not supported)
20181118 184005 src-config: remount: (unmountall initiated, mountall initiated)
20181118 184627 worker: Job sourcecfg
20181118 184627 wrk_sourcemount(): Mount error: (mount.nfs: requested NFS version or transport protocol is not supported)
20181118 184627 src-config(): Job: updmpddb
20181118 184630 worker: Job updmpddb
20181118 185328 worker: Job sourcecfg
20181118 185328 wrk_sourcemount(): Mount error: (mount.nfs: requested NFS version or transport protocol is not supported)
20181118 185329 src-config(): Job: updmpddb
20181118 185331 worker: Job updmpddb
20181118 185744 worker: Job updmpddb



Close
Reply
#2
Post a screen shot of the NAS config screen
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#3
Is this what you need? I tried a scan with the default set as Samba and it found nothing


Attached Files Thumbnail(s)
   
Reply
#4
If the Samba scan did not find your NAS it would suggest either a network issue or that the NAS is not running Samba to share files.

The screen shot shows NFS being used. Did you explicitly configure your NAS to use NFS?

Are you able to connect to your NAS from PC or Mac? If yes then post the connect string or a screen shot of the connection dialog.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#5
Is this what you need? The network address is 192.168.0.11


Attached Files Thumbnail(s)
   
Reply
#6
I'm also unable to create a samba connection to my Synology NAS.  

In my case the NAS is only running the samba service (set to SMB2 and above) and for simplicity has a network called 'NAS'.  I don't have any issues connecting to this with an other device and have followed the guidance Unkgd provides here: http://moodeaudio.org/forum/showthread.p...ight=Samba, but no joy with my install of Moode.  

Given I mainly use Windows 10 I tried the suggestion of removing the leading slashes and as my collection resides in a folder called 'music' I entered  "NAS/music". This however triggers a mount error, the log for which is as below. (I 've noticed that this log mentions 'mount error 95' and 'refer to mount.cifs(8)' an issue which also featured on Volumio - see: https://github.com/volumio/Volumio2/issues/1524)


20181120 211231 worker: - Start
20181120 211232 worker: Successfully daemonized
20181120 211232 worker: Integrity check ok
20181120 211232 worker: Session loaded
20181120 211232 worker: Debug logging (off)
20181120 211232 worker: - Platform
20181120 211234 worker: Host (moode)
20181120 211234 worker: Hdwr (Pi-2B 1GB v1.1)
20181120 211234 worker: Arch (armv7l)
20181120 211234 worker: Rasp (9.4)
20181120 211234 worker: Kver (4.14.76-v7+)
20181120 211234 worker: Ktyp (Standard)
20181120 211234 worker: Gov  (performance)
20181120 211234 worker: Rel  (Moode 4.3 2018-09-27)
20181120 211234 worker: Upd  (2018-10-19)
20181120 211234 worker: MPD  (0.20.20)
20181120 211234 worker: USB boot not enabled yet
20181120 211234 worker: File system expanded
20181120 211234 worker: HDMI port off
20181120 211235 worker: File check ok
20181120 211235 worker: - Network
20181120 211235 worker: eth0 exists
20181120 211235 worker: eth0 wait 0 for IP address
20181120 211238 worker: eth0 wait 1 for IP address
20181120 211241 worker: eth0 wait 2 for IP address
20181120 211244 worker: eth0 wait 3 for IP address
20181120 211247 worker: eth0 wait 4 for IP address
20181121 093339 worker: eth0 wait 5 for IP address
20181121 093342 worker: eth0 wait 6 for IP address
20181121 093345 worker: eth0 wait 7 for IP address
20181121 093348 worker: eth0 wait 8 for IP address
20181121 093351 worker: eth0 wait 9 for IP address
20181121 093354 worker: eth0 address not assigned
20181121 093354 worker: wlan0 exists
20181121 093354 worker: wifi country (US)
20181121 093354 worker: wlan0 trying SSID (Interweb2)
20181121 093354 worker: wlan0 (192.168.1.61)
20181121 093354 worker: - Audio
20181121 093355 worker: ALSA outputs unmuted
20181121 093355 worker: ALSA card number (0)
20181121 093355 worker: Audio out (I2S audio device)
20181121 093355 worker: Audio dev (IQaudIO Pi-DAC+)
20181121 093355 worker: ALSA mixer name (Digital)
20181121 093355 worker: MPD volume control (software)
20181121 093355 worker: Hdwr volume controller exists
20181121 093355 worker: Chip options (Burr Brown PCM5122)
20181121 093355 worker: - Services
20181121 093355 worker: Reset renderer active
20181121 093357 worker: MPD started
20181121 093357 worker: MPD scheduler policy (time-share)
20181121 093357 worker: Configure MPD outputs
20181121 093358 worker: MPD output 1 ALSA default (on)
20181121 093358 worker: MPD output 2 ALSA crossfeed (off)
20181121 093358 worker: MPD output 3 ALSA parametric eq (off)
20181121 093358 worker: MPD output 4 ALSA graphic eq (off)
20181121 093358 worker: MPD output 5 ALSA bluetooth (off)
20181121 093358 worker: MPD crossfade (off)
20181121 093358 worker: Airplay receiver started
20181121 093358 worker: Airplay volume mgt (auto)
20181121 093358 worker: UPnP renderer started
20181121 093358 worker: Bluetooth controller started
20181121 093528 worker: Bluetooth controller initialized
20181121 093528 worker: - Music sources
20181121 093528 worker: USB sources (none attached)
20181121 093529 worker: NAS sources (none configured)
20181121 093529 worker: - Miscellaneous
20181121 093529 worker: Volume level (100) restored
20181121 093529 worker: Maintenance interval (21600)
20181121 093529 worker: Screen saver activation (Never)
20181121 093529 worker: Watchdog started
20181121 093529 worker: Ready
20181121 103141 worker: Job sourcecfg
20181121 103141 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 103141 src-config(): Job: updmpddb
20181121 103144 worker: Job updmpddb
20181121 103504 worker: Job sourcecfg
20181121 103504 wrk_sourcemount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20181121 103505 src-config(): Job: updmpddb
20181121 103507 worker: Job updmpddb
20181121 110213 worker: Job sourcecfg
20181121 110213 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 110214 src-config(): Job: updmpddb
20181121 110217 worker: Job updmpddb
20181121 110341 worker: Job sourcecfg
20181121 110342 wrk_sourcemount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20181121 110342 src-config(): Job: updmpddb
20181121 110345 worker: Job updmpddb
20181121 111417 worker: Job sourcecfg
20181121 111418 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 111418 src-config(): Job: updmpddb
20181121 111421 worker: Job updmpddb
20181121 111558 worker: Job sourcecfg
20181121 111559 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 111559 src-config(): Job: updmpddb
20181121 111602 worker: Job updmpddb
20181121 112550 worker: Job sourcecfg
20181121 112551 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 112551 src-config(): Job: updmpddb
20181121 112554 worker: Job updmpddb
Reply
#7
(11-21-2018, 08:06 AM)despearce Wrote: Is this what you need? The network address is 192.168.0.11

Based on your info, I would expect either "192.168.0.11/music" or "NSA325-V2/music" to work in the Server field in the NAS Source panel.

Regards,
Kent

Added in edit: server type SMB.
Reply
#8
(11-21-2018, 11:31 AM)Zigzag Wrote: I'm also unable to create a samba connection to my Synology NAS.  

In my case the NAS is only running the samba service (set to SMB2 and above) and for simplicity has a network called 'NAS'.  I don't have any issues connecting to this with an other device and have followed the guidance Unkgd provides here: http://moodeaudio.org/forum/showthread.p...ight=Samba, but no joy with my install of Moode.  

Given I mainly use Windows 10 I tried the suggestion of removing the leading slashes and as my collection resides in a folder called 'music' I entered  "NAS/music". This however triggers a mount error, the log for which is as below.  (I 've noticed that this log mentions 'mount error 95' and 'refer to mount.cifs(8)' an issue which also featured on Volumio - see: https://github.com/volumio/Volumio2/issues/1524)


20181120 211231 worker: - Start
20181120 211232 worker: Successfully daemonized
20181120 211232 worker: Integrity check ok
20181120 211232 worker: Session loaded
20181120 211232 worker: Debug logging (off)
20181120 211232 worker: - Platform
20181120 211234 worker: Host (moode)
20181120 211234 worker: Hdwr (Pi-2B 1GB v1.1)
20181120 211234 worker: Arch (armv7l)
20181120 211234 worker: Rasp (9.4)
20181120 211234 worker: Kver (4.14.76-v7+)
20181120 211234 worker: Ktyp (Standard)
20181120 211234 worker: Gov  (performance)
20181120 211234 worker: Rel  (Moode 4.3 2018-09-27)
20181120 211234 worker: Upd  (2018-10-19)
20181120 211234 worker: MPD  (0.20.20)
20181120 211234 worker: USB boot not enabled yet
20181120 211234 worker: File system expanded
20181120 211234 worker: HDMI port off
20181120 211235 worker: File check ok
20181120 211235 worker: - Network
20181120 211235 worker: eth0 exists
20181120 211235 worker: eth0 wait 0 for IP address
20181120 211238 worker: eth0 wait 1 for IP address
20181120 211241 worker: eth0 wait 2 for IP address
20181120 211244 worker: eth0 wait 3 for IP address
20181120 211247 worker: eth0 wait 4 for IP address
20181121 093339 worker: eth0 wait 5 for IP address
20181121 093342 worker: eth0 wait 6 for IP address
20181121 093345 worker: eth0 wait 7 for IP address
20181121 093348 worker: eth0 wait 8 for IP address
20181121 093351 worker: eth0 wait 9 for IP address
20181121 093354 worker: eth0 address not assigned
20181121 093354 worker: wlan0 exists
20181121 093354 worker: wifi country (US)
20181121 093354 worker: wlan0 trying SSID (Interweb2)
20181121 093354 worker: wlan0 (192.168.1.61)
20181121 093354 worker: - Audio
20181121 093355 worker: ALSA outputs unmuted
20181121 093355 worker: ALSA card number (0)
20181121 093355 worker: Audio out (I2S audio device)
20181121 093355 worker: Audio dev (IQaudIO Pi-DAC+)
20181121 093355 worker: ALSA mixer name (Digital)
20181121 093355 worker: MPD volume control (software)
20181121 093355 worker: Hdwr volume controller exists
20181121 093355 worker: Chip options (Burr Brown PCM5122)
20181121 093355 worker: - Services
20181121 093355 worker: Reset renderer active
20181121 093357 worker: MPD started
20181121 093357 worker: MPD scheduler policy (time-share)
20181121 093357 worker: Configure MPD outputs
20181121 093358 worker: MPD output 1 ALSA default (on)
20181121 093358 worker: MPD output 2 ALSA crossfeed (off)
20181121 093358 worker: MPD output 3 ALSA parametric eq (off)
20181121 093358 worker: MPD output 4 ALSA graphic eq (off)
20181121 093358 worker: MPD output 5 ALSA bluetooth (off)
20181121 093358 worker: MPD crossfade (off)
20181121 093358 worker: Airplay receiver started
20181121 093358 worker: Airplay volume mgt (auto)
20181121 093358 worker: UPnP renderer started
20181121 093358 worker: Bluetooth controller started
20181121 093528 worker: Bluetooth controller initialized
20181121 093528 worker: - Music sources
20181121 093528 worker: USB sources (none attached)
20181121 093529 worker: NAS sources (none configured)
20181121 093529 worker: - Miscellaneous
20181121 093529 worker: Volume level (100) restored
20181121 093529 worker: Maintenance interval (21600)
20181121 093529 worker: Screen saver activation (Never)
20181121 093529 worker: Watchdog started
20181121 093529 worker: Ready
20181121 103141 worker: Job sourcecfg
20181121 103141 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 103141 src-config(): Job: updmpddb
20181121 103144 worker: Job updmpddb
20181121 103504 worker: Job sourcecfg
20181121 103504 wrk_sourcemount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20181121 103505 src-config(): Job: updmpddb
20181121 103507 worker: Job updmpddb
20181121 110213 worker: Job sourcecfg
20181121 110213 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 110214 src-config(): Job: updmpddb
20181121 110217 worker: Job updmpddb
20181121 110341 worker: Job sourcecfg
20181121 110342 wrk_sourcemount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20181121 110342 src-config(): Job: updmpddb
20181121 110345 worker: Job updmpddb
20181121 111417 worker: Job sourcecfg
20181121 111418 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 111418 src-config(): Job: updmpddb
20181121 111421 worker: Job updmpddb
20181121 111558 worker: Job sourcecfg
20181121 111559 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 111559 src-config(): Job: updmpddb
20181121 111602 worker: Job updmpddb
20181121 112550 worker: Job sourcecfg
20181121 112551 wrk_sourcemount(): Mount error: (mount error: could not resolve address for NAS: Unknown error)
20181121 112551 src-config(): Job: updmpddb
20181121 112554 worker: Job updmpddb

Post a screen shot of NAS config and also the connect string or screen shot of the connection dialog from the system that successfully connects to your NAS.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#9
(11-21-2018, 02:44 PM)Tim Curtis Wrote: Post a screen shot of NAS config and also the connect string or screen shot of the connection dialog from the system that successfully connects to your NAS.

Sorry I got pulled away by work - I should have done this ages ago.  Is this the info you require?


Attached Files Thumbnail(s)
       
Reply
#10
The connect string would be how you would manually connect to the NAS from your PC.

On Mac its done using Finder, Go, Connect to server. Then you type in server/share, maybe a userid and password or as in my case just select Guest and no password.

On Windows you would use File Manager but I don't know what the menu picks are...
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply


Forum Jump: