Thank you for your donation!


Problem adding WD My Cloud NAS on the network
#21
(04-18-2018, 07:12 AM)slavoo Wrote: That's exactly what I did and I did. I suspected my hardware or my home network but none was confirmed. I tested Volumio player and there it was no problem without configuration modifications. You may try a clean installation again, but I doubt it.

Slavo

Post the output from the 'mount' command for the successful mount and I'll have a look.
Reply
#22
(04-18-2018, 07:03 AM)Martin Wrote: Hi Tim

Thanks for your speedy response.

Unfortunately, neither of yoursuggestions seems to work.

When I add .local I get the same mount error saying 'could not resolve address for MYCLOUD-AP41K0: Unknown error'.

When I try using the IP address I get a message saying 'Share cannot be blank'.

Martin

How does your server appear in the SCAN results?
Reply
#23
I have a WD MyCloud NAS box (white version) and for me to use it with Moode I had to set up a username+password on the NAS box using its web admin interface. Soon as I did that everything worked and fell into place as long as I continue using the IP address.

As it happens I setup two users on the NAS box, the one I use in Moode is a user called pidac which only has read-only permissions for the music share. Helps protect my 5,000+ albums from any potential unintended issues.
Reply
#24
(04-18-2018, 11:42 AM)Tim Curtis Wrote:
(04-18-2018, 07:03 AM)Martin Wrote: Hi Tim

Thanks for your speedy response.

Unfortunately, neither of yoursuggestions seems to work.

When I add .local I get the same mount error saying 'could not resolve address for MYCLOUD-AP41K0: Unknown error'.

When I try using the IP address I get a message saying 'Share cannot be blank'.

Martin

How does your server appear in the SCAN results?

It appears as;

MYCLOUD-AP41K0/Public

Martin
Reply
#25
Hi @Martin,

Try

IP_ADDRESS/Public

or

MYCLOUD-AP41K0.local/Public

-Tim
Reply
#26
Hello, the problem I mentioned with the addition of the WD My Cloud NAS was obviously in the installation. I did a clean install on the SD card again and everything was ok without stumbling.
But that did not solve all that unfortunately. I have to write here mainly for the developers of this good player that I was waiting for a much worse problem.
After reconfiguring my new Allo BOOS 1.2 card and plugging into the amplifier, I was in a way damaged by Cinch. I tried it again on the second free entrance and so on. So it damaged my receiver for a lot of money and I can not explain it. Before I played the same RPi + Volumio + Allo BOOS 1.2 without any problems from the same settings. How can lord developers ???

EDIT: Sorry for the criticism I've already solved it and everything is right without harm. Thank you for your help. But the cause was not my fault, but some inexplicable event.
Reply
#27
(04-18-2018, 11:47 PM)Tim Curtis Wrote: Hi @Martin,

Try

IP_ADDRESS/Public

or

MYCLOUD-AP41K0.local/Public

-Tim

Hi Tim

I am making some progress - changing to 'MYCLOUD-AP41K0.local/Public' worked and I now have a green tick that shows it has been mounted successfully.

In the Browse pane, I now see a NAS option. When I clicked on NAS, I could see MyCloud so I clicked to 'Update this folder'. I get a message saying 'Updating' but it kept updating overnight and didn't seem to be able to find my music files.  I may need to change the location of the files in MyCloud so that it can find them.

Martin
Reply
#28
Question 
I am having similar problems adding my Western Digital My Book Live NAS
I have recently updated to MoOde version 4.1 but had the same problem with the previous version
My NAS is found When i run the scan but it just will not mount - I have tried adding the .local and tried IP_ADDRESS/Public
as suggested but nothing works. I managed to install Volumio automatically by just running the scan.
Any help would be appreciated - See below copy of error log and screen print

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px 'Helvetica Neue'; color: #454545} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px 'Helvetica Neue'; color: #454545; min-height: 14.0px} span.Apple-tab-span {white-space:pre}
20180425 174918 worker: - Start
20180425 174918 worker: Successfully daemonized
20180425 174918 worker: - Init
20180425 174918 worker: Session loaded
20180425 174918 worker: Debug logging (off)
20180425 174919 worker: Host (moode)
20180425 174919 worker: Hdwr (Pi-3B 1GB v1.2)
20180425 174919 worker: Arch (armv7l)
20180425 174919 worker: Rasp (9.4)
20180425 174919 worker: Kver (4.14.32-v7+)
20180425 174919 worker: Ktyp (Standard)
20180425 174919 worker: Gov  (performance)
20180425 174919 worker: Rel  (Moode 4.1 2018-04-02)
20180425 174919 worker: Upd  (None)
20180425 174919 worker: MPD  (0.20.18)
20180425 174919 worker: USB boot not enabled yet
20180425 174919 worker: File system not expanded yet
20180425 174920 worker: HDMI port on
20180425 174920 worker: File check ok
20180425 174920 worker: - Network
20180425 174920 worker: eth0 exists
20180425 174920 worker: eth0 (192.168.1.226)
20180425 174920 worker: wlan0 exists
20180425 174920 worker: wifi country (GB)
20180425 174920 worker: wlan0 trying SSID (EE-BrightBox-ab4d7e)
20180425 174920 worker: wlan0 (192.168.1.70)
20180425 174920 worker: - Audio
20180425 174920 worker: ALSA outputs unmuted
20180425 174920 worker: Audio out (I2S audio device)
20180425 174920 worker: Audio dev (IQaudIO Pi-DAC PRO)
20180425 174920 worker: ALSA mixer name (Digital)
20180425 174920 worker: MPD volume control (software)
20180425 174921 worker: Hdwr volume controller exists
20180425 174921 worker: Chip options (Burr Brown PCM5242)
20180425 174921 worker: - Services
20180425 174923 worker: MPD started
20180425 174923 worker: MPD scheduler policy (time-share)
20180425 174923 worker: Configure MPD outputs
20180425 174923 worker: MPD output 1 ALSA default (on)
20180425 174923 worker: MPD output 2 ALSA crossfeed (off)
20180425 174923 worker: MPD output 3 ALSA parametric eq (off)
20180425 174923 worker: MPD output 4 ALSA graphic eq (off)
20180425 174923 worker: MPD output 5 ALSA bluetooth (off)
20180425 174923 worker: MPD crossfade (off)
20180425 174923 worker: - Last
20180425 174923 worker: USB source (082442042441F56A)
20180425 174923 wrk_sourcemount(): Mount error: (Couldn't chdir to /mnt/NAS/MBL1: No such file or directory)
20180425 174923 worker: NAS sources (mountall initiated)
20180425 174923 worker: Volume level (38) restored
20180425 174923 worker: Maintenance interval (21600)
20180425 174923 worker: Watchdog started
20180425 174923 worker: Ready
20180425 175048 worker: Job sourcecfg
20180425 175049 wrk_sourcemount(): Mount error: (Couldn't chdir to /mnt/NAS/MBL1: No such file or directory)
20180425 175058 worker: Job sourcecfg
20180425 175234 worker: Job sourcecfg
20180425 175234 wrk_sourcemount(): Mount error: (Couldn't chdir to /mnt/NAS/USBBB: No such file or directory)
20180425 175246 worker: Job sourcecfg
20180425 180445 worker: Job sourcecfg
20180425 180445 wrk_sourcemount(): Mount error: (Couldn't chdir to /mnt/NAS/MBL2: No such file or directory)
20180425 180634 worker: Job sourcecfg
20180425 180634 wrk_sourcemount(): Mount error: (Couldn't chdir to /mnt/NAS/MYBOOKLIVE: No such file or directory)
20180425 180855 worker: Job sourcecfg
20180425 180856 wrk_sourcemount(): Mount error: (Couldn't chdir to /mnt/NAS/MYBOOKLIVE: No such file or directory)

   
Reply
#29
Hi,

Please run the command below from ssh and post the output.

ls -l /mnt

-Tim
Reply
#30
Hi Tim - screen shot attached
Thanks
Martin

   
Reply


Forum Jump: