pydPiper for the 128x64 oled and raspdac script for the 16x2 oled.
Remy
Hi Adrian.....I'm building your oled for a custom raspbian player and used the volumio version as instructed here...
Quote:Build and install on Debian-based OS running MPD, follow the instructions for Build and install on Volumio but use
when building mpd_oled
All works fine except the Spectrum analyser as I omitted the "MPD audio output needs to be copied to a named pipe" as it was for Volumio.
Where would I need to put it for vanilla Raspbian ?
Thanks,
Bob.
Hi Bob
Thanks for the heads-up message. I haven't received any email notifications about new messages on this thread, or your private message, although I can see the alerts on the board. I follow everything up, so if I miss anything then anyone please send me a note to
adrian@antiprism.com to look at the Moode forum.
I´ll answer your question privately, as it is for a non-Moode sytem. Feel free to ask general questions by raising an issue on Github -
https://github.com/antiprism/mpd_oled/issues
@
remy1961, very cool system you have built!
Adrian.
Thanks adrii for this nice OLED software. I finally moved from Moode 4.0 to 4.3 and just installed mpd_oled. This video preview is my first version of Moode player with transparent acrilyc front panel in minimal aluminium e
nclosure W114×H50×D130mm, custom 3D printed back panel. Of course Raspberry Pi 3, Audiophonics I-SABRE AMP DAC ES9023 2x30W Class D, IR receiver, 2.42" white I2C OLED.
My new version with mpd_oled and front aluminium panel
I'm interested in the simplest way to moving all display layout few pixel down?
Thank you too Tim for great player, nice job guys!
Hi caca047
Very nice system. Looks really good!
I am afraid that there is no facility for changing the mpd_oled screen layout. However, if you are comfortable changing code then look at the display functions in
display.h, and where the
start_y parameter occurs, which is the vertical position on the screen where the widget will be drawn from. You can then amend the the
draw_spect_display (and
draw_clock) function in
main.cpp to change the start_y values to suit.
Adrian.
Thanks adrii but I just physically moved OLED about 1mm
and now is fine.
I am finnly add Audiophonics PI-SPC V2 Power Management Module and I can turn on RPi with push button on rotary encoder but I need to change and adapt volumio or runeaudio script for Power Management Module
https://www.audiophonics.fr/en/diy-kits-...11125.html
If anybody has modified script or guide for Audiophonics Power Management Module please share.
I use rotary encoder for preout volume. On right side is AMP volume potentiometer.
Finnaly all inside
hello, I have ordered this Ecran OLED 2.42 "128X64 SSD 1305 Blanc interface I2C / SPI Now.
I have the problem that does not work with mpd_oled.
The installation instructions as here in the forum ...
System:
Moode 4.3 with update
Raspberry pi 3 B +
Connected are the display -> pin 1, 3, 5, 6 -> raspberry.
On the display pin:
1: GND mass
2: Alimentation VCC 3.3V
3: D0 signal horloge = SCL
4: D1 signal DATA = SDA
Does not work ...
need your support ....
Thanks in advance