Moode Forum

Full Version: HIFIBERRY DIGI2 PRO support
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi

I'm using waveio usb to spdif converter with external linear psu with good results.
Considering i2s convertion using HIFIBERRY DIGI2 PRO
I don't see it in the list in moode audio devices, any chance it will work under Hifiberry digi pro +?

Thanks
David
(09-20-2021, 04:56 AM)motorica Wrote: [ -> ]Hi

I'm using waveio usb to spdif converter with external linear psu with good results.
Considering i2s convertion using HIFIBERRY DIGI2 PRO
I don't see it in the list in moode audio devices, any chance it will work under Hifiberry digi pro +?

Thanks
David

Hi, David.

The HiFiBerry Digi2 Pro datasheet says the overlay for config.txt is

dtoverlay=hifiberry-digi-pro

Regards,
Kent
Cool!

I saw this later:
https://www.hifiberry.com/blog/the-new-digi2-pro/

It should work.

Thank you Kent!

David
(09-20-2021, 11:19 AM)TheOldPresbyope Wrote: [ -> ]
(09-20-2021, 04:56 AM)motorica Wrote: [ -> ]Hi

I'm using waveio usb to spdif converter with external linear psu with good results.
Considering i2s convertion using HIFIBERRY DIGI2 PRO
I don't see it in the list in moode audio devices, any chance it will work under Hifiberry digi pro +?

Thanks
David

Hi, David.

The HiFiBerry Digi2 Pro datasheet says the overlay for config.txt is

dtoverlay=hifiberry-digi-pro

Regards,
Kent

True,
it works perfectly with below setup:

Code:
pi@moode2:/var/www/util $ cat /boot/config.txt
[cm4]
otg_mode=1

[pi4]
hdmi_force_hotplug:0=1
hdmi_force_hotplug:1=1

[all]
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=off
dtoverlay=hifiberry-digi-pro
force_eeprom_read=0
dtoverlay=disable-wifi
dtoverlay=disable-bt

pi@moode2:/var/www/util $ sudo ./sysinfo.sh

S Y S T E M   P A R A M E T E R S

moOde release        = 8.2.2 2022-10-23
RaspiOS            = 11.5
Linux kernel        = 5.15.61-v8+ #1579
Platform        = Pi-3B+ 1.3 1GB
Architecture        = aarch64 (64-bit)
.
.
.
NGINX version        = 1.18.0
SQLite3 version        = 3.34.1
Hostapd version        = 2.9
RPi.GPIO version    = 0.7.0
Code:
A U D I O   P A R A M E T E R S

Audio device        = HiFiBerry Digi+ Pro
Interface        = I2S
Mixer name        = none
Hardware mixer        = No
Supported formats    = S16_LE, S24_LE
ALSA max volume        = 100
ALSA output mode    = Direct (hw)
ALSA loopback        = Off
MPD max volume        = 80
Volume step limit    = 2
Display dB volume    = On
Audio source        = Local
Output device        = Local
Resume MPD        = No
Volume knob        = 0
Volume mute        = Unmuted
Saved MPD vol        = 0
Preamp volume        = 0
ALSA version        = 1.2.4-1.1+rpt2
SoX version        = 0.1.3-4

Bluetooth controller    = Off
Pairing agent        = Off
Airplay receiver    = On
Spotify receiver    = On
Squeezelite        = Off
RoonBridge        = Not installed
UPnP client        = Off
DLNA server        = Off
GPIO button handler    = Off
Multiroom sender    = Off
Multiroom receiver    = Disabled

Auto-shuffle        = Off
Ashuffle mode        = Track
Ashuffle filter        = None
Autoplay        = Off
Rotary encoder        = Off
Encoder params        = 100 2 3 23 24
USB volume knob        = Off
Polarity inversion    = Off
Crossfeed        = Off
Crossfade        = Off
Parametric EQ        = Off
Graphic EQ        = Off
CamillaDSP        = off
MPD httpd        = Off
Ignore CUE files    = Yes