11-12-2021, 06:23 AM
I have the Upnp renderer turned on and configured.
I can play content from my Ubuntu PC and screenshots show all is configured, found, and sending...
MoOde shows the appropriate activity on the RPi ethernet port and in the main page (screenshot)...but no output and when I try to open the audio-info tab nothing happens.
Strangely....the MoOde main window shows "Radio" as the input in the 'circular worm' and 'live radio' next to the 'bouncy-castle' ??
and the little 'bouncy-castle' audio icon is active and bouncing!! :-).
Any suggestions ?
RPi4 MoOde 7.5.0 (but same problem last 2 versions)
Used to work fine.... Pulseaudio-dlna
https://github.com/masmu/pulseaudio-dlna
Edit...some audio info at last...
This should be working...hmmm
This is weird "Volume mixer Fixed (0dB output)" as volume is Fixed in audio config.
So tried all other volume settings...software,hardware,null and still nothing.
I can play content from my Ubuntu PC and screenshots show all is configured, found, and sending...
MoOde shows the appropriate activity on the RPi ethernet port and in the main page (screenshot)...but no output and when I try to open the audio-info tab nothing happens.
Strangely....the MoOde main window shows "Radio" as the input in the 'circular worm' and 'live radio' next to the 'bouncy-castle' ??
and the little 'bouncy-castle' audio icon is active and bouncing!! :-).
Any suggestions ?
RPi4 MoOde 7.5.0 (but same problem last 2 versions)
Used to work fine.... Pulseaudio-dlna
https://github.com/masmu/pulseaudio-dlna
Edit...some audio info at last...
Code:
Input / Output
Source http://192.168.1.5:8080/dHlwZT0iYnJpZGdlIix1ZG49InV1aWQ6NWUyMTEwOTctNDY1OC01MTYxLWE2NjEtZGNhNjMyMDNiZmZjIg%3D%3D/stream.wav
Encoded at Unknown
Decoded to 16 bit, 44.1 kHz, Stereo, 1.411 Mbps
Output rate 16 bit, 44.1 kHz, Stereo, 1.411 Mbps
Output mode ALSA Direct (hw)
Output chain MPD -> hw -> Device
DSP operations
Resample rate Off
Selective rate Off
Resample quality Off
CamillaDSP Off
Volume mixer Fixed (0dB output)
Audio Device
Device DIYINHK USB Audio 2.0
Mixer name DIYINHK USB Audio 2.0
Interface USB
Formats S16_LE, S32_LE, SPECIAL, DSD_U32_BE
Platform Pi-4B 1.1 4GB
This is weird "Volume mixer Fixed (0dB output)" as volume is Fixed in audio config.
So tried all other volume settings...software,hardware,null and still nothing.