11-04-2018, 08:28 PM
Hi.
Need some help figuring this out...
Need moOde on my pi zero w to be able to play through bluetooth/airplay to my Chord Mojo.
I can connect with bluetooth and airplay fine and play audio if the onboard audio card is selected. If I select the USB output (the Mojo) then it disconnects bluetooth and will no longer pair (same with airplay).
I have no problem with the Mojo connected and playing webradio from the webinterface through moOde (sounds fine on the Mojo), but if I use bluetooth or airplay then nothing happens (other than the phone will disconnect when the usb is selected as output).
Any ideas?
Using latest version 4.3 2018-09-27.
Need some help figuring this out...
Need moOde on my pi zero w to be able to play through bluetooth/airplay to my Chord Mojo.
I can connect with bluetooth and airplay fine and play audio if the onboard audio card is selected. If I select the USB output (the Mojo) then it disconnects bluetooth and will no longer pair (same with airplay).
I have no problem with the Mojo connected and playing webradio from the webinterface through moOde (sounds fine on the Mojo), but if I use bluetooth or airplay then nothing happens (other than the phone will disconnect when the usb is selected as output).
Any ideas?
Using latest version 4.3 2018-09-27.
Code:
usb 1-1: new high-speed USB device number 3 using dwc_otg
usb 1-1: New USB device found, idVendor=245f, idProduct=0815
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Mojo
usb 1-1: SerialNumber: 413-001
usb 1-1: Warning! Unlikely big volume range (=32767), cval->res is probably wrong.
usb 1-1: [10] FU [PCM Playback Volume] ch = 2, val = -32767/0/1
usb 1-1: Warning! Unlikely big volume range (=32767), cval->res is probably wrong.
usb 1-1: [10] FU [PCM Playback Volume] ch = 1, val = -32767/0/1
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Mojo [Mojo], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code:
pi@moode:~ $ lsusb
Bus 001 Device 004: ID 245f:0815
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub