Hello,

I would like to switch between renderers via cmdline or by opening a URL.
Usecase is gpio buttons to activate squeezelite or airplay etc.
I checked moodeutl, but there are only options to restart a renderer not to activate one.

What is the best way to switch between renderers from a remote script?

TIA

Hello,

French LMS user with a Squeezebox Touch connected to my HT system, I am looking for an alternative to play my digital music and am testing moodeaudio.

I have several RPI3s and RPI3Bs that I plan to use for multiroom playback. 

Looking forward to learning

Hi, I'm new in the forum.
I was really bored and found a RPI3B in a drawer and thought I'd use it to play my FLAC collection. Let's do it!. I'm setting up with a Hifiberry Digi+ and playing with moode. I discovered moode a few weeks ago and I think it's great. My intention is to plug it to a WIIM PRO using spdif. Later on, maybe I will make a custom case with a 5-inch screen. I'm so bored  

Hi I'm new to moOde audio!

I am interested in: streaming audio, linux, open source, and especially: ideas around the circular economy and the re-use/repurposing of ''amazing/old" audio equipment.

Allo UsBridge Signature
Windows 11.0
Local NAS which is up and running, 17 TB of flac

This appears to be happening a lot more frequently with release 8.3.9, it is the first time i installed the 64-bit version

When i reboot my computer the USBridge hangs.  After a bit, the page displays and after clicking a radio station or system>config it begins to hang.  i was able to start a putty session and got this far (I was trying to issue cmd moodeutl --mpdlog

Hi everyone,

I have a rapberry 3 with ProtoDAC installed. I can connect to Moode via mconnect on the Iphone and playing qobuz music. But if i use FireStream on my MacBookPro, there is nothing in the desktop app in qobuz to select, exept the internal loudspeakers. I also tried to install in Termnal the Bubble UpnP, the same problem, they see both the MoodeUpnP, but there is no possibility to select it via Qobuz.

Has anyone an idea??

I want to make an subscription to Qobuz, but only if it is working from the Desktop, because it is more comfortable as from the little Iphone. So I am only registered but have not paid it, because it didn´t work.

ALex

Hi,
i have a problme with the volume wheel in de Web UI on my Iphone.
The circle ist out of center and the response of the wheel is very bad, i cant slide up the volume like in older version with one slide.
response beaks up during the slide and i have to slide more tims over the wheel for getting the volume up to a higher number.

Setting:
RPiOS: 11.9 Bullseye 64-bit | Linux: 6.1.21 64-bit
Model: Pi-3B 1GB
Audio: Pi Headphone jack
Release 8.3.9 2024-02-23

Someone have the same issues, or can give me some tips for getting the wheel back to a smoothe slinding up and down?

thx

Hi, I use MoodeAudio 8.3.9 32bit on RaspberryPi 2b 1GB. Everything works as it should. 
Now I am forced to move the Raspberry to another room and connect via WiFi. I used USB WiFi. 
Bus 001 Device 006: ID 0bda:f179 Realtek Semiconductor Corp. RTL8188FTV 802.11b/g/n 1T1R 2.4G WLAN Adapter
I can't get it to work, in another distribution it works without problems. I can't enable UP here, permission problem. 
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:e0:4c:81:88:02 brd ff:ff:ff:ff:ff:ff

So what is the procedure  


Or how to install Moode Audio on another distribution ? Maybe DietPi ? 

Thank You David.

Revisiting this....as still not out of the woods yet....Library U/D hasn't worked for some months....so rely on regenerating library.
Now using 8.3.9
Here's a dump of the log....after rebooting and attempting library update :

20240312 080323 worker: --
20240312 080323 worker: -- Start moOde 8 series
20240312 080323 worker: --
20240312 080323 worker: Successfully daemonized
20240312 080323 worker: Wait for Linux startup...
20240312 080342 worker: Linux startup complete
20240312 080348 worker: Boot config backed up
20240312 080355 worker: Session loaded
20240312 080404 worker: Package holds applied
20240312 080407 worker: File check complete
20240312 080407 worker: Debug logging off
20240312 080407 worker: Reduced logging off
20240312 080407 worker: --
20240312 080407 worker: -- Audio debug
20240312 080407 worker: --
20240312 080407 worker: ALSA cards:   0:b1 | 1:Headphones | 2:E30 | 3:empty
20240312 080407 worker: MPD config:   2:E30 | mixer:E30 | cardnum:2
20240312 080407 worker: Mixer name:   [E30 ]
20240312 080407 worker: Hdwr volume:  set to 0%
20240312 080407 worker: Volume knob:  0
20240312 080407 worker: --
20240312 080407 worker: -- System
20240312 080407 worker: --
20240312 080410 worker: Host:     moode
20240312 080410 worker: Model:    Pi-4B 1.5 4GB
20240312 080410 worker: moOde:    8.3.9 2024-02-23
20240312 080410 worker: RaspiOS:  11.8 Bullseye 64-bit
20240312 080410 worker: Kernel:   6.1.21 64-bit
20240312 080410 worker: MPD ver:  0.23.14
20240312 080410 worker: CPU gov:  ondemand
20240312 080410 worker: Userid:   pi
20240312 080410 worker: Homedir:  /home/pi
20240312 080410 worker: Timezone: Europe/London
20240312 080410 worker: Keyboard: gb
20240312 080410 worker: USB boot: enabled
20240312 080411 worker: File sys: expanded
20240312 080411 worker: HDMI out: off
20240312 080411 worker: Sys LED0: on
20240312 080411 worker: Sys LED1: on
20240312 080411 worker: --
20240312 080411 worker: -- Network
20240312 080411 worker: --
20240312 080411 worker: Eth: adapter exists
20240312 080411 worker: Eth: timeout off
20240312 080411 worker: Eth: method  static
20240312 080411 worker: Eth: address 192.168.0.30
20240312 080411 worker: Eth: netmask 255.255.255.0
20240312 080411 worker: Eth: gateway 0.0.0.0
20240312 080411 worker: Eth: pri DNS 194.168.4.100
20240312 080411 worker: Eth: domain  
20240312 080411 worker: Wlan: adapter does not exist
20240312 080411 worker: --
20240312 080411 worker: -- Software update
20240312 080411 worker: --
20240312 080411 worker: Automatic check off
20240312 080411 worker: --
20240312 080411 worker: -- File sharing
20240312 080411 worker: --
20240312 080411 worker: SMB file sharing:  on
20240312 080411 worker: NFS file sharing:  off
20240312 080411 worker: DLNA file sharing: off
20240312 080411 worker: --
20240312 080411 worker: -- Audio config
20240312 080411 worker: --
20240312 080411 worker: MPD config:    update skipped (USB audio device)
20240312 080411 worker: Audio device:  E30
20240312 080413 worker: Formats:       S32_LE, SPECIAL, DSD_U32_BE
20240312 080413 worker: Mixer type     Fixed (0dB)
20240312 080413 worker: Mixer name     E30
20240312 080413 worker: Hdwr volume:   controller detected
20240312 080413 worker: ALSA max vol:  65%
20240312 080413 worker: ALSA card:     2
20240312 080413 worker: ALSA mode:     Direct
20240312 080413 worker: ALSA loopback: off
20240312 080413 worker: CamillaDSP:    off
20240312 080413 worker: Renderers:     active flags reset
20240312 080413 worker: --
20240312 080413 worker: -- MPD startup
20240312 080413 worker: --
20240312 080418 worker: MPD service:        started
20240312 080418 worker: MPD port 6600:      accepting connections
20240312 080418 worker: MPD ALSA Default:   on
20240312 080418 worker: MPD ALSA Bluetooth: off
20240312 080418 worker: MPD HTTP Server:    off
20240312 080418 worker: MPD crossfade:      off
20240312 080418 worker: MPD ignore CUE:     yes
20240312 080418 worker: MPD CDSP volsync:   off
20240312 080418 worker: MPD CDSP volrange:  60 dB
20240312 080418 worker: --
20240312 080418 worker: -- Music sources
20240312 080418 worker: --
20240312 080418 worker: USB auto-mount: udisks-glue
20240312 080418 worker: USB drive:      Crucial2TB
20240312 080418 worker: USB drive:      Kingston1TB
20240312 080418 worker: USB drive:      Kingston1TB_
20240312 080418 worker: NAS sources:    no music sources defined
20240312 080418 worker: --
20240312 080418 worker: -- Feature availability
20240312 080418 worker: --
20240312 080418 worker: Input select:    available, src MPD, out E30
20240312 080418 worker: Bluetooth:       available, ALSA mode Default
20240312 080418 worker: AirPlay:         available
20240312 080418 worker: Spotify Connect: available
20240312 080418 worker: Squeezelite:     available
20240312 080418 worker: RoonBridge:      not installed
20240312 080418 worker: Multiroom:       available
20240312 080418 worker: UPnP client:     available
20240312 080418 worker: GPIO buttons:    available
20240312 080418 worker: HTTPS mode:      available
20240312 080418 worker: Stream recorder: n/a
20240312 080418 worker: --
20240312 080418 worker: -- Volume levels
20240312 080418 worker: --
20240312 080419 worker: Volume knob:   0
20240312 080419 worker: Saved MPD vol: -1
20240312 080419 worker: Saved SRC vol: 0
20240312 080419 worker: Mixer type:    none
20240312 080419 worker: Hdwr volume:   91%
20240312 080420 worker: CDSP volume:   0.0dB
20240312 080420 worker: --
20240312 080420 worker: -- Peripherals
20240312 080420 worker: --
20240312 080421 worker: Local display:   off
20240312 080421 worker: On-screen kbd:   off
20240312 080421 worker: Rotary encoder:  off
20240312 080421 worker: USB volume knob: off
20240312 080421 worker: LCD updater:     off
20240312 080421 worker: --
20240312 080421 worker: -- Miscellaneous
20240312 080421 worker: --
20240312 080421 worker: Auto-CoverView:    off
20240312 080421 worker: CoverView timeout: Never
20240312 080421 worker: Auto-shuffle:      off
20240312 080421 worker: Auto-play:         off
20240312 080421 worker: Web SSH server:    on
20240312 080421 worker: Maintenance task:  360 mins
20240312 080421 worker: Current view:      reset to Playback
20240312 080421 worker: Session check:     ok
20240312 080421 worker: --
20240312 080421 worker: -- Startup complete
20240312 080421 worker: --
20240312 080422 worker: Mount monitor:    off
20240312 080422 worker: Radio monitor:    off
20240312 080422 worker: Watchdog monitor: started
20240312 080422 worker: Responsiveness:   Default
20240312 080422 worker: Ready

Just to mention that I encounter the same problem (as in an earlier thread). If I choose one folder and choose "Update this folder", nothing happens. I must regenerate the entire library and it takes a long time as I have more than 100000 files...

Here is my log after having rebooted :