+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [PROBLEM] Sound Quality Moodeaudio 6.0.0 (/showthread.php?tid=1607)
Pages:
1
2
Sound Quality Moodeaudio 6.0.0 - Jedrek - 08-12-2019
I installed the new MoodeAudio 6.0.0. and rewritten all the settings I had in MoodeAudio 5.x manually, including the equalizer settings. It turned out that now, despite the identical settings, you can't listen to music!
The bass is heavily distorted, there is one big rumble and hoarseness.
I tried to set the output voltage level to -6dB, but it doesn't help!
It seems that the distortions arise via digital rather than analog.
I reduced the equalizer parameters to remove distortion, but then the sound gets flat!
I have started the old MoodeAudio 5.x again and the sound is very pleasant.
I have a question, was there anything combined with the equalizer in the new version 6.0.0?
Was there something changed in the settings of the audio card: HiFiBerry DAC + Pro?
Please help, I can't set the quality of the sound output from MoodeAudio 5.x.
RE: Sound Quality Moodeaudio 6.0.0 - Tim Curtis - 08-12-2019
I moved this post to support and will delete the redundant post.
To troubleshoot your issue you need tp post enough information to allow someone who has a DAC+Pro and stock moOde 6 to be able to replicate your setup and your settings and then try to reproduce your sound issue.
RE: Sound Quality Moodeaudio 6.0.0 - Jedrek - 08-12-2019
Please provide the data I have to provide. Please be advised that I have manually entered data from Moode audio 5.x to 6.0.0. from screen scans (printscreen). There is no mistake, I have checked several times whether the manually transferred data are consistent.
MoodeAudio 4.x = poor sound
MoodeAudio 5.x = very good sound
Moodeaudio 6.0 - very poor sound.
This is a based on idenctical eqaulizer setting !
I installed a clean MoodeAudio 6.0.0 image from the official distribution, and then manually configured the settings exactly as I had in the last version of MoodeAudio 5.
What configuration files should I send to reproduce the problem?
I have Raspberry 3B + with HiFiBerry DAC + Pro.
Now I was backed to Moode 5.x, because sound quality on version 6.0.0. is not acceptable.
Maybe "programmers" make changes in system driver HiFiBerry DAC + Pro ??
This problem was resolved on update 6.1.0 or not ?
RE: Sound Quality Moodeaudio 6.0.0 - grasshopper - 08-20-2019
@Jedrek
I don't have your dac, but I can't see above any mention of music source, files from a NAS? Spotify? Tidal via uPnP etc? Alsa set to hardware or software? Could it be that you have a hardware and software volume? I don't use EQ at all ever, intact I have a button on my pre amp that disables bass and treble controls, Moode sounds great here.
I have a headphone only system also playing sources from a NAS and Spotify. No distortion.
If you have screenshots of your EQ settings post them maybe someone with the same dac can try and help.
RE: Sound Quality Moodeaudio 6.0.0 - Miss Sissy Princess - 08-20-2019
Step one: Find out what it relates to. Go back to a completely stock installation of moOde 6.x.
Leave the EQ off.
Don't do any of the "it sounds better and I have no measurements to support that claim" tweaks or setting changes.
Put a revealing, well-recorded track on a local USB stick. Use an uncompressed format like FLAC or ALAC.
Play it. Does it have audible problems?
If there are audible problems:
1. Swap headphones, speakers, etc. to see if the problem tracks the transducers.
2. Try another DAC. Doesn't have to be a great one -- whatever USB DAC you have lying around (Audioquest Dragonfly, Objective DAC, Eiio, Topping, M-Audio, etc.). See if that improves things.
If it sounds good, then start changing things.
Turn on the EQ. Does that degrade the sound? (I'm with grasshopper -- I never use EQ and have no tone controls in my audio system).
Point moOde to wherever you normally keep your music (NAS, external hard drive, network share, etc.). Play the same track from there.
etc., etc., etc.
RE: Sound Quality Moodeaudio 6.0.0 - Jedrek - 08-21-2019
(08-20-2019, 09:52 PM)grasshopper Wrote: @Jedrek
I don't have your dac, but I can't see above any mention of music source, files from a NAS? Spotify? Tidal via uPnP etc? Alsa set to hardware or software? Could it be that you have a hardware and software volume? I don't use EQ at all ever, intact I have a button on my pre amp that disables bass and treble controls, Moode sounds great here.
I have a headphone only system also playing sources from a NAS and Spotify. No distortion.
If you have screenshots of your EQ settings post them maybe someone with the same dac can try and help.
I use only my own local audio sources in the form of a NAS or directly from a USB stick. The source does not matter, since nothing really changed in the moode audio environment except the program version (latest 5.x -> 6.0.0 -> 6.1.0)
My EQ settings are attached.
They worked perfectly in Moodeaudio 5.x (last version available)
RE: Sound Quality Moodeaudio 6.0.0 - Jedrek - 08-21-2019
(08-20-2019, 10:43 PM)fmaxwell Wrote: Step one: Find out what it relates to. Go back to a completely stock installation of moOde 6.x.
Leave the EQ off.
Don't do any of the "it sounds better and I have no measurements to support that claim" tweaks or setting changes.
Put a revealing, well-recorded track on a local USB stick. Use an uncompressed format like FLAC or ALAC.
Play it. Does it have audible problems?
If there are audible problems:
1. Swap headphones, speakers, etc. to see if the problem tracks the transducers.
2. Try another DAC. Doesn't have to be a great one -- whatever USB DAC you have lying around (Audioquest Dragonfly, Objective DAC, Eiio, Topping, M-Audio, etc.). See if that improves things.
If it sounds good, then start changing things.
Turn on the EQ. Does that degrade the sound? (I'm with grasshopper -- I never use EQ and have no tone controls in my audio system).
Point moOde to wherever you normally keep your music (NAS, external hard drive, network share, etc.). Play the same track from there.
etc., etc., etc.
I am sorry but I have the impression that you are writing nonsense. I don't have any USB DAC etc. etc.
RE: Sound Quality Moodeaudio 6.0.0 - Jedrek - 08-21-2019
Do you know why I prefer Moodeaudio over other projects?
Only years old that he has, and basically had a very good equalizer. Unfortunately, but the term "had" is in my opinion true, because since version 6.x something has been broken and this equalizer does not work as needed. Of course, you can change the equalizer parameters, which I did, but you won't get the sound bubbles that were in version 5.x
RE: Sound Quality Moodeaudio 6.0.0 - grasshopper - 08-21-2019
@Jedrek
I'll leave you to it, best of luck. I thought @fmaxwell wrote a very good helpful reply to troubleshoot your problem.
I'd suggest going back to the version you prefer.
RE: Sound Quality Moodeaudio 6.0.0 - Miss Sissy Princess - 08-21-2019
(08-21-2019, 07:11 PM)Jedrek Wrote:(08-20-2019, 10:43 PM)fmaxwell Wrote: Step one: Find out what it relates to. Go back to a completely stock installation of moOde 6.x.
Leave the EQ off.
Don't do any of the "it sounds better and I have no measurements to support that claim" tweaks or setting changes.
Put a revealing, well-recorded track on a local USB stick. Use an uncompressed format like FLAC or ALAC.
Play it. Does it have audible problems?
If there are audible problems:
1. Swap headphones, speakers, etc. to see if the problem tracks the transducers.
2. Try another DAC. Doesn't have to be a great one -- whatever USB DAC you have lying around (Audioquest Dragonfly, Objective DAC, Eiio, Topping, M-Audio, etc.). See if that improves things.
If it sounds good, then start changing things.
Turn on the EQ. Does that degrade the sound? (I'm with grasshopper -- I never use EQ and have no tone controls in my audio system).
Point moOde to wherever you normally keep your music (NAS, external hard drive, network share, etc.). Play the same track from there.
etc., etc., etc.
I am sorry but I have the impression that you are writing nonsense. I don't have any USB DAC etc. etc.
I'm sharing expertise and debugging skills that you clearly lack. There is nothing 'nonsensical' about the steps I provided to isolate the problem that you think you hear.
I've learned over the years that if someone just complains about a problem that no one else is reporting, and they are unwilling to do anything suggested to narrow down what is causing the alleged problem, they are unlikely to get much help.