+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: Bluetooth issues in Canada (/showthread.php?tid=6631)
Bluetooth issues in Canada - Jakekoe - 06-20-2024
Hello from Canada!
I've been a Moode user for about 2.5 years using a PecanPi hat on a Raspi 3B streaming music and also casting to it with the Bluetooth renderer.
All was good until I updated yesterday.
I can't remember what version I was on but it was about a year ago when I last updated. Unfortunately, I imaged the update over my old version on my SD and I can't seem to find the old versions online to go back to.
Since updating the Pi with both Moode 9.0.2 or 8.3.9, I've lost the ability to hear the Bluetooth output.
I can listen from the online radio stations fine but when I connect to Moode using Bluetooth, everything acts correctly but with no output.
I've connected via Bluetooth with 2 laptops, a Samsung A54 android, and an iPad. All devices connect and act like they're sending music to Moode but with no sound. I've also tried all these same devices to a JVC Bluetooth speaker and they all play fine.
I have the "resume MPD" on, so when I connect via Bluetooth, Moode pauses the radio stream and switches to a "Bluetooth Active" screen but with no output. I've also looked at all the volume controls on both the casting device as well as the Pi and tuner and all are turned up.
I'll also add that the Airplay function from the iPad isn't working any longer as well and since that's Bluetooth I'm feeling like it's a Pi thing or a setting in Moode?
I'm not that strong in the way of programing or coding so please spoon feed me any suggestions you might have.
I'm feeling like it's a switch or something I'm missing but I just can't figure this out.
I can't seem to attach a pdf of the system info but have it if that will be helpful
Thanks for your help!
RE: Bluetooth issues in Canada - Dorffen - 06-20-2024
Hi and welcome.
Kind regards
Rock
RE: Bluetooth issues in Canada - the_bertrum - 06-20-2024
Welcome.
Your bluetooth issue could be a simple as volume is your client connecting at zero volume and just needs turning up?
RE: Bluetooth issues in Canada - Tim Curtis - 06-20-2024
Very odd. Bluetooth usually just works.
To troubleshoot try the following:
1. Open an SSH terminal, either the built in WebSSH on System Config or an SSH app on your PC/Mac.
2. Establish a Bluetooth connection to moode from one of your clients
3. Start playback on your connected client
3. Run the commands below and post the output
Code:
moodeutl --hwparams
sudo moodeutl -d | grep vol
sudo moodeutl -d | grep bt
moodeutl -lRE: Bluetooth issues in Canada - Jakekoe - 06-20-2024
(06-20-2024, 10:29 AM)Tim Curtis Wrote: Very odd. Bluetooth usually just works.
To troubleshoot try the following:
1. Open an SSH terminal, either the built in WebSSH on System Config or an SSH app on your PC/Mac.
2. Establish a Bluetooth connection to moode from one of your clients
3. Start playback on your connected client
3. Run the commands below and post the output
Code:moodeutl --hwparams
sudo moodeutl -d | grep vol
sudo moodeutl -d | grep bt
moodeutl -l
OK, that was fun figuring out that wormhole...
Here's my output:
Code:
moode login: moode
Host: moode
Password:
RPiOS: 12.5 Bookworm 64-bit | Linux: 6.6.28 64-bit
Model: Pi-3B 1GB
Audio: HiFiBerry DAC
m o O d e a u d i o p l a y e r
Release 9.0.2 2024-06-12
(C) 2014 Tim Curtis
The programs included with moOde are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright or
in the moOde source files. moOde comes with absolutely
no warranties either expressed or implied, or any other
such guarantees.
** To change the password for your userid type 'passwd'.
moode@moode:~ $ moodeutl --hwparams
card 0: HiFiBerry DAC
access: MMAP_INTERLEAVED
format: S16_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)
period_size: 4410
buffer_size: 22050
moode@moode:~ $ sudo moodeutl -d | grep vol
clkradio_volume|10
volknob|54
volmute|0
alsavolume_max|100
alsavolume|none
camilladsp_volume_sync|off
volknob_mpd|-1
volknob_preamp|0
usb_volknob|0
volume_step_limit|10
volume_mpd_max|100
volume_db_display|1
camilladsp_volume_range|60
alsavolume_max_bt|100
cdspvolume_max_bt|0
moode@moode:~ $ sudo moodeutl -d | grep bt
fs_nfs_options|rw,sync,no_subtree_check,no_root_squash
rsmafterbt|1
p3bt|1
btsvc|1
btname|Moode Bluetooth
btactive|1
bt_pin_code|None
alsavolume_max_bt|100
cdspvolume_max_bt|0
alsa_output_mode_bt|_audioout
moode@moode:~ $ moodeutl -l
20240620 105608 worker: --
20240620 105609 worker: -- Start moOde 9 series
20240620 105609 worker: --
20240620 105609 worker: Successfully daemonized
20240620 105609 worker: Wait for Linux startup
20240620 105615 worker: Linux startup complete
20240620 105615 worker: Boot config is ok
20240620 105615 worker: Session loaded
20240620 105618 worker: Package locks applied
20240620 105619 worker: File check complete
20240620 105619 worker: Debug logging off
20240620 105619 worker: --
20240620 105619 worker: -- System
20240620 105619 worker: --
20240620 105622 worker: Host name: moode
20240620 105622 worker: RPi model: Pi-3B 1.2 1GB
20240620 105622 worker: moOde release: 9.0.2 2024-06-12
20240620 105622 worker: RaspiOS: 12.5 Bookworm 64-bit
20240620 105622 worker: Linux Kernel: 6.6.28 64-bit
20240620 105622 worker: MPD version: 0.23.14
20240620 105622 worker: User id: moode
20240620 105622 worker: Home folder: /home/moode
20240620 105622 worker: Time zone: America/Toronto
20240620 105622 worker: Kbd layout: us
20240620 105622 worker: HDMI ports(s): on
20240620 105622 worker: Sys LED0: on
20240620 105622 worker: Sys LED1: on
20240620 105622 worker: Reduce power: n/a
20240620 105622 worker: CPU governor: ondemand
20240620 105622 worker: Integ audio: vc4-kms-v3d
20240620 105622 worker: --
20240620 105622 worker: -- Network
20240620 105622 worker: --
20240620 105622 worker: Eth0
20240620 105622 worker: Ethernet: adapter exists
20240620 105622 worker: Ethernet: timeout off
20240620 105622 worker: Ethernet: method dhcp
20240620 105622 worker: Ethernet: address 192.168.2.109
20240620 105622 worker: Ethernet: netmask 255.255.255.0
20240620 105622 worker: Ethernet: gateway 192.168.2.1
20240620 105622 worker: Ethernet: pri DNS 192.168.2.1
20240620 105622 worker: Ethernet: domain home
20240620 105622 worker: Wlan0
20240620 105623 worker: Wireless: adapter exists
20240620 105623 worker: Wireless: country CA
20240620 105623 worker: Wireless: SSID SMOSS
20240620 105623 worker: Wireless: other None
20240620 105623 worker: Wireless: timeout up to 90 secs
20240620 105623 worker: Wireless: connect to SMOSS
20240620 105623 worker: Wireless: method dhcp
20240620 105623 worker: Wireless: address 192.168.2.98
20240620 105623 worker: Wireless: netmask 255.255.255.0
20240620 105623 worker: Wireless: gateway 192.168.2.1
20240620 105623 worker: Wireless: pri DNS 192.168.2.1
20240620 105623 worker: Wireless: domain home
20240620 105623 worker: --
20240620 105623 worker: -- File sharing
20240620 105623 worker: --
20240620 105623 worker: SMB file sharing: off
20240620 105623 worker: NFS file sharing: off
20240620 105623 worker: DLNA file sharing: off
20240620 105623 worker: --
20240620 105623 worker: -- Special configs
20240620 105623 worker: --
20240620 105623 worker: Plexamp: not installed
20240620 105623 worker: RoonBridge: not installed
20240620 105623 worker: Allo Piano 2.1: not detected
20240620 105623 worker: Allo Boss 2: not detected, OLED script ok
20240620 105623 worker: IQaudIO AMP*: not detected
20240620 105623 worker: --
20240620 105623 worker: -- ALSA debug
20240620 105623 worker: --
20240620 105623 worker: Cards: 0:sndrpihifiberry 1:vc4hdmi 2:empty 3:empty
20240620 105623 worker: 4:empty 5:empty 6:empty 7:empty
20240620 105623 worker: Mixers: 0:none 1:none 2:none 3:none
20240620 105623 worker: 4:none 5:none 6:none 7:none
20240620 105623 worker: --
20240620 105623 worker: -- Audio configuration
20240620 105623 worker: --
20240620 105623 worker: Audio device: 0:HiFiBerry DAC
20240620 105623 worker: ALSA card: has not been reassigned
20240620 105623 worker: MPD config: update not needed
20240620 105624 worker: ALSA output: I2S
20240620 105624 worker: ALSA mode: Default (plughw)
20240620 105624 worker: ALSA mixer none exists
20240620 105627 worker: ALSA volume: controller not detected
20240620 105627 worker: ALSA maxvol: 100%
20240620 105627 worker: ALSA loopback: off
20240620 105627 worker: MPD mixer Software
20240620 105627 worker: Audio formats: S16_LE, S24_LE, S32_LE
20240620 105627 worker: CamillaDSP: off
20240620 105627 worker: CDSP volume: 0dB
20240620 105627 worker: CDSP volrange: 60dB
20240620 105627 worker: --
20240620 105627 worker: -- MPD startup
20240620 105627 worker: --
20240620 105628 worker: MPD service: started
20240620 105628 worker: MPD port 6600: accepting connections
20240620 105628 worker: MPD ALSA Default: on
20240620 105628 worker: MPD ALSA Bluetooth: off
20240620 105628 worker: MPD HTTP Server: off
20240620 105628 worker: MPD volume: 52
20240620 105628 worker: Saved MPD vol: -1
20240620 105628 worker: Saved SRC vol: 0
20240620 105628 worker: MPD crossfade: off
20240620 105628 worker: MPD ignore CUE: no
20240620 105628 worker: MPD CDSP volsync: off
20240620 105628 worker: --
20240620 105628 worker: -- Music sources
20240620 105628 worker: --
20240620 105628 worker: USB drives: no drives found
20240620 105628 worker: NAS sources: no music sources defined
20240620 105628 worker: --
20240620 105628 worker: -- Feature availability
20240620 105628 worker: --
20240620 105628 worker: Input select: available, Source: MPD, Output: HiFiBerry DAC
20240620 105631 worker: Bluetooth: started, PIN: None, ALSA/CDSP maxvol: 100%/0dB, ALSA outmode: Standard
20240620 105631 worker: AirPlay: started
20240620 105631 worker: Spotify Connect: available
20240620 105631 worker: Squeezelite: available
20240620 105631 worker: UPnP client: available
20240620 105631 worker: Plexamp: not installed
20240620 105631 worker: RoonBridge: not installed
20240620 105631 worker: Multiroom: available
20240620 105631 worker: GPIO buttons: available
20240620 105631 worker: HTTPS mode: available
20240620 105631 worker: Stream recorder: n/a
20240620 105631 worker: --
20240620 105631 worker: -- Peripherals
20240620 105631 worker: --
20240620 105634 worker: Local display: off
20240620 105634 worker: On-screen kbd: off
20240620 105634 worker: HDMI 4K 60Hz: off
20240620 105634 worker: Rotary encoder: off
20240620 105634 worker: USB volume knob: off
20240620 105634 worker: LCD updater: off
20240620 105634 worker: --
20240620 105634 worker: -- Miscellaneous
20240620 105634 worker: --
20240620 105634 worker: Software update: Automatic check on
20240620 105634 worker: Software update: Checking for available update...
20240620 105635 worker: Software update: Software is up to date
20240620 105635 worker: Auto-CoverView: off
20240620 105635 worker: CoverView timeout: Never
20240620 105635 worker: Auto-shuffle: on
20240620 105635 worker: Auto-play: on, via playid 26
20240620 105635 worker: Web SSH server: on
20240620 105635 worker: Maintenance task: 360 mins
20240620 105635 worker: Current view: reset to Playback
20240620 105635 worker: Active flags: all false
20240620 105635 worker: Reset flags: skipped
20240620 105635 worker: Session check: ok
20240620 105635 worker: --
20240620 105635 worker: -- Startup complete
20240620 105635 worker: --
20240620 105635 worker: Mount monitor: started
20240620 105635 worker: Radio monitor: off
20240620 105636 worker: Watchdog monitor: started
20240620 105636 worker: Responsiveness: Default
20240620 105636 worker: Ready
20240620 122157 worker: Job shellinabox
20240620 124658 worker: Job airplaysvc
20240620 124719 worker: Job btsvc
20240620 124854 worker: Job shellinabox
20240620 125118 worker: Job mpdrestartRE: Bluetooth issues in Canada - Jakekoe - 06-20-2024
not sure why that one line shows a smiley face. It actually reads like:
20240620 105623 worker: Cards: 0
ndrpihifiberry 1:vc4hdmi 2:empty 3:empty
RE: Bluetooth issues in Canada - Jakekoe - 06-20-2024
ok seems the translation for an "s:" comes out as a smiley face on this forum?
Oh isn't getting old fun?
Thanks again for all your help!
RE: Bluetooth issues in Canada - Tim Curtis - 06-20-2024
I placed the log output in a code box for readability. The code box icon is on right side of the toolbar when creating or editing a post.
RE: Bluetooth issues in Canada - Tim Curtis - 06-20-2024
I don't see anything suspicious in the logs. All the settings look ok.
In the Bluetooth Control screen try setting ALSA output mode to "Compatibility"
RE: Bluetooth issues in Canada - Jakekoe - 06-21-2024
(06-20-2024, 09:43 PM)Tim Curtis Wrote: I don't see anything suspicious in the logs. All the settings look ok.
In the Bluetooth Control screen try setting ALSA output mode to "Compatibility"
Unfortunately that doesn’t affect it.
Are the older versions of Moode available to see if I can get it work again with a version from about a year ago?