+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: FAQ and Guides (https://moodeaudio.org/forum/forumdisplay.php?fid=9)
+--- Thread: Step by step guide for using IR remote with moOde (/showthread.php?tid=190)
Pages:
1
2
RE: Step by step guide for using IR remote with moOde - kwijibo - 02-16-2024
Great step by step!
Still works very well under moOde 8.3.8 on pi4, pi-dac pro audio IQ, TSOP4838 and justboom remote control.
Thank you for sharing Drone7
RE: Step by step guide for using IR remote with moOde - PeterLustig33 - 02-29-2024
Hello everyone,
I need your support. I am trying to install an IR remote control with moOde.
Everything works up to the point "ls /var/run/lirc/"
At this point "mode2 -d /dev/lirc0" I see the raw data.
There is a ready-made template for my remote control which I have entered in "lircrc.conf".
Everything works up to the point "ls /var/run/lirc/"
The test with "irw" and "irexec" unfortunately shows nothing. I suspect that no mapping of the raw data with the values in the "lircrc.conf" does not work.
What am I doing wrong, or where can I check the process?
Thanks and best regards
Peter
RE: Step by step guide for using IR remote with moOde - PeterLustig33 - 02-29-2024
I'll answer myself. On the 5th new attempt, it suddenly worked. This time I followed these instructions for the installation: https://moodeaudio.org/forum/showthread.php?tid=187&pid=19197#pid19197
I then continued here for the configuration. Everything is working now.