![]() |
[PROBLEM] Moode Player 6.5.2 hanged after finishing a Playlist - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7) +--- Thread: [PROBLEM] Moode Player 6.5.2 hanged after finishing a Playlist (/showthread.php?tid=2547) Pages:
1
2
|
RE: Moode Player 6.5.2 hanged after finishing a Playlist - TheOldPresbyope - 05-21-2020 Just finished the real git-bisect process. To cut to the chase, here's the output (where, in our context, "git bisect good" means the last of the succession of bisect builds led to a working mpd/bluez-alsa setup and "first bad commit" identifies the first commit which leads to a non-working mpd/bluez-alsa setup): Code: pi@moode3b:~/MPD $ git bisect good I'll set up a clean-room Raspbian system to see what I can see. Regards, Kent RE: Moode Player 6.5.2 hanged after finishing a Playlist - ElmhurstFun - 05-22-2020 (05-19-2020, 03:46 PM)dml3334 Wrote:(05-19-2020, 01:12 PM)Tim Curtis Wrote: After some testing this morning I can confirm that for the use case MPD -> BT Speaker when last song in Playlist ends MPD never generates an idle timeout event. It remains in its idle loop and refuses to process any protocol commands. This could be due to either an MPD bug or a bluez-alsa bug. I have no way of knowing. The other 'workaround' other than adding a radio at the end of the playlist which has worked for me is to set the playlist to 'repeat'. It seems to successfully loop back to the first song and not hang. RE: Moode Player 6.5.2 hanged after finishing a Playlist - Tim Curtis - 05-25-2020 Compliments of @TheOldPresbyope the issue was isolated to blues-alsa. The latest version 2.1.0 fixes it and will be included in upcoming moOde 6.6.0 release :-) -Tim RE: Moode Player 6.5.2 hanged after finishing a Playlist - dml3334 - 05-26-2020 (05-25-2020, 03:06 PM)Tim Curtis Wrote: Compliments of @TheOldPresbyope the issue was isolated to blues-alsa. The latest version 2.1.0 fixes it and will be included in upcoming moOde 6.6.0 release :-) @TheOldPresbyope and @Tim Curtis, thank you very much for debugging it. I'm eager to have it solved ![]() |