(04-29-2021, 03:24 PM)katariat Wrote: Hi bitlab, looking for your help as well. Got the reference from gingerbeer, i am having similar issues and have tried to follow most of the recommendations but still cant seem to make moOde / Camilladsp to work.

my current step up - rasp pi, flashed the current moOde version (7.1) , creative xi fi 5.1 sound card. The intent is to create a 6 channel crossover + parametric eq etc

My past efforts to use camilladsp have been mixed...but they have been on another SBC (Rock64) with my creative sound card. I was able to make it work but with pulse and never using alsa.

This is what i did and still getting error message
- flashed the latest moOde 7.1
- set the MPD to Pi HDMI, the Mpd restarted
- went to audio settings, copied flat and renamed ....and when i click on check...it says its not a valid yml file
- went to the pipeline editor...made some changes
. . . . .went to capture device section, changed sample format to S16LE and get an error message that "500 Internal Server Error Server got itself in trouble"
can post logs record, playback details...

would greatly appreciate your help and guidance. Best

• If you have time please reinstall moOde with a fresh 7.2 (released today, and fixes some of the camilladsp configuration issues :-)
  
• Do only the minimal configuration to have sound (use the standard supplied test track on the sd card and don't use camilladsp yet)
  
• If you have sound, switch to the flat configuration (read previous posts above send from me to @gingerbeer on howto)
  
• And let us now the results
  
• If case you don't have sound, switch to the headphone or hdmi output to verify correct working of moOde vs your soundcard.
  

• the same log outputs as @gingerbeer did on the first post of this thread?
  
• and also the output of the command 'cat /usr/share/camilladsp/working_config.yml'
  

1. The cat of the camilladsp config isn't from the default flat config. If show a configures 10 band peq.
   
2. If this is the actual file content concerning whitespace, because this config isn't valid (you can use the check button to verify). Is this file maybe edit manually, because starting from line 117 is yml format is incorrect?
    (If I use this config in my system I would get the same error as in your mpd.log)
   
3. The output of moode -l shows no active camilladsp config, so I assume that this output isn't captured while the flat config is active.
   

1. fresh install 7.2 (no customizing at all)
   
2. select headphone output and save it
   
3. set the volume to a normal level (default is 0%)
   
4. play the default supplied 'stereo test' track to verify sound
   
5. in the quick configure menu select camilladsp
   
6. select the 'flat' config
   
7. press save
   
8. again play the default supplied 'stereo test' track to verify sound
   

Quote:---
devices:
  samplerate: 44100
  chunksize: 1024
  queuelimit: 1
  capture:
    type: File
    channels: 2
    filename: /dev/stdin
    format: S16LE
  playback:
    type: Alsa
    channels: 2
    device: hw:1,0
    format: S16LE
mixers:
  stereo:
    channels:
      in: 2
      out: 2
    mapping:
    - dest: 0
      sources:
      - channel: 0
        gain: -3
        inverted: false
    - dest: 1
      sources:
      - channel: 1
        gain: -3
        inverted: false
pipeline:
- type: Mixer
  name: stereo
...
cat: command: No such file or directory

• the date differs 5 days with the mpd log?
  
• HDMI is active:
  20210429 162004 worker: MPD config: (0i HDMI 1 | mixerHDMI) | card:0)
  20210429 162005 worker: ALSA mixer actual (HDMI)
  

• CamillaDSP is off:
  20210429 162018 worker: CamillaDSP (off)
  

• under mpd setting enabled logging verbose (the option is at the bottom)
  
• select the flat config + save again
  
• run the command:
  moodeutl -r
  
• run the following command from the cmdline to enable extra log info for camilladsp:
  sudo sed -i 's/#        -v/        -v/g' /etc/alsa/conf.d/camilladsp.conf
  (lateron you can disable it again with:   sudo sed -i 's/        -v/#        -v/g' /etc/alsa/conf.d/camilladsp.conf  )
  
• try to start a song and post the output of the /var/log/mpd/log: