(07-04-2023, 04:21 PM)pkdick Wrote:

(06-30-2023, 06:35 PM)TheOldPresbyope Wrote: @pkdick 

What Tim said.

As well, the filesystem info we were looking at in that particular stanza is parsed by the moOde sysinfo.sh script from the output of the Linux df command. Could you please go to your moOde player's command line (either using moOde's Web SSH terminal or by ssh'ing from another host), execute the following two commands, and report the results?

Code:

df -h
lsblk

Here, for example, is what I get on the 32-bit moOde 8.3.3 player I mentioned before,

Code:

pi@moode:~ $ df -h
Filesystem             Size  Used Avail Use% Mounted on
/dev/root              3.4G  2.7G  545M  84% /
devtmpfs               182M     0  182M   0% /dev
tmpfs                  214M     0  214M   0% /dev/shm
tmpfs                   86M  936K   85M   2% /run
tmpfs                  5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1         253M   51M  202M  20% /boot
tmpfs                   43M     0   43M   0% /run/user/1000
10.0.0.2:/export/Test  230G  161G   69G  70% /mnt/NAS/OMV-Test
pi@moode:~ $ lsblk
NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
mmcblk0     179:0    0  3.7G  0 disk
├─mmcblk0p1 179:1    0  256M  0 part /boot
└─mmcblk0p2 179:2    0  3.5G  0 part /

The moOde script is looking specifically for a "/dev/root" entry.

Regards,
Kent

Hello Kent,

Sorry for the delay.

Please find the info you asked from me (it seems exactly the same as you).

For Tim: my µSD size is 64 GB.

Thank you for your support!

(07-07-2023, 09:16 AM)pkdick Wrote: Hello Tim,

I understand that there is something wrong in my setup: is it possible to work out the configuration or do I have to wipe out my setup and to start it again ?

Thank you for your support!

Best regards,

• During te COVID Lockdown, I built a Moode setup, and I wanted to display a splashscreen during Moode's boot,
  
• I tried many proposed solutions (I asked for solutions in the Moode's Forum) but I found none of them to be really satisfying (the splashscreen's display time was not long enough with respect to the boot's time and there was always a "black screen" during boot),
  
• I found someone apparently proposing a "simple" solution (just a line in the config.txt file as described in https://gitlab.com/DarkElvenAngel/initramfs-splash) and when I tested it, I found that the display time was longer than the other solutions.
  

(08-27-2023, 07:52 AM)pkdick Wrote: Dear all,

This message to inform you that I eventually found why my setup was not able to update it's self:

• During te COVID Lockdown, I built a Moode setup, and I wanted to display a splashscreen during Moode's boot,
  
• I tried many proposed solutions (I asked for solutions in the Moode's Forum) but I found none of them to be really satisfying (the splashscreen's display time was not long enough with respect to the boot's time and there was always a "black screen" during boot),
  
• I found someone apparently proposing a "simple" solution (just a line in the config.txt file as described in https://gitlab.com/DarkElvenAngel/initramfs-splash) and when I tested it, I found that the display time was longer than the other solutions.
  

As I am not a linux programmer, I did not realize that the use of this solution (maybe due to a bug) removed the /dev/root directory and when I removed "initramfs initramfs.img" then after reboot, all was set as normal.

Thank you for your support: the analysis done by Tim and Ken put my on the right track.

Best regards,