+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [SOLVED] MPD Error (/showthread.php?tid=6123)
RE: MPD Error - Nutul - 01-09-2024
(01-08-2024, 11:20 PM)Tim Curtis Wrote: @Nutul I2S audio devices are all configured via Audio Config. The should never be a need to manually edit the boot files :-0
I do agree, but I also have to trust what the hardware manufacturer tells me to do to have it working...
If something can be done in audio config that leads to the same result, that's the proper way, of course.
RE: MPD Error - joecurtis - 01-09-2024
My board is a new one purchased around Christmas from The Pi-Hut one of the recommended supliers. I notice that is doesn't show up in AlSA slot 0.
RE: MPD Error - Tim Curtis - 01-09-2024
(01-09-2024, 01:06 PM)joecurtis Wrote: My board is a new one purchased around Christmas from The Pi-Hut one of the recommended supliers. I notice that is doesn't show up in AlSA slot 0.
If it's this board the spec sheet states compatible with "3B, 4B, Zero 2". Maybe it won't work on a 2B?
https://thepihut.com/products/iqaudio-digiamp
This version of the board has a spec that states "The Raspberry Pi DigiAMP+ is compatible with any Raspberry Pi computer that has a 40-pin GPIO header"
https://www.raspberrypi.com/products/digiamp-plus/
RE: MPD Error - joecurtis - 01-09-2024
I have tried it on a 3B and got the same result and both my 2B and 3B have 40-pin GPIO headers (unless I can't count). I will try it on the 3B with a 64bit OS ( I had previously used the sd from the 2B. Failing that I also have a 4 and a 5 to try! For the record I am using a 19v 3.5A power supply.
RE: MPD Error - ColinM - 01-10-2024
(01-09-2024, 01:14 PM)Tim Curtis Wrote: If it's this board the spec sheet states compatible with "3B, 4B, Zero 2". Maybe it won't work on a 2B?
https://thepihut.com/products/iqaudio-digiamp
This version of the board has a spec that states "The Raspberry Pi DigiAMP+ is compatible with any Raspberry Pi computer that has a 40-pin GPIO header"
https://www.raspberrypi.com/products/digiamp-plus/
I have two players using the first version (from PiHut), one on a Zero W and one on a 3B+, both working happily with the latest moOde release.
Colin
RE: MPD Error - joecurtis - 01-10-2024
I have tried a variety of combinations and have concluded that the Pi-DigiAMP+ card must be faulty as it is not being recognised by the software . I have applied to the suppliers for a replacement!
Many thanks to Tim and all the others for trying to assist me.
RE: MPD Error - LordShadow - 01-13-2024
mpd error permission denied
I just started getting this and now am unable to listen to literally anything
Anyone want to throw a guy a bone and perhaps tell me what I can do to troubleshoot and or fix this? I was so loving listening to my music again!
RE: MPD Error - Nutul - 01-13-2024
(01-13-2024, 06:20 AM)LordShadow Wrote: mpd error permission denied
I just started getting this and now am unable to listen to literally anything
Anyone want to throw a guy a bone and perhaps tell me what I can do to troubleshoot and or fix this? I was so loving listening to my music again!
It could be MPD has no access to the folder where your music files are.
can you try the following command from an ssh session, so we can check permissions:
ls -l /media/
(better copy-paste it, anyway those are lowercase "L", not capital "i")
Post the result here, preferably in a code block
RE: MPD Error - LordShadow - 01-13-2024
THank you @Nutul I will give it a try next time it happens. I had to do a full reinstall 2x but the issue seems good for the present.
I sincerely appreciate you replying.
I was really confused since it worked fine just an hour beforehand. the drive in question is an m.2 on a geeekPi board into the Pi via usb3 port.
RE: MPD Error - Nutul - 01-13-2024
(01-13-2024, 06:18 PM)LordShadow Wrote: THank you @Nutul I will give it a try next time it happens. I had to do a full reinstall 2x but the issue seems good for the present.This makes things a little different... in this case it cannot be a permissions problem.
I sincerely appreciate you replying.
If it happens again you better post some logs. Also system logs, not only mpd's.