+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: Audiophile (https://moodeaudio.org/forum/forumdisplay.php?fid=32)
+--- Forum: Audio gear (https://moodeaudio.org/forum/forumdisplay.php?fid=10)
+--- Thread: Nvarcher ES9038Q2m Raspberry Pi DAC hat (/showthread.php?tid=5347)
RE: Nvarcher ES9038Q2m Raspberry Pi DAC hat - kuyadreiph - 04-19-2024
(04-18-2024, 05:18 PM)Tim Curtis Wrote:(04-18-2024, 02:09 PM)kuyadreiph Wrote: Hi devs!
I'm newbie here, i just want to say thank you for accepting me in this forum, and i don't know if this is the right thread.
I just want to know if i can add my st400 dac hat pcm5122 to the i2s output on moode webui. Coz i couldn't find it.
Rpi 4 b 8gb ram /4gb ram
Moode latest ver.
Dac hat st400 pcm5122 i bought it here (Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B https://a.co/d/2BL6VXn)
Thanks,
What I2S driver does the manufacturer specify for the device?
I'm good now dev. It is working now the i2s driver for my st400 dac hat is suptronics x400.
However i couldn't find a thread that helping me to install spotify.
Nvarcher ES9038Q2m Raspberry Pi DAC hat - thomaschan - 04-19-2024
After successfully DIY the TDA1387 x 8 DAC to work with MoOde on Pi4B, I am planning to use my generic ES9038Q2M DAC board as another option. It has been sitting around collecting dust for a while and I'd like to make some use of it.
Same as the TDA1387, this board has I2S interface. I suppose interfacing with Pi4B is the same via LRCK, BCLK, DATA and GND. I can either use the DC 5V from Pi4B or external power supply for this DAC.
Question: In the MoOde Audio Configuration, which DAC should I select?
RE: Nvarcher ES9038Q2m Raspberry Pi DAC hat - Tim Curtis - 04-19-2024
What driver does the vendor specify for the device?
Nvarcher ES9038Q2m Raspberry Pi DAC hat - thomaschan - 04-20-2024
(04-19-2024, 10:22 AM)Tim Curtis Wrote: What driver does the vendor specify for the device?
I bought it 2 years ago and the vendor was selling it as an individual DAC card, not as a Pi Hat. Hence it did not specify any particular driver needed.
RE: Nvarcher ES9038Q2m Raspberry Pi DAC hat - TheOldPresbyope - 04-20-2024
(04-20-2024, 01:49 AM)thomaschan Wrote:(04-19-2024, 10:22 AM)Tim Curtis Wrote: What driver does the vendor specify for the device?
I bought it 2 years ago and the vendor was selling it as an individual DAC card, not as a Pi Hat. Hence it did not specify any particular driver needed.
You could try the Allo Katana DAC driver. Some Allo-specific settings may not be opearative/accessible but it it another ES9038Q2M-based board. My Inno-Maker HiFiBerry DAC Pro HAT contains the same DAC and works with this driver.
Nothing ventured, nothing gained.
Regards,
Kent
RE: Nvarcher ES9038Q2m Raspberry Pi DAC hat - Klangraum - 05-22-2025
(01-31-2023, 09:15 AM)romain Wrote: Hello,
has anyone already tried this board please ? https://www.aliexpress.com/item/1005004432757743.html
Thanks in advance,
Romain
It`s a long time ago, but the Board is still avaiable. Works fine, not tested the I2S(Hdmi)Port, and the Spdif(Coax)Port Input. All other Outputs run fine (Toslink, Headphone, RCA/Chinch, Coax). Configuration on the Board itself is possible but not necessary. Driver of the HifiBerry DAC works fine (think some time ago i also tested one of the Audiophonics ESS and that was also working till to a update).
Sounds good for such a cheap Board (actually around 50Bucks) with so much Connection options. For a ESS Chip not with this tiring neutral, cold sound, but i have also not tested it yet on my big boxes, only over headphones directly on the 3.5 Jack, or without the Chip over Toslink to my R2R DAC.