![]() |
[How to do instruction] Sound Tweaks Now on GitHub - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: FAQ and Guides (https://moodeaudio.org/forum/forumdisplay.php?fid=9) +--- Thread: [How to do instruction] Sound Tweaks Now on GitHub (/showthread.php?tid=901) |
RE: Sound Tweaks Now on GitHub - IT-Andy52 - 03-04-2019 Hi alternate method worked perfect for me. First thing after first listening: I checked if I still have the same speaker ![]() Phantasic clear "dry" sound. Thx for sharing these improvements to a already phantasic moode...... RE: Sound Tweaks Now on GitHub - Edward - 03-05-2019 (03-04-2019, 10:34 AM)IT-Andy52 Wrote: Hi Glad you like it...enjoy ![]() BTW, the files/changes should be persistent even after an update. I've updated the OS in MoOde, worked fine. Other players were able to update from one Rev to the next and all was well too. RE: Sound Tweaks Now on GitHub - edwingoh - 03-06-2019 Hi Edward, Does your script require to include the parameters in the /boot/config.txt found in this thread, http://moodeaudio.org/forum/showthread.php?tid=749? Ed RE: Sound Tweaks Now on GitHub - Edward - 03-06-2019 (03-06-2019, 12:27 PM)edwingoh Wrote: Hi Edward, No, I didn't add any boot config parameters only because I could not actually hear an audible difference, plus in some cases, aggressive settings might make peoples Rpi's unstable. RE: Sound Tweaks Now on GitHub - edwingoh - 03-07-2019 (03-06-2019, 12:59 PM)Edward Wrote:(03-06-2019, 12:27 PM)edwingoh Wrote: Hi Edward, Yes, this is exactly why I asked because if the arm or core frequencies are set too low, the DSD playback stutters at times. RE: Sound Tweaks Now on GitHub - Edward - 03-07-2019 (03-07-2019, 05:32 AM)edwingoh Wrote:(03-06-2019, 12:59 PM)Edward Wrote:(03-06-2019, 12:27 PM)edwingoh Wrote: Hi Edward, Ahhhhhhh, testing me..... Did I validate my credibility? ![]() RE: Sound Tweaks Now on GitHub - edwingoh - 03-08-2019 Of course I am not testing you. ;-) I happen to see another thread from you discussing on the parameters in the config file. Latest: Strange thing is music stops abruptly and the Pi2B is unable to get the Soekris DAM 1121 to resync. It happened 3 times after I made the changes. I have reverted the original configuration by using the remove.sh script. When I am brave again, I will re-install and see if the issue happens. This time I will look into the logs. P.S.: my config file includes slowing down some of the frequencies, e.g. video, RAM, etc but not the core or arm frequencies. RE: Sound Tweaks Now on GitHub - edwingoh - 03-13-2019 More tests but my DAM 1121 goes out of sync as well, sorry Edward, it isn’t your script. Will have to investigate further. RE: Sound Tweaks Now on GitHub - Edward - 03-13-2019 (03-13-2019, 12:44 AM)edwingoh Wrote: More tests but my DAM 1121 goes out of sync as well, sorry Edward, it isn’t your script. Will have to investigate further. Well thats good to know, but bad that its still happening. Did you Google around to see if others were having the same problem with the DAM and RPi? I remember my M2tech device didn't like the RPi either RE: Sound Tweaks Now on GitHub - edwingoh - 04-08-2019 Some more investigative work over several weekends by swapping power supply modules. Found the culprit: the Salas UBiB supplying to the 5V digital rails was probably dipping below the acceptable level as it warms up. I increased it ever slightly above 5V and it has been stable ever since. Put back Edward's audio improvement scripts and all is good. For those who have not tried it, don't wait anymore. ;-) |