+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Feature requests (https://moodeaudio.org/forum/forumdisplay.php?fid=8)
+--- Thread: [IDEA] Polarity Flip (/showthread.php?tid=221)
RE: Polarity Flip - DRONE7 - 01-17-2019
Discovered another reason a balance control would be helpful..... Allo kali and piano dac in dual mono has channel imbalance....seems to be a common complaint with this combination.
Any progress with polarity flip ? balance ?
RE: Polarity Flip - michaelagiles - 01-18-2019
Still hoping for polarity flip! I hear every day what is incorrect polarity.
And balance! I have been scheming about how to do this with my DIY buffer for months!
No way my room will get balanced!
MG
RE: Polarity Flip - DRONE7 - 01-18-2019
Balance can be set using alsamixer via ssh.....there are keyboard controls for increasing/decreasing each channel and iirc it can be made to stick over reboots.
Still, it would be nice to have this exposed in the MoOde interface....
RE: Polarity Flip - jonners - 01-18-2019
(01-17-2019, 11:44 PM)DRONE7 Wrote: Discovered another reason a balance control would be helpful..... Allo kali and piano dac in dual mono has channel imbalance....seems to be a common complaint with this combination.
I seem to remember that this could be corrected by a reboot?
RE: Polarity Flip - g.vanzundert@chello.nl - 03-02-2019
(06-01-2018, 09:03 PM)azimuth Wrote: I am hoping this is a pretty easy one. There is already DSP for EQ, Crossfeed, and such.
Just wanting a polarity flip. Just a simple request, but it would also be nice just to flip L and R independently.
Not sure if Sox or some other add-in has something that can do this.
Hi Azimuth,
I assume that you mean to reverse the polarity on the right or the left channel.
To get this done, I am using Goldwave as a sound editor to reach this.
This is to reverse one channel in American Recordings.
Cor van Zundert.
RE: Polarity Flip - Tim Curtis - 03-20-2019
Hi,
I've been successful at getting an ALSA polarity inversion working for MPD output but I'm not able to hear any difference in SQ and so I'm not sure how to confirm that the sound waves on each channel have actually been +/- inverted.
How does one verify polarity inversion?
-Tim
RE: Polarity Flip - DRONE7 - 03-20-2019
Perhaps this for cheap and easy in the absence of test gear...
https://play.google.com/store/apps/details?id=com.dwa_ict.polaritychecker&hl=en
RE: Polarity Flip - Tim Curtis - 03-20-2019
It just dawned on me that inverting the polarity of only one of the channels should produce a dramatic reduction in sound output and in fact it does. This confirms the ALSA code is working :-)
To be clear, the ALSA code is multiplying the signal on each channel by -1 which results in the waveform on each channel being flipped upside down. This is not phase shift where the waveforms are moved forward or back in time by a certain amount.
I'll plan to add the setting to the MPD section of Audio Config for moOde 5 :-)
RE: Polarity Flip - michaelagiles - 03-21-2019
Wonderful news!
Thanks!
It is not always apparent on all material, but when it is - it is obvious.
RE: Polarity Flip - DRONE7 - 03-22-2019
Is the polarity flip applicable on a track by track basis or is it a global setting ?