+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: Audiophile (https://moodeaudio.org/forum/forumdisplay.php?fid=32)
+--- Forum: Audio gear (https://moodeaudio.org/forum/forumdisplay.php?fid=10)
+--- Thread: [PROBLEM] Holo Spring 2 DAC (/showthread.php?tid=1063)
Holo Spring 2 DAC - hellojohn777 - 02-05-2019
Hello! Everyone,
Recently, I got a Holo Spring 2 DAC and attempted to connect pi3 with i2s via HDMI (i2s specification). There is no "Holo Spring 2 DAC" under i2s audio device in Moode. I tried almost all i2s devices available in the list but no lucks. Is there any compatible devices supported or any workarounds?
Thanks
John
RE: Holo Spring 2 DAC - jonners - 02-05-2019
Isn't that a USB DAC??
RE: Holo Spring 2 DAC - hellojohn777 - 02-05-2019
Holo Spring 2 DAC comes with various input interfaces (USB, COAXIAL, AES, OPTICAL, HDMI). The problem I have is HDMI.
RE: Holo Spring 2 DAC - Tim Curtis - 02-05-2019
(02-05-2019, 10:28 AM)hellojohn777 Wrote: Hello! Everyone,
Recently, I got a Holo Spring 2 DAC and attempted to connect pi3 with i2s via HDMI (i2s specification). There is no "Holo Spring 2 DAC" under i2s audio device in Moode. I tried almost all i2s devices available in the list but no lucks. Is there any compatible devices supported or any workarounds?
Thanks
John
Raspberry Pi does not support I2S over its HDMI port. You will have to get some sort of I2S-to-HDMI converter board that can be connected to the Pi.
The devices in moOde's I2S device list connect to the 40-pin header on the Raspberry Pi and use the GPIO pins that carry the I2S signal.