+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: 5.3.1 does not play radios (/showthread.php?tid=1493)
5.3.1 does not play radios - feh123 - 06-30-2019
Hi
I have just installed 5.3.1 on a RPI 3 connected to a WDMyCloud NAS and a Naim streamer. The system plays my music very well.
However, and after searching for solutions online, I cannot get any of the radio stations to play. I get the same on screen error message "curl failed to decode: [radio station ip address] unable to connect to server.
For info I use a Netgear router in modem only mode (it does the DHCP) and the RPI is wired to this router.
I copy paste the moode.log for today info - you can see it was playing my music okay but when I tried to play bbc radio 3 - I get the error.
Any help appreciated.
20190630 033906 worker: Maintenance completed
20190630 080432 worker: Job netcfg
20190630 081439 worker: Job netcfg
20190630 083203 worker: Job netcfg
20190630 083913 worker: Job upnpsvc
20190630 084617 worker: Job upnpsvc
20190630 084638 worker: Job upnpsvc
20190630 092448 waitWorker(): Start (sys-config, w_active=0)
20190630 092448 waitWorker(): End (sys-config, w_active=0)
20190630 092451 engine-mpd: Get initial status
20190630 092451 engine-mpd: UI state=(undefined), MPD state=(play)
20190630 092451 engine-mpd: Generating enhanced metadata
20190630 092451 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNAS%2FBach%20-%20Keyboard%20Concertos%20Nos.%201%2C%202%20%26%204%2F01%20-%20Bach%2C%20J%20S%20-%20Keyboard%20Concerto%20No.%201%20in%20D%20minor%2C%20BWV%201052%20-%20I.%20Allegro.flac)
20190630 092451 enhanceMetadata(): Song file
20190630 092451 engine-mpd: Metadata returned to client: Size=(33)
20190630 092451 engine-mpd: Get initial status
20190630 092451 engine-mpd: UI state=(play), MPD state=(play)
20190630 092451 engine-mpd: Wait for idle timeout
20190630 092500 engine-mpd: Get initial status
20190630 092500 engine-mpd: UI state=(undefined), MPD state=(play)
20190630 092500 engine-mpd: Generating enhanced metadata
20190630 092500 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNAS%2FBach%20-%20Keyboard%20Concertos%20Nos.%201%2C%202%20%26%204%2F01%20-%20Bach%2C%20J%20S%20-%20Keyboard%20Concerto%20No.%201%20in%20D%20minor%2C%20BWV%201052%20-%20I.%20Allegro.flac)
20190630 092500 enhanceMetadata(): Song file
20190630 092500 engine-mpd: Metadata returned to client: Size=(33)
20190630 092500 loadLibrary(): Cache data returned to client
20190630 092501 engine-mpd: Get initial status
20190630 092501 engine-mpd: UI state=(play), MPD state=(play)
20190630 092501 engine-mpd: Wait for idle timeout
20190630 092510 engine-mpd: Idle timeout event=(changed: player)
20190630 092510 engine-mpd: Get new status
20190630 092510 engine-mpd: Idle timeout event=(changed: player)
20190630 092510 engine-mpd: Get new status
20190630 092510 engine-mpd: Generating enhanced metadata
20190630 092510 engine-mpd: Generating enhanced metadata
20190630 092510 mediainfo --Inform="Audio;file:///var/www/mediainfo.tpl" "/var/lib/mpd/music/NAS/NAS/Bach - Keyboard Concertos Nos. 1, 2 & 4/02 - Bach, J S - Keyboard Concerto No. 1 in D minor, BWV 1052 - II. Adagio.flac"
20190630 092510 mediainfo --Inform="Audio;file:///var/www/mediainfo.tpl" "/var/lib/mpd/music/NAS/NAS/Bach - Keyboard Concertos Nos. 1, 2 & 4/02 - Bach, J S - Keyboard Concerto No. 1 in D minor, BWV 1052 - II. Adagio.flac"
20190630 092510 mediainfo --Inform="Audio;file:///var/www/mediainfo.tpl" "/var/lib/mpd/music/NAS/NAS/Bach - Keyboard Concertos Nos. 1, 2 & 4/02 - Bach, J S - Keyboard Concerto No. 1 in D minor, BWV 1052 - II. Adagio.flac"
20190630 092510 mediainfo --Inform="Audio;file:///var/www/mediainfo.tpl" "/var/lib/mpd/music/NAS/NAS/Bach - Keyboard Concertos Nos. 1, 2 & 4/02 - Bach, J S - Keyboard Concerto No. 1 in D minor, BWV 1052 - II. Adagio.flac"
20190630 092510 mediainfo --Inform="Audio;file:///var/www/mediainfo.tpl" "/var/lib/mpd/music/NAS/NAS/Bach - Keyboard Concertos Nos. 1, 2 & 4/02 - Bach, J S - Keyboard Concerto No. 1 in D minor, BWV 1052 - II. Adagio.flac"
20190630 092511 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNAS%2FBach%20-%20Keyboard%20Concertos%20Nos.%201%2C%202%20%26%204%2F02%20-%20Bach%2C%20J%20S%20-%20Keyboard%20Concerto%20No.%201%20in%20D%20minor%2C%20BWV%201052%20-%20II.%20Adagio.flac)
20190630 092511 enhanceMetadata(): Song file
20190630 092511 engine-mpd: Metadata returned to client: Size=(34)
20190630 092511 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNAS%2FBach%20-%20Keyboard%20Concertos%20Nos.%201%2C%202%20%26%204%2F02%20-%20Bach%2C%20J%20S%20-%20Keyboard%20Concerto%20No.%201%20in%20D%20minor%2C%20BWV%201052%20-%20II.%20Adagio.flac)
20190630 092511 enhanceMetadata(): Song file
20190630 092511 engine-mpd: Metadata returned to client: Size=(34)
20190630 092511 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNAS%2FBach%20-%20Keyboard%20Concertos%20Nos.%201%2C%202%20%26%204%2F02%20-%20Bach%2C%20J%20S%20-%20Keyboard%20Concerto%20No.%201%20in%20D%20minor%2C%20BWV%201052%20-%20II.%20Adagio.flac)
20190630 092511 enhanceMetadata(): Song file
20190630 092511 engine-mpd: Metadata returned to client: Size=(34)
20190630 092511 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNAS%2FBach%20-%20Keyboard%20Concertos%20Nos.%201%2C%202%20%26%204%2F02%20-%20Bach%2C%20J%20S%20-%20Keyboard%20Concerto%20No.%201%20in%20D%20minor%2C%20BWV%201052%20-%20II.%20Adagio.flac)
20190630 092511 enhanceMetadata(): Song file
20190630 092511 engine-mpd: Metadata returned to client: Size=(34)
20190630 092511 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNAS%2FBach%20-%20Keyboard%20Concertos%20Nos.%201%2C%202%20%26%204%2F02%20-%20Bach%2C%20J%20S%20-%20Keyboard%20Concerto%20No.%201%20in%20D%20minor%2C%20BWV%201052%20-%20II.%20Adagio.flac)
20190630 092511 enhanceMetadata(): Song file
20190630 092511 engine-mpd: Metadata returned to client: Size=(34)
20190630 092512 engine-mpd: Get initial status
20190630 092512 engine-mpd: UI state=(play), MPD state=(stop)
20190630 092512 engine-mpd: Generating enhanced metadata
20190630 092512 enhanceMetadata(): Radio station
20190630 092512 engine-mpd: Metadata returned to client: Size=(30)
20190630 092512 engine-mpd: Get initial status
20190630 092512 engine-mpd: UI state=(play), MPD state=(stop)
20190630 092512 engine-mpd: Generating enhanced metadata
20190630 092512 enhanceMetadata(): Radio station
20190630 092512 engine-mpd: Metadata returned to client: Size=(30)
20190630 092515 engine-mpd: Get initial status
20190630 092515 engine-mpd: UI state=(stop), MPD state=(stop)
20190630 092515 engine-mpd: Wait for idle timeout
20190630 092516 engine-mpd: Idle timeout event=(changed: player)
20190630 092516 engine-mpd: Get new status
20190630 092516 engine-mpd: Generating enhanced metadata
20190630 092516 enhanceMetadata(): Radio station
20190630 092516 engine-mpd: Metadata returned to client: Size=(31)
20190630 092518 engine-mpd: Get initial status
20190630 092518 engine-mpd: UI state=(stop), MPD state=(stop)
20190630 092518 engine-mpd: Wait for idle timeout
20190630 092519 engine-mpd: Idle timeout event=(changed: player)
20190630 092519 engine-mpd: Get new status
20190630 092519 engine-mpd: Generating enhanced metadata
20190630 092519 enhanceMetadata(): Radio station
20190630 092519 engine-mpd: Metadata returned to client: Size=(31)
20190630 092522 engine-mpd: Get initial status
20190630 092522 engine-mpd: UI state=(stop), MPD state=(stop)
20190630 092522 engine-mpd: Wait for idle timeout
20190630 092529 engine-mpd: Get initial status
20190630 092529 engine-mpd: UI state=(stop), MPD state=(stop)
20190630 092529 engine-mpd: Wait for idle timeout
RE: 5.3.1 does not play radios - CallMeMike - 06-30-2019
(06-30-2019, 08:47 AM)feh123 Wrote: Hi
I have just installed 5.3.1 on a RPI 3 connected to a WDMyCloud NAS and a Naim streamer. The system plays my music very well.
However, and after searching for solutions online, I cannot get any of the radio stations to play. I get the same on screen error message "curl failed to decode: [radio station ip address] unable to connect to server.
For info I use a Netgear router in modem only mode (it does the DHCP) and the RPI is wired to this router..............snip.....................
Hold on ... You're saying that the RPi is connected by LAN cable to the a Netgear router set up in MODEM-mode... can you describe the rest of your set-up: other router, any other device requiring Internet connection (laptop, PC, tablet) and how are they and where are they connected...?
Where are the NAS and the streamer connected?
RE: 5.3.1 does not play radios - Tim Curtis - 06-30-2019
The BBC 320K stations are geo-fenced and will not play if you are located outside of UK.
RE: 5.3.1 does not play radios - feh123 - 06-30-2019
Thanks for the fast response. I should have added more detail - I only mentioned the network in passing so my description was rather poor.
My Netgear D7000 has wifi switched off so only supplies wired internet. It is wired to a Netgear Orbi mesh system (in AP mode). This supplies both wired and wifi internet to the majority of my devices.
I have a lot of devices thanks to my use of many RPIs. To help I also use powerlines and the MoOde RPI is wired to the Netgear D7000 via a Netgear powerline 1200.
I have tried using the RPI wifi to connect the network - but I still saw the same error when trying to play the radio.
The RPI is on a static IP address set within the D7000. I have tried DHCP too.
The NAS is also wired directly to the D7000 and is also on a static IP address.
The NAIM (UnitiQute 2) is not connected to the network - I have a Hifiberry Digi+Pro HAT on the RPI and the NAIM just takes the digital output.
This network has always worked without a problem.
Cannot connect to server did sound like a network issue but I cannot find anything wrong.
(06-30-2019, 08:47 AM)feh123 Wrote: Hi
I have just installed 5.3.1 on a RPI 3 connected to a WDMyCloud NAS and a Naim streamer. The system plays my music very well.
However, and after searching for solutions online, I cannot get any of the radio stations to play. I get the same on screen error message "curl failed to decode: [radio station ip address] unable to connect to server.
For info I use a Netgear router in modem only mode (it does the DHCP) and the RPI is wired to this router..............snip.....................
Hold on ... You're saying that the RPi is connected by LAN cable to the a Netgear router set up in MODEM-mode... can you describe the rest of your set-up: other router, any other device requiring Internet connection (laptop, PC, tablet) and how are they and where are they connected...?
Where are the NAS and the streamer connected?
RE: 5.3.1 does not play radios - feh123 - 06-30-2019
(06-30-2019, 12:06 PM)Hi TimI am in the UK. I did try other radios - all gave the same error. I am trying to check if I have firewall type problem. I use Bitdefender.Thanks for responding. Wrote: The BBC 320K stations are geo-fenced and will not play if you are located outside of UK.
RE: 5.3.1 does not play radios - CallMeMike - 07-01-2019
(06-30-2019, 02:53 PM)feh123 Wrote: Thanks for the fast response. I should have added more detail - I only mentioned the network in passing so my description was rather poor.
.................................snip..........................
This network has always worked without a problem.
Cannot connect to server did sound like a network issue but I cannot find anything wrong.
Yes, a weird one... But I am stuck with the impression that in a 'router running off a modem-mode router' set-up all the devices requiring access to the Internet should be connected to the (second not main) router. I have a similar set-up at home and it only works this way... maybe it's my home set-up the odd one out, very possible.
It sounds indeed like it is a network issue, not a MoOde failure. A quick test: connect a laptop directly to the modem-mode router via a LAN cable and check the Internet access. Other than that I would question the router's settings (exclusions, etc).
RE: 5.3.1 does not play radios - feh123 - 07-01-2019
Hi Mike I tried checking my powerline as you suggested and also looking at my firewall. None of these seemed to be the cause. I did however try my MoOde setup again because I had enabled UPnP (as it said this was needed for
radio). When I also enabled DLNA too the radios started working! Not sure if this is a direct causal link but it did
appear to be. Maybe I missed something in the setup notes! Sorry if I wasted everyone's time.